Panasonic Wma Mp3 Cd Player Receiver Cq C8401u Operating Instructions

							®
WMA MP3 CD Player/Receiver with Full Dot Matrix Display
Récepteur/lecteur CD avec afficheur matriciel et lecture WMA/MP3
Reproductor de CD, WMA y MP3/receptor con pantalla de matriz de puntos completa
CQ-C8401U/C8301U
C7401U/C7301U
Operating InstructionsManuel d’instructions
Manual de InstruccionesOperating Instructions
Manuel d’instructions
Manual de Instrucciones
SRC
CQ-C8401U
(CQ-C8401U)
¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product
and keep this manual for future reference.¡Prière de lire attentivement ces instructions (y compris la “Garantie limitée” et le “Répertoire des services à la clientèle”) avant
d’utiliser ce produit et conserver ce mode d’emploi pour s’y référer ultérieurement.¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
YEFM285591A         ND1104-1124          Printed in China
Imprimé en Chine
Impreso en China Panasonic Consumer
Electronics Company,
Division of Matsushita Electric
Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.comPanasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.comPanasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
CQ-C8401U/C8301U/C7401U/C7301U®
TEXT 
						

							3EnglishSafety Information
CQ-C8401U/C8301U/C7401U/C7301U
2
Safety Information
CQ-C8401U/C8301U/C7401U/C7301U
Warning
Observe the following warnings when using
this unit.❑
The driver should neither watch the display nor
operate the system while driving.Watching the display or operating the system will distract
the driver from looking ahead of the vehicle and can cause
accidents. Always stop the vehicle in a safe location and use
the parking brake before watching the display or operating
the system.❑
Use the proper power supply.This product is designed for operation with a negative
grounded 12 V DC battery system. Never operate this prod-
uct with other battery systems, especially a 24 V DC battery
system.❑
Keep batteries and insulation film out of reach of
infants.Batteries and insulation film can be ingested, so keep them
out of the reach of infants. If an infant ingests a battery or
insulation film, please seek immediate medical attention.❑
Protect the Deck Mechanism.Do not insert any foreign objects into the slot of this unit.❑
Do not disassemble or modify the unit.Do not disassemble, modify the unit or attempt to repair the
product  yourself. If the product needs to be repaired, con-
sult your dealer or an authorized Panasonic Servicenter.❑
Do not use the unit when it is out of order.If the unit is out of order (no power, no sound) or in an
abnormal state (has foreign objects in it, is exposed to
water, is smoking, or smells), turn it off immediately and
consult your dealer.❑
The remote control unit should not lie about in the
car.If the remote control unit lies about, it could fall on the floor
while driving, get wedged under the brake pedal, and lead to
a traffic accident.❑
Refer fuse replacement to qualified service person-
nel.When the fuse blows out, eliminate the cause and have it
replaced with the fuse prescribed for this unit by a qualified
service engineer. Incorrect replacement of the fuse may lead
to smoke, fire, and damage to the product.
Observe the following warnings when
installing.❑
Disconnect the lead from the negative (–) battery
terminal before installation.Wiring and installation with the negative (–) battery terminal
connected may cause electrical shock and injury due to a
short circuit.
Some cars equipped with the electrical safety system have
specific procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND
PERSONAL INJURY OR DEATH.❑
Never use safety-related components for installa-
tion, grounding, and other such functions.Do not use safety-related vehicle components (fuel tank,
brake, suspension, steering wheel, pedals, airbag, etc.) for
wiring or fixing the product or its accessories.❑
Installing the product on the air bag cover or in a
location where it interferes with airbag operation is
prohibited.
❑
Check for piping, gasoline tank, electric wiring, and
other items before installing the product.If you need to open a hole in the vehicle chassis to attach or
wire the product, first check where the wire harness, gaso-
line tank, and electric wiring are located. Then open the hole
from outside if possible.❑Never install the product in a location where it inter-
feres with your field of vision.❑
Never have the power cord branched to supply other
equipment with power.
