Runco X 450d Projector User Manual

External Control
Runco X-400d/X-450d Installation/Operation Manual 125 
PREL
IMINARY
COMP 8209 72 0x201148B7 Component video input
HD 1 8209 73 0x201149B6 HD1 video input
HD 2 8209 74 0x20114AB5 HD2 video input
HDMI 1 8209 75 0x20114BB4 HDMI1 video input
HDMI 2 8209 76 0x20114CB3 HDMI2 video input
HDMI 3 8209 77 0x20114DB2 HDMI3 video input
HDMI 4 8209 78 0x20114EB1 HDMI4 video input
HDMI 5 8209 79 0x20114FB0 HDMI5 video input
HDMI 6 8209 80 0x201150AF HDMI6 video input
HDMI 7 8209 81 0x201151AE HDMI7...

External Control
126 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
IR Command List
(Extended Mode)Table 6-3 lists the Extended-mode NEC control codes for the Dimension Digital 
Controller. To use the remote control unit in extended mode, set the address code to 
88999 (refer to Remote Control on page 87). ➤
Table 6-3. NEC Control Codes for the Dimension Digital Controller 
(Extended Mode)
Remote 
Control 
Button NameAddressDataNEC Data 
From Remote 
(Note)Description
ON 8209 65...

External Control
Runco X-400d/X-450d Installation/Operation Manual 127 
PREL
IMINARY
6.3 
Using HDMI CEC 
MessagesThe Dimension Digital Controller accepts and can respond to CEC command messages 
from a disc player, satellite receiver or DVR/set-top box via an HDMI connection. Using 
CEC, the Dimension Digital Controller can perform the following actions:
 Turn itself and the projector on and select the correct input when the source 
component initiates playback of a disc or recorded program. 
 Turn the...

External Control
128 Runco X-400d/X-450d Installation/Operation Manual
PREL
IMINARY
Set Menu Language 0x32–√
Give Physical Address 0x83
–√
Set Stream Path 0x86
–√
Get CEC Version 0x9F
–√
Abort Message 0xFF
–√
User Control Pressed 0x44
–√
User Control Released 0x45
–√
Give OSD Name 0x46
–√
Menu Request 0x8D
–√
Give Device Power Status 0x8F
–√
The Dimension Digital Controller does not transmit HDMI CEC 
control messages from the “HDMI Audio Out” connector. 
Table 6-4. CEC Commands Supported by the...

Specifications
Runco X-400d/X-450d Installation/Operation Manual 129 
PREL
IMINARY
7.1 
X-400d/X-450d 
Projector 
SpecificationsTable 7-1 lists the X-400d/X-450d projector specifications.  
7. Specifications
Table 7-1. X-400d/X-450d Projector Specifications
Projector Type:3-chip Texas Instruments Digital Light Processing™ (DLP), 
SuperOnyx™ DMD™, 3D capable
Processing: Runco Dimension Digital Controller with ViVix IV™ technology 
and BRiC (Backup, Recovery and Clone) tool
Native Resolution:Full HD 1920 x...

Specifications
130 Runco X-400d/X-450d Installation/Operation Manual
PRELI
MINARY
Brightness and Contrast 
(2D):Cinema Standards Measurement System (CSMS) 
Specifications - X-400d
- Brightness: 52 foot-Lamberts (fL)
- Contrast Ratio: >250:1
CSMS Specifications - X-450d
- Brightness: 94 foot-Lamberts (fL)
- Contrast Ratio: >200:1
These measurements are taken from the projector in a controlled, 
home theater environment. All measurements are made to 
ANSI/NAPM IT7.228-1997 specifications using a 1.0 gain,...

Specifications
Runco X-400d/X-450d Installation/Operation Manual 131 
PREL
IMINARY
Refresh Rate:50 Hz or 60 Hz (2D content)
100 Hz or 120 Hz (3D content)
3D Technology:Frame sequential, active shutter
Dimensions:See Figure 7-1
Weight (without lens):55.5 lbs. (25.2 kg)
Limited Warranty: Projector: (2) Two years parts and labor from the date of 
shipment from Runco. Extended RuncoCare™, Red 
Carpet™, and PremierCare™ also available.
Lamp: 1000 hours or six (6) months, whichever comes first 
(US and Canada...

Specifications
132 Runco X-400d/X-450d Installation/Operation Manual
PRELI
MINARY
7.2 
Dimension Digital 
Controller 
SpecificationsTable 7-2 lists the Dimension Digital Controller specifications.  
Table 7-2. Dimension Digital Controller Specifications
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema, 
Native, Auto Cinema
Video Standards: DisplayPort with HDCP
 HDMI and DVI with HDCP for digital video
 Component and RGB HDTV (1080p, 1080i, 720p)
 Component and RGB EDTV (576p,...

Specifications
Runco X-400d/X-450d Installation/Operation Manual 133 
PREL
IMINARY
Dimensions:Width = 17.50 inches (444.5 mm)
Depth = 17.68 inches (449.0 mm)
Height = 3.75 inches (95.3 mm)
Weight: 17.6 lbs. (8.00 kg)
Regulatory Approvals:cTUVus, FCC class B, CE, RoHS, China RoHS, WEEE, 
C-Tick, CCC, local conformances as required
Limited Warranty: Two (2) years parts and labor from the date of shipment from 
Runco.
Specifications are subject to change without notice. 
Table 7-2. Dimension Digital...

Specifications
134 Runco X-400d/X-450d Installation/Operation Manual
PRELI
MINARY
7.3 
Supported TimingsTable 7-3 lists the signal types supported by each input on the Dimension Digital 
Controller. 
Table 7-3. Supported Signal Timings by Input
Format ResolutionRefresh 
Rate (Hz)Horizontal 
Frequency 
(kHz)Pixel Frequency 
(MHz)Supported? (√ = Yes, – = No)
HD 1
HD 2
HDMI [1 ... 8]
DisplayPort
Component
SCART
Composite 1
Composite 2
Composite 3
Supported 3D Modes
1080i SBS 
(Side-by-
Side)1920x108050.00...