Samsung Plasma TV UN51ES6500 User Manual

the Connected pop-up. When it 
closes, you should see the device 
listed on the Wi-Fi Direct screen 
as connected.
 
NIf you want to disconnect the device, 
select the connected Wi-Fi device, 
and then select Disconnect.
Soft AP
Menu  → Network
 
→  Soft AP
Using this function, you can connect 
the TV to your mobile devices if your  

mobile devices do not support Wi-Fi 
Direct.
The Soft AP screen lets you set the 
options for connecting Wi-Fi devices.
 
●Soft AP
Turns Soft AP on or off. When Soft AP 
is set to On, your mobile devices can 
find the TV's network name in their Wi-
Fi connection list.
 
●Security key
Enter a Security key at least 9  

characters long using the remote 
control. Select Done when finished. 
– If the security key is not at least 
9 characters long, 
Done is not 
available.
 
– To connect a mobile device to the 
TV, you must input the security key 
into the device.
 
– If the network does not operate 
correctly, check the security key 
again. An incorrect security key may  

cause a malfunction.
AllShare Settings
Menu  → Network
 
→  AllShare Settings
AllShare Play  lets you play  Videos, 
Photos, or Music located on your PC or 
your DLNA compatible device on the 
TV using a network connection. It also 
lets you control the TV through these 
devices.
The AllShare Settings screen lists your 
network connected AllShare devices  

and their IP addresses. Through this 
screen, you can allow a device to 
access the TV, deny access, or delete 
the device from the AllShare list.
The AllShare Settings screen only 
displays devices if you have established 
networked connections to AllShare 
devices. Otherwise, it will be empty.
To use the AllShare network function, 
you must install the AllShare network 
software on your PC. For details on set  

up options, refer to "Using the DLNA 
Function".
Device Name
Menu  → Network
 
→  Device Name
Enter a name for this TV. This name will 
be shown on network remote controls 
and devices using  AllShare Play.
 
NA keyboard appears on the screen. 
Key in a name for your TV using 
your remote control. When finished, 
select  Done. 

 
NTo enter letters, highlight and select 
each letter. To enter numbers, 
highlight and select each number or 
press the number buttons on your 
remote.
 
NTo shift to capital letters (or from 
capital letters to lower case), select 
the Caps or Shift button.
 
NTo display symbols and punctuation, 
select 1
. To redisplay letters, select 
1
 again. 

Setting the TimeTime
Menu  → System
 
→  Time
 
NThe time you set will appear when you 
press the INFO  button.
 
●Clock
Set the clock to use the various timer 
features of the TV.
 
NIf you disconnect the power cord, 
you have to set the clock again.
To set the clock, follow these steps: 

1. 
Go  to  Clock screen ( System 
→  Time 
→  Clock
).
2.  
Select  Auto or Manual.
 
ΠIf you selected 
Auto:
The TV will automatically download 
the correct time from a digital 
channel.  
– Select Time Zone, and then select 
your Time Zone.
 
– Select DST (Daylight Savings 
Time). Select On if you want to  

turn the DST adjustment on and 
off manually. Select Off to turn off 
the DST adjustment.
 
NDST and  Time Zone function are 
only available when the Clock 
Mode is set to Auto .
 
ΠIf you selected 
Manual:
 
– The Clock Set screen appears. Set 
the Date
 and Time manually. You 
can set the current date and time 
using your remote.