Philips 26pf9531 User Manual

Function keys at the bottom of the screen
Details to display a description of the selected file
or directory
Transitions to select if you like to apply a transition
during a slide show 
Slide time to select the duration a picture will be
displayed in a slide show
Rotate to rotate a picture
Repeat one/all to repeat the playback of a music file
Shuffle to shuffle music collections in a random way
Zoom to select one of the zoom magnifications
(x1, x2, x4) with the cursor up/down.
Additionally you can shift...

Most TV channels broadcast information via teletext.
This TV has a 1200 pages memory that will store most
broadcasted pages and subpages to reduce waiting time. After
each programme change, the memory is refreshed.
The main index page appears on the screen.
Select a Teletext page

Hypertext
With hypertext you can quickly jump to a pagenumber or
search for a specific word shown on the current teletext
page.
1. Press the 
OKkey to highlight the first word or a number
on the page.
2. Use the cursor up/down, left/right to select any other word
or number you want to search for.
3. Press the 
OKkey to confirm. The search starts.
>A message appears at the bottom of the screen to
indicate the searching, or that the word or page is not
found.
4. Use the cursor up until the top of the page...

To make video and audio connections EN
34
Tip: use the inputs that are available on your equipment that provide the best video or audio
performance, as below.
Note: your TV comes with all types of connectors with the exception of the DVI connector but
some of your equipment may be equipped with this type. In this case youll need a DVI to HDMI
adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer.
Warning: be sure to connect the DVI output connector first, then...

Camera, Camcorder, Game
1. Connect your camera, camcorder or game as
shown.
2. Connect to 
VIDEO2and AUDIO L3for
mono equipment. For stereo equipment also
connect 
AUDIO R3.
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables with
the 
S-VIDEOinput 1and AUDIOinputs
3.
Headphone
1. Insert the plug into the headphone socket L
as shown.
2. The headphone impedance must be between 8
and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone
volumeto...

36
EN
Pr Pb Y
R B G
AUDIO L/RH VEXT2 EXT1EXT3
COMMON INTERFACE75HDMI 1  HDMI 2  ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUT AUDIODIGITAL
Pr Pb Y
R B G
AUDIO L/R
H V
EXT2 EXT1
EXT3
FACE
75
HDMI 1  HDMI 2  ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUTAUDIODIGITAL
CE
AUDIO 
OUT DIGITAL
AUDIO
IN
VGA
DVI
DVI
DVI
CABLE
VCR
DVD player
Satellite
receiver
1 DVD recorder - 1 VCR 
2 DVD recorders
2 VCRs
Decoder
PC DVIPC - VGA
DVD player
Cable box DVD player...

Connect a VCR or DVD recorderEN
37
With a eurocable
1. Connect the aerial cables 1and 2as
shown.
2. Connect the eurocable 3as shown.
3. Make your selection of the source to which
the VCR has been connected in the Installation
menu, Select your connections, p. 26.
With the aerial cable only
1. Connect the aerial cables 1and 2as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Manual installation, p. 23.
See also the handbook of your recorder.
Connect a...

Note: you can not record signals from equipment connected to the YPbPrinput.
Connect two VCRs or VCR and DVD recorderEN
38
With eurocables
1. Connect the aerial cables 1and 2as
shown.
2. Connect your VCRs or DVD-recorder to
EXT1and 2with the eurocables 4and 5.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26, and link it to 
EXT1or 2.
With aerial cables only
1. Connect the aerial cables 1,2and 3 as
shown.
2. Tune in your recorder’s testsignal and store...

Connect a DVD player, Cable box or game consoleEN
39
Note: in case of any problems, see Annex 4:
Issues referring to connected peripherals with a
HDMI connector, p. 52.
With a HDMI connector
HDMI is the leading new standard for Digital video
and audio interconnection.
1. Connect your equipment with the 
HDMI
connector.
2. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26, and link it to 
HDMI 1or 2.
Tip: if necessary, you can adjust the picture position to...

Connect a DVD player, a satellite receiver or Cable box EN
40
With Component Video Connectors
1. Connect the three separate component video
cables 1to the YPbPr jacks on the DVD
player and to the Y,Pband Prjacks of 
EXT3
on the TV.
2. Connect the audio cable 2to the digital out
of the equipment and to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 26. Also select Digital audio inin the same
Connections menu and...