❑
After installation and wiring, you should check the
normal operation of other electrical equipment.The continuation of their using in abnormal conditions may
cause fire, electrical shock or a traffic accident.❑
In the case of installation to an airbag-equipping
car, confirm warnings and cautions of the vehicle
manufacturer before installation.
❑
Make sure the leads do not interfere with driving or
getting in and out of the vehicle.
❑
Insulate all exposed wires to prevent short circuit-
ing.
Caution
Observe the following cautions when using this
unit.❑
Keep the sound volume at an appropriate level.Keep the volume level low enough to be aware of road and
traffic conditions while driving.❑
Do not insert or allow your hand or fingers to be
caught in the unit.To prevent injury, do not get your hand or fingers caught in
moving parts or in the disc slot. Especially watch out for
infants.❑
This unit is designed for use exclusively in automo-
biles.
❑
Do not operate the unit for a prolonged period with
the engine turned off.Operating the audio system for a long period of time with the
engine turned off will drain the battery.❑
Do not expose the unit to direct sunlight or exces-
sive heat.Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.❑
Do not use the product where it is exposed to water,
moisture, or dust.Exposure of the unit to water, moisture, or dust may lead to
smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on rainy
days.Observe the following cautions when
installing.❑
Refer wiring and installation to qualified service
personnel.Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from your
own installation of the unit.❑
Follow the instructions to install and wire the prod-
uct.Not following the instructions to properly install and wire the
product could cause an accident or fire.❑
Take care not to damage the leads.When wiring, take care not to damage the leads.  Prevent
them from getting caught in the vehicle chassis, screws, and
moving parts such as seat rails. Do not scratch, pull, bend or
twist the leads. Do not run them near heat sources or place
heavy objects on them. If leads must be run over sharp
metal edges, protect the leads by winding them with vinyl
tape or similar protection.❑
Use the designated parts and tools for installation.Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those sup-
plied or designated may result in internal damage to the unit.
Faulty installation may lead to an accident, a malfunction or
fire.❑
Do not block the air vent or the cooling plate of the
unit.Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.
❑
Do not install the product where it is exposed to
strong vibrations or is unstable.Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.❑
Installation AngleThe product should be installed in a horizontal position with
the front end up at a convenient angle, but not more than
30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit must be installed.
Consult your dealer for further details.❑
Wear gloves for safety. Make sure that wiring is
completed before installation. 
❑
To prevent damage to the unit, do not connect the
power connector until the whole wiring is complet-
ed.
❑
Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)Observe the following cautions when handling
the battery for the remote control unit.●Use only specified battery (CR2025).●Match the polarity of the battery with the (+) and (–) marks
in the battery case.●Replace dead battery as soon as possible.●Remove the battery from the remote control unit when not
using it for an extended period of time.●Insulate the battery (by placing them in a plastic bag or cov-
ering them with vinyl tape) before disposal or storage. ●Dispose of the battery according to the local regulations.●Do not disassemble, recharge, heat or short the battery. Do
not throw a battery into a fire or water.In case of battery leakage●Thoroughly wipe the battery liquid off the battery case and
insert new battery.●If any part of your body or clothing comes into contact with
battery liquid, wash it with plenty of water.●If battery liquid comes into contact with your eyes, wash
them with plenty of water and get immediate medical atten-
tion.
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in severe injury or death.
■Read the operating instructions for the unit and all other com-
ponents of your car audio system carefully before using the
system. They contain instructions about how to use the sys-
tem in a safe and effective manner. Panasonic assumes no
responsibility for any problems resulting from failure to
observe the instructions given in this manual.
■This manual uses pictographs to show you how to use the
product safely and to alert you to potential dangers resulting
from improper connections and operations. The meanings of
the pictographs are explained below. It is important that you
fully understand the meanings of the pictographs in order to
use this manual and the system properly.
Warning
This pictograph intends to alert you to the pres-
ence of important operating instructions and
installation instructions. Failure to heed the
instructions may result in injury or material dam-
age.
