Samsung SyncMaster 400CX-2 User Manual

 
 
 -Ad
justs the Color Tone for the selected display. 
8) Color Temp  
-Ad
justs the Color Temp for the selected display. 
9) Brightness Sensor  
-Ad
justs the Brightness Sensor for the selected display. 
10) Dynamic Contrast 
-Ad
justs the Dynamic Contrast for the selected display. 
The Input source of MagicInfo works only on MagicInfo model. 
Color Temp is only enabled if the Color Tone is set to Off.
The Input source of TV works only on TV model. 
This feature is available only for the displays...

 
 
 2) Contrast 
-Ad
justs Contrast of the selected display. 
3) Brightness 
-Ad
justs Brightness for the selected display. 
4) Red 
-Ad
justs red Color of the selected display. 
- Available  only for NT. 
5) Green  
-Ad
justs green Color of the selected display. 
- Available  only for NT. 
6) Blue  
-Ad
justs blue Color of the selected display. 
- Available  only for NT. 
7) Color Tone  
-Ad
justs the Color Tone for the selected display. 
8) Color Temp  
-Ad
justs the Color Temp for the selected...

 
 
 
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM.
1) Audio 
- Controls audio settings for all input sources.
2) Bass 
-Ad
justs Bass of the selected...

 
Image Lock 
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock  
- Available only for PC, BNC.
2) Coarse 
- Adjusts Coarse of the selected display.
3) Fine 
- Adjusts Fine of the selected display.
4) Position 
- Adjusts Position of the selected display.
5) Auto Adjustment 
- Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of...

 
 
An Info Grid showing several basic data items appears. 
1) Maintenance 
- Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control 
- Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you ad
just using the Auto Lamp Control. 
3) Manual Lamp Control 
- Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you ad...

 
 
 
1) Scroll 
- This function is used to remove the afterimages that occur when a still screen is displayed on the selected 
display  
for a long time. 
2) Pixel Shift 
- This allows the screen to be moved finely at the specified time interval.
3) Safety Screen 
- The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the 
monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set...

1. Click on the Maintenance icon in the Main Icon column to display the Maintenance screen.
1) Video Wall  
- A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole 
picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider) 
- The screen can be divided into. 
You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. 
zSelect a display from Display Selection....

 
 
 
 
 
 
 
 
You may not operate this function in MagicInfo.
The Input source of TV works only on TV model. 
The Maintenance Control function is available only for the displays where the power status is ON.
Troubleshooting 
 
1. The display you wish to control does not appear on the Power Control Info Grid 
- Check the connection of RS232C. (Check if it is properly connected to the Com1 port)
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays...

 
 
  2. Selected one display: Fetches and displays the settings value for the selected display.
3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of 
ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value.