Ricoh Mp C5503 User Guide

3.Carefully push the paper tray fully in.
• Various sizes of paper can be loaded in Trays 2–4 by adjusting the positions of side fences and
end fence. For details, see "Changing the Paper Size in Trays 2 - 4", Copy/ Document Server
.
• You can load envelopes in Trays 2–4. When loading envelopes, place them in the correct orientation. For details, see page 155 "Envelopes".
Loading Paper into Paper Trays
131CVA011     

Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that
cannot be loaded in the paper trays.
• The maximum number of sheets you can load at the same time depends on paper type. Do not stack paper over the limit mark. For the maximum number of sheets you can load, see page 144"Recommended Paper Sizes and Types".
1. Open the bypass tray.
2.Load the paper face down until you hear the beep.
3. Align the paper guides to the...

• Certain types of paper might not be detected properly when placed on the bypass tray. If thishappens, remove the paper and place it on the bypass tray again.
• Pull the extender out when loading sheets larger than A4
, 8 1
/ 2 × 11 in the bypass tray.
• When loading thick paper, thin paper, or OHP transparencies, specify the paper size and the paper type.
• Letterhead paper must be loaded in a specific orientation. For details, see page 141 "Loading Orientation-fixed Paper or Two-sided Paper"....

Specifying regular sizes using the control panel
1.Press the [User Tools/Counter] key.
2.Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Select the paper size.
5.Press [OK].
6. Press the [User Tools/Counter] key.
9. Adding Paper and Toner
134CUP009   

Specifying a custom size paper using the control panel
1.Press the [User Tools/Counter] key.
2. Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Press [Custom Size].
If a custom size is already specified, press [Change Size].
5. Press [Vertical].
6. Enter the vertical size using the number keys, and then press [
].
7.Press [Horizontal].
8. Enter the horizontal size using the number keys, and then press [
].
9. Press [OK] twice.
10. Press the [User Tools/Counter] key.
Specifying thick...

• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with theprint side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1. Press the [User Tools/Counter] key.
2.Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size], and then specify the paper size.
4. Press [OK].
5. Press [
Next].
6. Press [Paper Type: Bypass Tray].
7. Select the proper items, according to the paper type you want to specify.
• Press [OHP (Transparency)]...

• For details about paper thickness, see "Tray Paper Settings", Connecting the Machine/ SystemSettings
.
Loading Paper into the Bypass Tray
137   

Loading Paper into Tray 3 (LCT)
(mainly Europe and Asia)
Tray 3 (LCT) can hold A4
 paper only. If you want to print on 8 1
/ 2 × 11 from Tray 3 (LCT), contact
your service representative.
(mainly North America)
Tray 3 (LCT) can hold 8 1
/ 2 × 11
 paper only. If you want to print on A4 from Tray 3 (LCT), contact
your service representative.
• When paper loaded in the right side of Tray 3 (LCT) runs out, paper on the left is automatically shifted to the right. Do not pull out Tray 3 (LCT) while the tray is...

• Left half of the tray pulled out
3.Carefully push the paper tray fully in.
• You can load paper even if Tray 3 (LCT) is in use. It is okay to pull out the left half of the tray while
Tray 3 (LCT) is in use.
• Load 30 or more sheets of paper in the left half of the tray.
Loading Paper into Tray 3 (LCT)
139CVA019    

Loading Paper into the Large Capacity Tray
(LCT)
(mainly Europe and Asia)
The large capacity tray (LCT) can hold A4
 paper only. If you want to print on 8 1
/ 2 × 11 or B5 JIS
from the large capacity tray (LCT), contact your service representative.
(mainly North America)
The large capacity tray (LCT) can hold 8 1
/ 2 × 11
 paper only. If you want to print on A4 or B5 JIS
from the large capacity tray (LCT), contact your service representative.
• Check the paper edges are aligned at the left side.
1. Check...