Caution 
						

							5
Before Reading These Instructions
EnglishSafety Information, Before Reading These Instructions
CQ-C8401U/C8301U/C7401U/C7301U
4
Safety Information (continued)
CQ-C8401U/C8301U/C7401U/C7301U
Caution
THIS PRODUCT IS A CLASS I
LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
The following applies only in the U.S.A.Part 15 of the FCC RulesFCC Warning:Any unauthorized changes or modifications to this
equipment would void the users authority to operate
this device.
Accessories
SEL
SRCSRCBANDBANDMUTEMUTE23 1
5
8
06 4
9 7#
VOLVOLDISPCAR AUDIOMENU
SEL POWER
SOURCE
SRC
SET
BAND MUTE23 1
5
8
06 4
9 7#
VOL
RANDOM
NUMBER TUNE TUNESCAN REPEAT
DISP
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXOO-OOOOO
Remote Control Unit(including a battery)
(CR2025) Operating
Instructions
(YEFM285591)Installation
Instructions
(YEFM293907)Owners
Information Card
Removable Face
Plate Case
Mounting CollarTrim Plate Power ConnectorInstruction kit
Qty: 1 set(YEFA131646)
Qty: 1
(EUR7641010)
Qty: 1(YEFX0217222)
Qty: 1(YEFC05654)
Qty: 1 (YEAJ02871)
Qty: 1
Lock Cancel Plate
Mounting Bolt
Tapping Screw
(5 mmø x 16 mm)
Notes:
¡The number in parenthesis underneath each accessory part name is the part number
for maintenance and service.
¡Accessories and their parts numbers are subject to modification without prior notice
due to improvements.
¡Mounting Collar and Trim Plate  are mounted on the main unit at shipment.
Hex. Nut
(5 mmø)
(YEP0FZ5701)
Qty: 1 set
Rear Support Strap
(YEFG04019)
Qty: 1
This operating instruction manual is for 4 models CQ-C8401U, CQ-C8301U CQ-C7401U and CQ-C7301U.
The difference among these models’ are mentioned below.
All screens and main body illustrations in this book represent CQ-C8401U unless otherwise specified.
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company. We
know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have
built into it, you too will be proud to be a member of our family.
No No Yes Yes CH/AUX2-IN Cord *
1
No No Yes Yes AUX1-IN Cord *
2
Yes Yes No No CH/AUX-IN Cord *
1
2.5 V 5 V 5 V 5 V Preout2.5 V 5 V 5 V 5 V Subwoofer-output50 W 50 W 50 W 60 W Maximum Power OutputCQ-C7301U CQ-C7401U CQ-C8301U CQ-C8401U
Models
Features*1 You can connect only one of a changer, an XM receiver and other commercially available portable audio
equipment.
*2 You can connect commercially available portable audio equipment and the like.
Before Reading These Instructions
Differences Among 4 Models 
						

							7
CQ-C8401U/C8301U/C7401U/C7301U
6
Before Reading These Instructions
CQ-C8401U/C8301U/C7401U/C7301U
U.S.A.PANASONIC CONSUMER ELECTRONICS COMPANY, 
DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA 
One Panasonic Way, Secaucus, New Jersey 07094
PANASONIC SALES COMPANY, 
DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC.
Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park
Carolina, Puerto Rico 00985PANASONIC AUTO PRODUCTS 
LIMITED WARRANTYLIMITED WARRANTY COVERAGE
If your product does not work properly because of defects in materi-
als and workmanship.
Panasonic Consumer Electronics Company or Panasonic Sales
Company (collectively referred to as “the warrantor”) will, for the
length of the period indicated in the chart below, which starts with
the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, or (b) replace
it with a new or refurbished product. The decision to repair or
replace will be made by the warrantor.
During the “Labor” warranty period, there will be no charge for
labor. During the “Parts” warranty period, there will be no charge for
parts. You must carry in or mail in your product during the warranty
period. If non-rechargeable batteries are included, they are not war-
ranted. This warranty only applies to products purchased and serv-
iced in the United States or Puerto Rico. This warranty is extended
only to the original purchaser of a new product which was not sold
“as is”. A purchase receipt or other proof of the original purchase
date is required for warranty service.
