Ricoh Gr 1 Instruction Manual

							1
Various Shooting Functions
79
Playing Back Movies
1 Press the 6 button.
The camera goes into playback mode.
2 Select a movie with the #$ 
buttons.
Movies are indicated by a 3 icon.
The first frame of the movie is displayed as 
a still image.
3 Press the ! button.
Playback starts.
A progress indicator and the elapsed time 
are shown.
The following operations can be performed.
Pause/resume! button
Stop " button
Adjust Volume X/Y button
Slow Playback/Slow Rewind #$ buttons while playback is paused
Fast Forward/Rewind #$ buttons during playback
Save Still Image Fn2 button while playback is paused
 Note ------------------------------------------------------------------------\
-----------------------------------
•	 If	the	Fn2	 button	 is	pressed	 while	playback	 is	paused,	 the	still	 image	 being	shown	 can	be	saved	 as	a	
JPEG file.
•	 The	Fast	Forward/Rewind	speed	switches	each	time	the	button	is	pressed.
•	 QuickTime	is	required	to	play	back	movies	that	have	been	transferred	to	a	computer. 
						

							1
Various Shooting Functions
80
Clipping Movies
The unnecessary parts at the beginning or end of a movie can be deleted, 
and the movie can be saved as a new file.
1 Bring up the movie to be edited in playback mode, and then 
press the MENU/OK button.
The [Playback] menu appears.
2 Select [Clip Movie File], and then press the $ button.
The [Clip Movie File] screen appears.
3 Press the ADJ. lever to select either 
the beginning or the end.
The point highlighted in yellow indicates 
which has been specified.
If the Fn2 button is pressed while this screen 
is shown, an explanation of the operations 
appears. Pressing the Fn2 button again 
brings back the previous screen.
4 Use the #$ buttons or press the ADJ. lever to move the point to 
be deleted.
The yellow point moves. You can specify 1-second units.
5 Press the MENU/OK button.
A new movie file is saved with the unnecessary parts deleted. 
						

							2
Playback Functions
81
2 Playback Functions
Displaying Images in Thumbnail View
Pressing the 8 (X)/9 (Y) button in playback mode displays multiple im-
ages in thumbnail view.
20-frame view81-frame view
The following operations are possible.
!"#$ buttonSelects an image.
ADJ. Lever Displays the selected image in single image view.
DISP. button Changes between single image selection and page selection.
Displaying Images in a Slide Show
You	can	display	shot	images	sequentially.
Select [Slide Show] in the [Playback] menu and then press the $ button to 
start a slide show.
If you want to stop the slide show in progress, press any button. The slide 
show is displayed repeatedly until stopped.
 Note ------------------------------------------------------------------------\
-----------------------------------
•	 Each	still	image	is	displayed	for	three	seconds.
•	 In	the	case	 of	a	movie,	 all	of	the	 frames	 of	the	 movie	 are	played	 back	and	then	 the	next	 image	 is	
displayed.  
						

							2
Playback Functions
82
Displaying Images in Enlarged View
You	can	display	still	images	enlarged.
The following operations are possible.
8 (X) button/
Turn the up-down dial rightEnlarges the image.
9 (Y) button/
Turn the up-down dial left Reduces the image.
!"#$ buttons Moves the area to display enlarged.
ADJ. Lever Press: The image is enlarged in one go to the magnification (4x, 8x, or 16x) set 
in	[One	Press	Zoom	Ratio]	in	the	[Setup]	menu.
Push down left or right: Displays the previous or next image in enlarged view 
(returns to actual size in the case of a movie).
MENU/OK Button In	
enlarged	 view:	Enlarges	 the	image	 to	the	 magnification	 set	in	[One	 Press	
Zoom	Ratio].
DISP. button Information display on " information display off
 
Note  ------------------------------------------------------------------------\
-----------------------------------
•	 If	you	set	[Target	 Zoom	Play]	in	the	 [Setup]	 menu	to	[On],	 the	image	 is	enlarged	 centering	 on	the	
position the target shifted to during shooting.
•	 The	maximum	magnification	of	enlarged	view	differs	depending	on	the	size	of	the	image.
•	 Movies	cannot	be	enlarged.
•	 The	 functions	 of	the	 up-down	 dial	and	 ADJ.	 lever	 during	 playback	 mode	can	be	changed	 in	[Play Mode 
Dial	Options]	in	the	[Key	Custom	Options]	menu.
Up-down Dial ADJ. Lever
Setting	1	[default	setting] Enlarged view Next/previous enlarged frame
Setting 2 Moves enlarge position up/down Moves enlarge position left/right 
						

							2
Playback Functions
83
Organizing Files
Deleting Files
Deleting One File
1 Display the image to delete in playback mode.
2 Press the D button.
3 Use the !" buttons to select [Delete 
One].
You	 can	change	 the	file	with	 the	#$ buttons.
4 Press the MENU/OK button.
The file is deleted.
To delete another file, repeat steps 3 to 4.
To end the process, select [Cancel].
Deleting All Files
1 Press the D button in playback mode.
2 Use the !"  buttons to select [Delete All] and then press the 
MENU/OK button.
The deletion confirmation screen appears.
3 Use the $ button to select [Yes] and then press the MENU/OK 
button.
Deleting Multiple Files Simultaneously
1 Press the D button in playback mode.
When in 20-frame or 81-frame view, go to step 3. 
						

