Philips 42pfl8404 User Manual

1.1.7      ECO  -  Green
4/4
Thanks to our environmental effort, this TV has
been awarded the European Ecolabel —the flower-
(www.ecolabel.eu).
You can find detailed information on standby energy
consumption, warranty policy, spare parts and recycling
of this TV on the Philips website for your country at
www.philips.com End of use
To inform yourself on the correct disposal of the TV and
batteries, read chapter Getting started > Important > End of
use. 

1.2.1      Switch  on
1/2
It takes a couple of seconds for the TV to start up.
If the red standby indicator is off, press O at the right of
the TV to switch it on.
Press O again to switch off.
... 

1.2.1      Switch  on
2/2
The white LED flashes during start-up and switches off
completely when the TV is ready for use. The Ambilight
shows the TV is on.
You can set the white LED on permanently or set its
brightness. Press h> Setup > Installation > Preferences >
LightGuide brightness. 

1.2.2   Volume
 V
The keys on the side of the TV allow basic TV control.
You can adjust the volume with Volume + / - on the side of
the TV. 

1.2.3   Programme P
The keys on the side of the TV allow basic TV control.
You can switch TV channels with Program + / - on the side
of the TV. 

1.2.4   Source key
The keys on the side of the TV allow basic TV control.
To open the Source list to select a connected device, press
Source s. Press Source s again to select a connected
device in the list. After a few seconds the TV switched to
the selected device. 

1.2.5   IR sensor
Always take care to point the remote control at the remote
control infra red sensor on the front of the TV. 

1.3.1   VESA info
Your TV is prepared for VESA compliant wall mounting. A
VESA wall mount bracket is not included.
Use the following VESA code to purchase the bracket.
32” / 80cm VESA MIS-F 200, 200, 6
37” / 94cm VESA MIS-F 200, 200, 6
42” / 107cm VESA MIS-F 400, 400, 6
47” / 119cm VESA MIS-F 400, 400, 8
When mounting the TV on a wall, always use all 4 fixing
points on the back of the TV. Use a screw length as shown
in the drawing. 

1.3.2   Unmount the stand
Before you lift the TV from the stand, unscrew the 4 stand screws on the back of the TV. 

1.4.1   Full High Definition LCD display
This TV is equipped with a full High Definition (HD) display.
A full HD 1920x1080p, the highest resolution of HD sources.
This display offers a brilliant flicker free progressive scan
picture with optimum brightness and superb colours.
To enjoy HD TV you need to get programmes in HD first. If
you are not watching HD programmes, the picture quality
will be that of a normal TV.
Read Get started > Important > Enjoy HD TV