CARRY-IN OR MAIL-IN SERVICE
For Carry-In or Mail-In Service in the United States, call 1-800-211-
PANA (7262) or visit
Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico, call Panasonic Sales Company (787)-
750-4300 or fax (787)-768-2910.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials and
workmanship, and DOES NOT COVER normal wear and tear or cos-
metic damage. The warranty ALSO DOES NOT COVER damages
which occurred during shipment, failures which are caused by prod-
ucts not supplied by the warrantor, failures which result from acci-
dent, misuse, abuse, neglect, mishandling, misapplication, alter-
ation, faulty installation, set-up adjustment, maladjustment of con-
sumer control, improper maintenance, improper antenna, inadequate
signal reception or pickup, power line surge, improper voltage sup-
ply, lightning, modification, commercial use (such as use in hotels,
offices, restaurants, or other business uses) or rental use of the
product, or service by anyone other than the technician from Factory
Servicenter or other authorized service centers, or damage that is
attributable to acts of God. 
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS
NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT,  OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY.(As examples, this excludes
damages for lost time, cost of having someone remove or re-install
an installed unit if applicable, travel to and from the sevicer, and loss
of media, data or other memory contents. The items listed are not
exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIEDWARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILI-
TY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied war-
ranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this
product develops during or after the warranty period, you may con-
tact your dealer or Servicenter. If the problem is not handled to your
satisfaction, then write to warrantor’s Consumer Affairs Department
at the addresses of the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
Customer’s Record
Model
No.
SerialNo.
Dealer’sNo.
CodeNo.
Dealer’sAddress
Date of PurchaseCANADAPanasonic Canada Inc.
5770 Ambler Drive, Mississauga Ontario L4W 2T3PANASONIC PRODUCT LIMITED WARRANTYPanasonic Canada Inc. warrants this product to be free from defects
in materials and workmanship and agrees to remedy any such defect
for a period as stated below from the date of original purchase.
CAR AUDIO PRODUCT – ONE (1) YEAR, PARTS AND LABOUR
(The labour to install or remove the product is not warranted)
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada
or to any product which has been improperly installed, subjected to
usage for which the product was not designed, misused or abused,
damaged during shipping, or which has been altered or repaired in
any way that affects the reliability or detracts from the performance,
nor does it cover any product which is used commercially. Dry cell
batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A
purchase receipt or other proof of the original purchase date is
required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, or the exclusion of
implied warranties, so the above limitations and exclusions may not
be applicable.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably
in the original carton.
Include details of the defect claimed, and proof of the date of original
purchase.
Categories Parts Labor
Audio Components (except items listed
below)One (1) Year One (1) Year
MXESeries Audio Components (except
items listed below)Two (2) Years Two (2) Years
Speakers One (1) Year Not Applicable
Accessories (in exchange for defective
items)Ninety (90) Days Not Applicable
Limited Warranty
Before Reading These Instructions
Customer Services Directory
U.S.A.Obtain Product Information and Operating Assistance;
locate your nearest Dealer or Servicenter; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
http://www.panasonic.com/support
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7
pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-
833-8855Accessory Purchases:Purchase Parts, Accessories and Instruction Books
online for all Panasonic Products by visiting our Web
Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American
Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-
605-1277Service in Puerto RicoMatsushita Electric of Puerto Rico, Inc. 
Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial
Park,
Carolina, Puerto Rico 00985
Phone (787) 750-4300, Fax (787) 768-2910
CANADAWARRANTY SERVICEFor product operation and information assistance,
please contact your Dealer or our Customer Care Centre
at:
Telephone #: (905) 624-5505 Fax #: (905) 238-2360
Web: www.panasonic.ca
For product repairs, please contact one of the following:

KYour Dealer who will inform you of an authorized
Servicentre nearest you.

