Panasonic Tc 50cx400 Quick Start Guide

							/FUXPSL
DPOOFDUJPO4USFBNJOH
TFSWJDFTEEJUJPOBM
4VQQPSU

- Press INFO button on remote to conrm type of signal being received. HD signal should be 720p, 1080i or 1080p.
- Select a High Denition channel from HD source (Cable, Satell ite, 
Fiber optic or antenna).
- HD channels sometimes broadcast non-HD content.
- Ensure that HD source (HD box, Blu-ray player, etc.) is conne cted to 
TV via either HDMI or Component cable and set to output HD vide o signal.
Why does my picture 
quality not look like it is 
in High Denition?
- If connection fails, contact your Internet service provider or router/modem manufacturer to check for rewall, content lter or 
proxy settings that may block TV from accessing the Internet.
Why did the network 
connection fail? 
- If your Home Theater has an HDMI-ARC Out, then connect it to  the 
TVs HDMI 2 (ARC) input using an HDMI cable.
- If HDMI-ARC is not available, then connect the TV’s DIGITAL A UDIO 
OUT to the Home Theater using an optical cable or connect to th e 
headphone jack.
How can I hear the 
TVs sound through 
my Home Theater?
Why is the screen 
displaying a blue, 
black or snowy picture 
or no picture at all? - Ensure power cord is plugged in and TV is on   
(front LED should be red).
- Press INPUT SOURCE button on TV remote to select correct 
   input source.
- Check that all connections are correct and secure.
- When using external video source, such as Cable/Satellite box  or DVD 
player, check that device is working.
Wired LAN (Ethernet)
For minimal network 
interference, wire the TV 
to your router using 
an Ethernet cable.
Built-in Wireless LAN 
To connect the TV to your wireless 
router, you will need :
 - Your wireless network name
 - Your wireless network password  (if required)
Establish a connection
Select network connection type
/FU
XPSLBuilt-in Manual
Visit Panasonic.com/Support
• Select your wireless network name (SSID)
The network name and 
password may be printed on the 
Router’s label. Encryption key 
(password) is CASE sensitive. Wireless connection 
with a password
Check out Panasonic accessories and other great products at: Get exclusive access to Panasonic owner privileges
Register your new TV at
Panasonic.com/Register
Shop.Panasonic.com
Printed in China
HOME
HOME
First time setup3
Turn the TV on, then follow the on-screen steps. 
1
2
HOME
Watch TV via HD box 4
HD box
1
3
CH
TV
2
HOME
Pedestals assembly1
BC
A
A
B
C
A
Be sure to attach the pedestals in the following way .
1. Lay the TV face down on a at, cushioned surface to avoid da maging 
or scratching. 
2. Attach the pedestals           to the TV with four assembly  screws      
provided. 
BCA
Connect TV to HD box2
)%.*
Good
Best
Basic
Other device 
Use an HDMI cable for best HD picture.
Note: 1st red is for audio; 2nd red is for video.
(Cable, Satellite, 
Fiber optic, etc)
HD box
HDMI port #1 is recommended HDMI
)%.*
AV IN
Note: Connect yellow wire to green.
-
7*% &0:

AV INOther device 
03
03
$PNQPOFOU
7JEFP
(Not HD)
3 1C 1S
-
7*% &0:

3 1C 1S
INPUT SOURCE
HDMI 1
NETFLIX YOUTUBE VUDUTOONGOGGLES PANDORAACCUWEATHER
STREAMING
HDMI 1
NETFLIX YOUTUBE VUDUTOONGOGGLES PANDORAACCUWEATHER
Use the Up and Down arrows on your
remote control or TV keypad to select
your local time zone.
:Select OK:Next 
Time Zone
Alaska
HawaiiPacic
Central
Eastern
AtlanticNewfoundland
Mountain                                                                       
ANTENNA/CBL 
PC 
USB 
HDMI2(ARC) 
HDMI 3 
COMPONENT 
AV  
ANT/CBL 
SOUND 
PICTURE 
CONTROL               
STREAMING 
SETUP 
MEDIA 
SUPPORT  
PARENTAL
  
SYSTEM 
NETWORK  
eHELP  
PHOTOS 
MUSIC  
 VIDEO       
ANTENNA/CBL 
PC 
USB 
HDMI2(ARC) 
HDMI 3 
COMPONENT 
AV  
ANT/CBL 
SOUND 
PICTURE 
CONTROL 
PHOTOS 
MUSIC               
INPUT SOURCE 
SETUP 
MEDIA 
SUPPORT 
PARENTAL
  
SYSTEM 
NETWORK  
eHELP  
 VIDEO