Samsung Plasma TV UN51ES6500 User Manual

 
NAvailable only when Clock Mode  
is set to Manual.
 
●Sleep Timer
Automatically shuts off the TV after a 
preset period of time. (30, 60, 90, 120, 
150, or 180 minutes).
 
NSelect a period of time using your 
remote. To cancel the Sleep Timer , 
select  Off.
 
●On Timer
Set On Timer so that your TV turns on  

automatically at a time and on a day 
of your choosing. You can set up three 
separate On Timer configurations (On 
Timer 1, On Timer 2, On Timer 3) and 
select the source of the content the TV 
plays when it turns on: an air or cable 
channel, a USB device, or a set-top box 
connected to one of the TV's inputs 
(HDMI1, AV1, etc.).
 
NYou must set the clock before you 
can use the On Timer function. 

Setup: Select Off, Once, Everyday, 
Mon~Fri, Mon~Sat, Sat~Sun or  Manual. 
If you select Manual, you can select the 
days you want to activate the timer.
 
NThe  c mark indicates days you’ve 
selected.
Time: Set the time that the TV turns on 
automatically.
Volume: Set the desired loudness.
Source: To select the source of the 
content that will play when the TV  

turns on. You can: 
– Select TV
 and have the TV display a 
specific air or cable channel.
 
– Select USB and have the TV play 
back photo or audio files from a USB 
device.
 
– Select a source on your TV (HDMI1, 
HDMI2, Component, etc.) that you 
have connected a set-top box to, and 
have the TV display a channel from 
the set-top box. 

 
NThe USB device must be connected 
to your TV before you can select 
USB.
 
NIf you select a source other than  TV 
or  USB, you must:
 
ΠHave a cable or satellite set-top 
box attached to that source.
 
ΠSet the set-top box to the 
channel you want to watch when 
the TV goes on.
 
ΠLeave the set-top box turned on. 

 
NWhen you select a source other than 
TV  or USB, the Antenna  and Channel 
options will disappear.
Antenna  (when the Source is set to 
TV ): Select Air  or Cable.
Channel (when the Source is set to  TV): 
Select the desired channel.
Music /  Photo (when the Source is 
set to USB): Select a folder in a USB 
device that contains music that you 
want played when the TV turns on  

automatically or a folder that contains 
music and a folder that contains photo 
files. If you select both, the TV will 
display the photos you selected as it 
plays the music you selected.
To select folders on a USB device, 
follow these steps:1.  
Select  Music. The TV displays 
types or names of the attached USB 
devices. If you have more than one 
USB device attached, the TV lists all  

the devices.
2.
  Select the type or name of the device 
you want to play. A list of folders on 
the selected device appears.
 
NIf there are no folders on your 
device, highlight and select the 
Select  button to the right of the 
device name. The Timer screen 
re-appears with the name of the 
device in the Music field. Go to 
Step 4. 

3. 
Highlight a folder that contains 
music, and then highlight and select 
the Select  button next to it. The 
Timer screen re-appears with the 
folder name in the Music field.
4.  
If you want the TV to display photos 
as the music you chose plays, select 
Photos, and then repeat the same 
process.
5.  
When done, select the Close at the 
bottom of the screen. 

 
NYou must select a music file. You 
cannot select only a photo file.
 
NIf there is no music file on the USB 
device or you don’t select a folder 
containing a music file, the Timer 
function does not operate correctly.
 
NIf there is only one photo file in the 
USB, the slide show will not play.
 
NIf a folder name is too long, the 
folder cannot be selected.
 
NEach USB you use is assigned its