KOur Customer Care Centre at (905) 624-5505 or
www.panasonic.ca

KA Panasonic Factory Servicentre listed below:
Lachine, Quebec
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020 Mississauga, Ontario
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418Calgary, Alberta
Panasonic Canada Inc.
6835-8
thSt. N. E. Calgary,
AB T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493 Richmond, British
Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627 
						

							CQ-C8401U/C8301U/C7401U/C7301U
8
Sub-Woofer
(Option)
CQ-C8401U/C8301U
CQ-C7401U/C7301U
Head unit
Stereo/Mono
Power Amplifier (Option)
XM Receiver
XMD1000: manufactured by XM
Satellite Radio
(Option)
Delightful sound space thanks to system buildupFeaturesCQ-C8401U/C8301U/C7401U/C7301UWMA MP3 CD Player/Receiver with Full Dot Matrix Display Fully Motorized Front PanelA touch is all it takes to slide the front panel down for access to
the disc slot. A three-stage tilt function permits viewing angle
to be adjusted to 15, 25 or 35 degrees for optimum display
visibility.Sound ControlSQ (Sound Quality)You have six preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,
CLUB). You can customize your settings for these (except
FLAT) and save them for instant recall.
SQ7 (7-Band Sound Quality)
The level is adjustable in each of seven bands. This lets you
fine tune sound quality for each genre to suit car-interior
acoustics and your personal preferences.
Full lineup of optional partsAn optional XM tuner allows you to receive the XM radio
service. A DVD changer instead of an XM tuner is also
connectable.
¡Toll free number
XM Tuner   P/N: XMD1000
Call 1-800-XM-RADIO(96-72346)
Extension cord   P/N: XMDPAN100
Call 1-800-942-TERK(8375)
The XM name and related logos are trademarks of XM Satellite
Radio Inc.
Notes:
¡A changer and an XM receiver are not connectable at the
same time.
¡To connect the XM receiver (
XMD1000
), it is required to use
an optional extension cord (
XMDPAN100
) that is produced by
XM exclusively for Panasonic products.
CustomizeInitially stored moving images and still images are editable to
taste. IMAGE STUDIO* allows you to process images from a
digital camera or other devices without difficulty. ( apage 37)
*This software is downloadable from Panasonic Web site(http://panasonic.co.jp/pas/en/software/customize/index.html
)
.
CQ-C8401U/C8301U/C7401U/C7301U
9
Contents
¡
Safety Information 2
¡
Before Reading These Instruction 4
¡
Features 8
¡
Controls Layout 10
¡
Preparation 12
¡
General 14
¡
Radio 20
¡
CD Player 22
¡
MP3/WMA Player 24
¡
XM Tuner 28
¡
Disc Changer 30
¡
Audio Setting 34
¡
Function Setting 35
¡
Display Setting 36
¡
Customize the Display 37
¡
Troubleshooting 39
¡
Error Display Messages 42
¡
Notes on Discs 44
¡
Maintenance 44
¡
Specifications 45 English
Français46Español90
Common Each Source As Needed
DVD Changer
CX-DH801U
(Option)
Headrest Monitor: CY-V7100U (Option)
*You can connect only one of a changer, an XM receiver
and other commercially available portable audio
equipment. 
						

							CQ-C8401U/C8301U/C7401U/C7301U
English
y/5
Pause/Play
BAND
SET
APM 
Auto Preset
Memory
BAND BANDBANDBAND
BAND
11 10
Controls LayoutNote: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
CQ-C8401U/C8301U/C7401U/C7301U
SRC
CQ-C8401U
One-touch operation is available for selecting a track
playing style by use of [4] (RANDOM), [5] (SCAN), or
[6] (REPEAT). (For a Folder/Disc playing style, hold
down the same button for 2 sec. or more.)Direct AccessA channel (XM mode), a track (CD mode), a disc (Disc
changer), a file and a folder (MP3/WMA mode) can be
directly selected. 
Example: Track number 51
Press [#] (NUMBER).
2
Press [5].
3
Press [BAND] (SET). 
