Ricoh Aficio MP2500SP User Manual
Here you can view all the pages of manual Ricoh Aficio MP2500SP User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
Network Settings 13 1 Network Settings This section describes the network settings you can change with User Tools (Sys- tem Settings). Make settings according to functions you want to use and the in- terface to be connected. Important ❒These settings should be made by the system administrator, or with the ad- vice the system administrator. Settings Required to Use the Printer/LAN-Fax This section lists the settings required for using the printer or LAN-Fax function. Ethernet This section lists the...
Page 22
![Page 22
Connecting the Machine
14
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 1394 interface...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-21.png "Page 22
Connecting the Machine
14
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 1394 interface...")
Connecting the Machine 14 1 Note ❒IPv6 can be used only for the printer function. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. Reference p.58 “Interface Settings” IEEE 1394 (IPv4 over 1394) This section lists the settings required for using the printer or LAN-Fax function with IEEE 1394 interface...
Page 23
![Page 23
Network Settings
15
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-22.png "Page 23
Network Settings
15
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected...")
Network Settings 15 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using the printer or LAN-Fax function with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected...
Page 24
Connecting the Machine 16 1 Settings Required to Use Internet Fax This section lists the settings required for using Internet Fax. Ethernet This section lists the settings required for using Internet Fax. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required...
Page 25
![Page 25
Network Settings
17
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-24.png "Page 25
Network Settings
17
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When...")
Network Settings 17 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the send function. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒When...
Page 26
![Page 26
Connecting the Machine
18
1
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When [SMTP Authentication] is set to [On], also make setting for [Administrators
E-mail Address].
❒[E-mail...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-25.png "Page 26
Connecting the Machine
18
1
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When [SMTP Authentication] is set to [On], also make setting for [Administrators
E-mail Address].
❒[E-mail...")
Connecting the Machine 18 1 Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the send function. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒When [SMTP Authentication] is set to [On], also make setting for [Administrators E-mail Address]. ❒[E-mail...
Page 27
Network Settings 19 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Internet Fax with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required...
Page 28
![Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-27.png "Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3...")
Connecting the Machine 20 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. ❒[SMTP Server] and [Fax E-mail Account] must be specified in order to use the send function. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3...
Page 29
![Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port]....](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-28.png "Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port]....")
Network Settings 21 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]....
Page 30
![Page 30
Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4...](http://img.usermanuals.tech/thumb/64/37676/w300_Ricoh_Aficio_MP2500SP-29.png "Page 30
Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4...")
Connecting the Machine 22 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending e-mail with IEEE 1394 inter- face cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4...