Panasonic Wide Plasma Display Th 42pw4 Operating Instructions
Here you can view all the pages of manual Panasonic Wide Plasma Display Th 42pw4 Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
31 SIDE BAR ADJUST side barsl 2Press to select the SIDE BAR ADJUST. Press to select DARK, MID, BRIGHT. OFF DARK MID BRIGHT R SCREENSAVER FUNCTION MODEWHITE BAR SCROLLONSIDE BAR ADJUSTMID Press to exit from SCREENSAVER.3 1 4:3 Screen Display after-images Do not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on the side bars either side of the display field. To prevent the appearance of such an after-image, illuminate the side bars. To display the...
Page 32
32 SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y, P B, PR signals “COMPONENT” R, G, B, HD, VD signals “RGB” SURROUND VOL N SOUND INPUT ASPECT PICTURE POS. /SIZE R PICTURESET UP SET UP1 2 Press to display the SET UP menu screen. Press to select the “COMPONENT/RGB IN SELECT”. Press to select the desired mode. COMPONENT RGB R Press to exit from adjust mode. 3D Y/C FILTER – For NTSC...
Page 33
![Page 33
33
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Mode
Color system
Pansonic AUTO
(4:3)Press to select each functions.
Function
Set the color system to match the input signal. If set to “AUTO”, the color system
is determined automatically.
Set to “NORMAL” to view 4:3 images in an unchanged format when
Panasonic AUTO is...](http://img.usermanuals.tech/thumb/58/71520/w300_th-42pw4_en_om_d-32.png "Page 33
33
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Mode
Color system
Pansonic AUTO
(4:3)Press to select each functions.
Function
Set the color system to match the input signal. If set to “AUTO”, the color system
is determined automatically.
Set to “NORMAL” to view 4:3 images in an unchanged format when
Panasonic AUTO is...")
33 SET UP for Input Signals COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Mode Color system Pansonic AUTO (4:3)Press to select each functions. Function Set the color system to match the input signal. If set to “AUTO”, the color system is determined automatically. Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is...
Page 34
![Page 34
34
Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.
Press to select each item.
Press to adjust.
SIGNAL[
PC ]
SYNC
PULL-IN RANGE
HFREQ kH
H & V
NARROW
31 5
CLAMP POSITION
The following operation methods are the same for both the SIGNAL [RGB]
and SIGNAL [PC].
SYNC
SYNCH & V
SYNCON VIDEO
SYNCON G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H&V:The H and V sync signals are input from the HD/VD connector.
ON G:...](http://img.usermanuals.tech/thumb/58/71520/w300_th-42pw4_en_om_d-33.png "Page 34
34
Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.
Press to select each item.
Press to adjust.
SIGNAL[
PC ]
SYNC
PULL-IN RANGE
HFREQ kH
H & V
NARROW
31 5
CLAMP POSITION
The following operation methods are the same for both the SIGNAL [RGB]
and SIGNAL [PC].
SYNC
SYNCH & V
SYNCON VIDEO
SYNCON G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H&V:The H and V sync signals are input from the HD/VD connector.
ON G:...")
34 Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode. Press to select each item. Press to adjust. SIGNAL[ PC ] SYNC PULL-IN RANGE HFREQ kH H & V NARROW 31 5 CLAMP POSITION The following operation methods are the same for both the SIGNAL [RGB] and SIGNAL [PC]. SYNC SYNCH & V SYNCON VIDEO SYNCON G Setting RGB sync signal Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). H&V:The H and V sync signals are input from the HD/VD connector. ON G:...
Page 35
35 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Some parts of the screen do not light up After-images appear Whirring sounds can be heard from the display unit. Plasma Display panel Check The plasma display panel is manufactured using an extremely high level of precision technology, however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a malfunction. Do not allow a still...
Page 36
36
Page 37
37
Page 38
![Page 38
38
Specifications
TH-42PW4
120 V AC, 50/60 Hz
395W
1.2 W
0.9 W
Drive method AC type
42-inch, 16:9 aspect ratio
3000:1
(Panel only) 780 cd / m
2
(As a set) 400 cd / m2
920 mm (W) × 518 mm (H) × 1056 mm (diagonal)
No. of pixels
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
34 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
NTSC, PAL, PAL60, SECAM, Modified NTSC
525i (480i), 625i (575i), 525p (480p), 625p (575p), 750p (720p), 1125/ 60i, 50i, 24p,
24SF (1080/60i, 50i, 24p, 24SF) ············· SMPTE 274M
VGA display...](http://img.usermanuals.tech/thumb/58/71520/w300_th-42pw4_en_om_d-37.png "Page 38
38
Specifications
TH-42PW4
120 V AC, 50/60 Hz
395W
1.2 W
0.9 W
Drive method AC type
42-inch, 16:9 aspect ratio
3000:1
(Panel only) 780 cd / m
2
(As a set) 400 cd / m2
920 mm (W) × 518 mm (H) × 1056 mm (diagonal)
No. of pixels
408,960 (852 (W) × 480 (H)) [2,556 × 480 dots]
34 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
NTSC, PAL, PAL60, SECAM, Modified NTSC
525i (480i), 625i (575i), 525p (480p), 625p (575p), 750p (720p), 1125/ 60i, 50i, 24p,
24SF (1080/60i, 50i, 24p, 24SF) ············· SMPTE 274M
VGA display...")
38 Specifications TH-42PW4 120 V AC, 50/60 Hz 395W 1.2 W 0.9 W Drive method AC type 42-inch, 16:9 aspect ratio 3000:1 (Panel only) 780 cd / m 2 (As a set) 400 cd / m2 920 mm (W) × 518 mm (H) × 1056 mm (diagonal) No. of pixels 408,960 (852 (W) × 480 (H)) [2,556 × 480 dots] 34 °F - 104 °F (0 °C - 40 °C) 20 % - 80 % NTSC, PAL, PAL60, SECAM, Modified NTSC 525i (480i), 625i (575i), 525p (480p), 625p (575p), 750p (720p), 1125/ 60i, 50i, 24p, 24SF (1080/60i, 50i, 24p, 24SF) ············· SMPTE 274M VGA display...
Page 39
39 Accessories Supplied Remote Control Transmitter Batteries Ferrite core Fixing bands Optional Supplied Speakers Pedestal Wall stand Wall-hanging bracket(angled) TunerTerminal Board Connecting cable Dimensions (W × D × H) Weight (Mass) TH-42PW4 EUR646525 2 × AA Size 2 × J0KF00000018 2 × TMME187 TY-SP42PWD3W TY-ST42PT3-K TY-ST42PW1 TY-WK42PR1 TY-42TM4H TY-SCP15C03 40.2” (1020 mm) × 24” (610 mm) × 3.5” (89 mm) approx. 65.0 lbs (main unit only) approx. 74.3 lbs (with speakers) Specifications Note: Design...
Page 40
Printed in Japan MBS0601SO(MS) Customer’ Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus New Jersey...