SRC Source
PWRPowerSQ Sound QualityMENU
DIM Dimmer VOLUME
PUSH SELSelect
DISP
Display
TUNE
TRACK (FILE)
ReleaseTILT
OPEN (eject)
SRC
Controls Layout
Main Unit
Remote Control Unit Functions Only by Remote Control Unit
Disc slot
P·SET
Preset
DISC (FOLDER
)
MUTE
SBC·SW Super Bass
Control·Subwoofer
D·M Direct Memory
When Face Plate
Opens
SELSEL
SRCSRCBANDBAND
MUTEMUTE23 1
5
8
06 4
9 7
#
VOLVOLDISP
CAR AUDIOMENU
SEL POWER
SOURCE
SRC
SET
BAND MUTE23 1
5
8
06 4
9 7
#
VOL
RANDOM
NUMBER TUNE TUNESCAN REPEAT
DISP
POWER
SOURCE
SRCPOWER
SRC (SOURCE)
MUTE
SBC·SW Super Bass
Control·Subwoofer BAND
Pause/Play
SET
APM 
Auto Preset
Memory
SELSelect
MENUVOLVolume
}:Up
{:Down
DISPDisplay
04RANDOM5SCAN6REPEA
T7
9
#NUMBE
R
Number Buttons
–Number
RANDOM
SCAN
REPEAT9
TUNE
TRACK(FILE)
P·SET
(Preset)
DISC (FOLDER)
VOLDISP
SET
BAND
MENU
SEL
8
0
MUTE 
						

							CQ-C8401U/C8301U/C7401U/C7301U
English13 12
Preparation
CQ-C8401U/C8301U/C7401U/C7301U
Note: Adjust the clock when “ADJUST” appears on the
display.1
Press [MENU]to display the menu
display.For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
2
Press []]or [[]to display the
DISPLAY menu.
3
Press [
{
]to select “CLOCK ADJ”.
4
Press [BAND] (SET) to confirm the
display.
5
Adjust the setting value.
[[]
:Adjusting minutes
[]]
: Adjusting hours
[}
]: Forward
[{
]: Backward
6
Press [BAND] (SET) to confirm the
adjustment.
7
Press [MENU].For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
The demonstration message appears for first use.1
Set your cars ignition switch to the ACC
or On position.The demonstration screen appears.
2
Press [DISP](Display).The demonstration screen is cancelled, and no more
appears.
3
Press [SRC](PWR: Power).
Note:If you would like to turn on the power and make
the demonstration message appear, hold down [SRC]
(PWR: Power)for 4 sec. or more after turning off the
power in other than the XM mode.
You may need to set the following depending on the
devices to be connected.Using Subwoofer¡Subwoofer level adjustment (apage 34)
¡Subwoofer low pass filter (apage 34)Connecting XM tuner¡Connect the optional XM receiver (
XMD1000
).
¡To connect the XM receiver (
XMD1000
), it is required
to use an optional extension cord (
XMDPAN100
) that is
produced by XM exclusively for Panasonic products.
Getting Started
It is required to sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID,
sign up on the XM’s website or by calling them.
1
Check of XM Satellite Radio ID
¡Write down the ID indicated on the lower right of your
XM receiver (XMD1000).
¡Radio ID also can be found by turning your XM Radio
to channel 0. (apage 28.)2
Activate the XM Satellite RadioSelect either of the below to sign up.
¡Web site: http://www.xmradio.com/activation
¡Phone number: 1-800-XM-RADIO (1-800-967-2436)
Note: Refer to the operating instructions for the XM
receiver for details. The following functions are activated when the Security
Function is ON. (a page 35)
¡The security indicator lights up when removing the
face plate.¡The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off.
Security Indicator
SRC
CQ-C8401U
Preparation
First Time Power On
(DEMONSTRATION)
Remote Control Preparation
Security Function
SettingOther Settings Clock adjustment
WarningKeep batteries and insulation film out of reach of
infants. If an infant ingests a battery, please seek
immediate medical attention.Cautions
¡Remove and dispose of an old battery immediately.