							2
Playback Functions
84
2 Select [Delete Multi] and then press the MENU/OK button.
3 Select [Sel. Indiv.] or [Sel. Range] and then press the MENU/OK 
button.
4 Use the !"#$ buttons to select files and then press the 
MENU/OK button.
If you selected [Sel. Range], select only the file that is the starting point of the 
range.
The trash symbol is displayed in the upper left 
corner of the file.
Pressing the ADJ. lever switches between [Sel. 
Indiv.] and [Sel. Range].
If you selected [Sel. Indiv.], go to step 6.
5 Use the !"#$ buttons to select the 
file that is the ending point of the 
range and then press the MENU/OK 
button.
Repeat steps 4 to 5 to specify all of the ranges.
If you selected a file by mistake, you can de-
select it by pressing the ADJ. lever to return 
to the screen for deleting one file at a time, 
selecting	the	file,	and	pressing	the	MENU/OK	button.
6 Press the D button.
The deletion confirmation screen appears.
7 Use the $ button to select [Yes] and 
then press the MENU/OK button.
A message appears to indicate processing is 
being performed, and then the thumbnail 
view screen reappears when deleting is com-
plete.
 Note  ------------------------------------------------------------------------\
-----------------------------------
•	 A	folder	cannot	be	deleted. 
						

							2
Playback Functions
85
Setting Protection
You	can	protect	files	to	prevent	them	from	being	deleted	accidentally.
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 If	you	select	[Format]	in	the	[Setup]	menu,	protected	images	will	also	be	deleted.
Setting Protection for One File
1 Display the image to protect in playback mode and then press 
the MENU/OK button.
The [Playback] menu appears.
2 Select [Protect] and then press the $ button.
3 Use the !" buttons to select [1 File].
You	can	change	 the	file	with	 the	#$ buttons.
4 Press the MENU/OK button.
Protection is set and the symbol appears on 
the playback screen.
Performing the same operation for the pro -
tected image will cancel protection. 
						

							2
Playback Functions
86
Setting/Canceling Protection for All Files
1 Select [Protect] in the [Playback] menu and then press the $ 
button.
2 Select [Select All] or [Cancel All] and then press the MENU/OK 
button.
Setting Protection for Multiple Files Simultaneously
1 Select [Protect] in the [Playback] menu and then press the $ 
button.
When in 20-frame or 81-frame view, go to step 3.
2 Select [Sel. Multiple] and then press the MENU/OK button.
3 Select [Sel. Indiv.] or [Sel. Range] and then press the MENU/OK 
button.
4 Use the !"#$ buttons to select files and then press the MENU/
OK button.
If you selected [Sel. Range], select only the file that is the starting point of 
the range.
When	canceling	protection,	press	the	MENU/OK	button	again.
Pressing the ADJ. lever switches between [Sel. Indiv.] and [Sel. Range].
If you selected [Sel. Indiv.], go to step 6.
5 Use the !"#$ buttons to select 
the file that is the ending point of 
the range and then press the MENU/
OK button.
Repeat steps 4 to 5 to specify all of the ranges.
If you select files with protection already set, 
protection will be canceled.
6 Press the Fn2 button.
A message appears to indicate processing is being performed, and then the 
thumbnail view screen reappears when the setting is complete.
7 Press the MENU/OK button.
The [Playback] menu reappears. 
						

							2
Playback Functions
87
Copying the Images in Internal Memory to a Card
You	can	copy	 the	still	 images	 and	movies	 stored	in	internal	 memory	 to	a	
memory card.
1 Insert a memory card.
2 Select [Copy to Card from Internal Memory] in the [Playback] 
menu and then press the $ button.
A message appears to indicate processing is being performed, and then the 
thumbnail view screen reappears when copying is complete.
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 If	 there	 is	not	 enough	 space	available	 on	the	 copy	 destination	 memory	card,	a	message	 indicating	 that	
there is insufficient space appears.
•	 Copying	from	a	memory	card	to	internal	memory	is	not	possible.
Correcting and Processing Images
You	 can	correct	 and	process	 shot	images	 and	then	 save	them	 as	new	 images.
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 Only	 JPEG	files	that	 were	 shot	with	 this	camera	 can	be	corrected	 and	processed.	 Raw	files,	 movies,	 and	
still images saved from movies cannot be corrected and processed.
•	 If	you	correct	and	process	images	repeatedly,	image	quality	will	deteriorate.
Reducing the Size of Images
[Resize] in the [Playback] menu reduces still images to s or u. 
						

							2
Playback Functions
88
Trimming Images
You	can	trim	the	edges	of	images	and	then	save	the	images.
1 Display the image to trim in playback mode and then press the 
MENU/OK button.
The [Playback] menu appears.
2 Select [Trim] and then press the $ button.
3 Specify the range to trim.
The following operations are possible.
X/Y buttonChanges the trimming size.
!"#$ button Moves the trimming frame.
ADJ. Lever Changes the aspect ratio of the trimming frame (4:3/3:2/1:1).
Fn2 button Displays the operating procedure.
4 Press the MENU/OK button.
The trimmed image is saved as a new image.
 Note ------------------------------------------------------------------------\
-----------------------------------
•	 The	image	 size	after	 trimming	 differs	depending	 on	the	 size	 of	the	 original	 image	and	the	size	 of	the	
trimming frame.