¡Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡Follow local regulations when disposing of a battery.
¡Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal use
(at room temperature)
Preparation Before Initial UsePull the insulation film out
from the backside of
remote control gently.Battery Replacement
qw
qRemove the battery holder
with the remote control unit
placed on a flat surface.
qStick your thumbnail into
the groove, and push the
holder in the direction of
the arrow, and at the
same time.
wPull it out in the direction
of the arrow using a
tough pointed object.
2
3
wPut a battery in the case
with (+) side facing up.
ePut the case back.Tough pointed object
Back side
Insulation film 
						

							CQ-C8401U/C8301U/C7401U/C7301U
English
Power onPress [SRC](PWR:Power).Note:The opening screen appears. You can overwrite
opening screen (moving image) with new one. (apage
37)Power offHold down [SRC](PWR)until you hear a
beep, then release it.Note:The ending screen appears. You can change the
ending screen (moving image). (apage 37)
14
GeneralThis chapter explains how to turn on or off the power, how to adjust the volume, etc.
CQ-C8401U/C8301U/C7401U/C7301U
15
You can remove the face
plate to prevent it from
being stolen.Removing1
Turn off the power 
(apage 14)
2
Press []
(Release).(The face plate disen-
gages with a click
when it is removed.)
The face plate automatically closes after a lapse of 5
seconds while it is open.
The power is automatically turned off while the unit
is active.
3
Put the face
plate in the case.
Mounting1
Slide the left side of the face plate in
place.
2
Press the right end of the face plate
until “click” is heard.
Cautions:
¡It is recommended to remove or mount the face
plate when the plate is at the closed position.
Do not remove or mount the face plate when the
plate is in motion.
¡This face plate is not waterproof. Do not expose it to
water or excessive moisture.
¡Do not remove the face plate while driving your car.¡Do not place the face plate on the dashboard or
nearby areas where the temperature rises to high
levels.
¡Do not touch the contacts on the face plate or on the
main unit, since this may result in poor electrical
contacts.
¡If dirt or other foreign substances get on the con-
tacts, wipe them off with clean and dry cloth.
¡To avoid damaging the face plate, do not push it
down or place objects on it while it is open.
Open/EjectPress [] (OPEN).When a disc is already loaded, the disc will automatically
be ejected.ClosePress [] (OPEN).
TiltThe display angle changes among 4 levels as follows
every time you hold down [] (TILT)for 1 sec. or
more and release. Note:The last selected
angle is memorized even
after turning off the power.
Notes:
¡The volume level can be set independently for each
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
¡The volume is not adjustable while an error display is
on the monitor. (apage 42)
qUp
wDown
Setting Range: 0 to 40
Default: 18Volume off (down)Press [] (MUTE).CancelPress [] (MUTE)again.Note: 
Volume-down range can be specified. (
apage
35)
SRC
CQ-C8401U
SRC
CQ-C8401U
SRC
CQ-C8401U
SRC
CQ-C8401U
General
Power On/off
(PWR: Power)
Face Plate Motion (Open/Close, Tilt)
(OPEN/CLOSE, TILT)
Volume Adjustment
(VOLUME)
Temporary Volume Off (Down)
MUTE (ATT: Attenuation)
Cautions:
¡To avoid damaging the face plate, do not push it
down or place objects on it while it is open.
¡Do not pinch your finger or hand in the face plate.
¡Do not insert foreign objects into the disc slots.
¡For the following cases, the face plate automatical-
ly closes. Use caution not to catch your finger.
¡After a lapse of 20 seconds
¡When a disc is inserted
¡When the face plate is removed (apage 14)
TILT 1
TILT 2
TILT 3
OPENTILT OFF
Face Plate Removing/Mounting
(Anti-Theft System) 
						

							CQ-C8401U/C8301U/C7401U/C7301U
GeneralEnglish
16
General
CQ-C8401U/C8301U/C7401U/C7301U
17
Substitutional Subwoofer 
(SBC-SW: Super Bass Control·Subwoofer)
The rear speaker can be used as a substitutional
subwoofer when a subwoofer is not connected.Holding down [] (SBC·SW)for 2 sec. or
more toggles SBC-SW on and off.RadioFM1, FM2, FM3, AM (apage 20)
Source Selection
(SOURCE)
The source changes as follows every time 
[SRC]
(Source) is pressed.
SRC
CQ-C8401U
SRC
PlayerWhen loading CD (apage 22)
When loading MP3/WMA disc (apage 24)Auxiliary (AUX1)Only for CQ-C8401U/C8301UWhen connecting a device that is not controlled by this
unit
Auxiliary (AUX or AUX 2)When connecting CD Changer, DVD Changer
(apage 30, 32)
When connecting XM Tuner (apage 28)
When connecting a device that is not
controlled by this unit.
CQ-C8401U/C8301U
CQ-C7401U/C7301U
Note:Please connect a CD changer or a DVD changer
to CH/AUX2 (CQ-C8401U/C8301U), CH/AUX (CQ-
C7401U/C7301U). (aInstallation Instructions)
SRC
CQ-C8401U
Lights when activated.
Off (default)
OnNote:If ON is selected, the settings of subwoofer level
adjustment and subwoofer low pass filter are activated.
(apage 34)
The display changes as follows every time [DISP]is
pressed.
Note:The graphic pattern and still image are selectable. (a
page 36)
At power-off:Clock display (Default)
The dimmer level changes as follows every time you hold
down [MENU] (DIM:Dimmer)for 2 sec. or more.
Brighter (Default)
Medium Mode
Folder hierarchy (for CQ-C8401U/C8301U, MP3/WMA
mode only.)
Ordinary display + graphic pattern
Ordinary display + still imageOrdinary display + clock
Display OFF
All displays disappear in 5 seconds.
SRC
CQ-C8401U
At power-on:
SRC
CQ-C8401U
DarkerOff Only graphic pattern
Only still image
Display Change
(DISP: Display)
Dimmer Control
(DIM: Dimmer)
Note:This setting is not adjustable with the remote
control.
Note:The graphic equalizer of 19 bands is
selectable when selecting a still image. 
						

							CQ-C8401U/C8301U/C7401U/C7301U
19EnglishGeneral
18
General
CQ-C8401U/C8301U/C7401U/C7301UThe sound type each of which is adjusted with 7 bands
changes every time you press [SQ].
1. FLAT
(default)
2. ROCK
3. POP
Lights when activated.
SQ Selection Based on Genre
(SQ: Sound Quality)
4. VOCAL 5. JAZZ6. CLUB
Notes:
¡Setting of SQ, bass/treble and volume are influenced
one another. If the influence mentioned above causes
distortion to the audio signal, readjust bass/treble or
volume.
¡Each SQ (except FLAT) level is changeable. (apage
19)You can make fine adjustments to the currently selected
SQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB in
accordance with your car type or taste. 
1
Hold down [SQ](Sound Quality) for 2
sec. or more.The targeted SQ preset appears.
2
Adjust each frequency.Note:If you press [DISP], the presetting is can-
celed. The presetting is active until another SQ pre-
set is called up.[[]:Higher frequency
[]]:Lower frequency
q :Level Up
w :Level Down
3
Hold down 
[}]
or 
[{]
for 2 sec. or
more to confirm your adjustment.
Note:You can select a SQ preset to be targeted
with [}]and [{](and [2]-[6]on the remote con-
trol).
4
Hold down 
[}]
or 
[{]
for 2 sec. or
more to confirm your adjustment.
The existing adjustment is overwritten with new
adjustment. 
Notes:
¡FLAT is not changeable.
¡If no operation takes place for more than 10 sec-
onds, the display returns to the regular mode.
¡This adjustment is executable in the AUDIO menu
as well. (apage 34)
¡If you hold down [BAND]for 2 sec. or more on
the SQ call-up screen, the presetting that is called
up can be turned into the default.
SRC
CQ-C8401U
SRC
CQ-C8401U
Change of SQ Presetting