Panasonic Sc Btt270 Owners Manual

Getting started 
11
VQT3D27
[BTT370] [BTT273]
1Use of the speaker cable stickers is 
convenient when making cable connections.
e.g. Front speaker (L)
A Speaker cable sticker  (supplied)
B Connector
Be sure to match the number on each sticker with the 
connector color.
2Connecting the speaker cables. Insert the 
wire fully, taking care not to insert beyond 
the wire insulation.
≥ [BTT770]  Be sure to use the speaker cables that have a 
large connector and short  cable when you use the 
wireless system....

12
VQT3D27
STEP 2 : Positioning
How you set up your speakers can affect the bass and the sound field.
Setup example
Place the front, center and surround speakers at 
approximately the same distance from the seating position.
The angles in the diagram are approximate.
	≥Keep your speakers at least 10 mm (13/32z) away from the system for 
proper ventilation.
A Center speaker
≥Put on a rack or shelf not to interfere with the TVs various 
sensors (ambient light, etc.). Vibration caused by the speaker 
can...

Getting started 
13
VQT3D27
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owner’s manual.
Do not connect the AC power supply cord until all other connections are complete.
Connect to the terminals of the same color.
[BTT770]  
[BTT370] [BTT270]  [BTT273]
Speaker cable connection
Connection with the wireless system (SH-FX71)
Connection with the main unit
LS / RB LB / RSSPEAKERS
ENCEINTES
SURROUND (3 - 6    )   
AMBIOPHONIQUESSURRL
SIDE R
SIDE
SUBWOOFER365214333RLR...

14
VQT3D27
≥The basic connection is shown in the included Easy Setting Guide,  however, there are more connection examples to optimize 
your system setting.
	≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥After making the digital audio connection, make settings to suit the type of audio from your digital equipment. ( >25)
∫HDMI
The HDMI connection supports VIERA Link...

Getting started 
15
VQT3D27
≥When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled 
“HDMI (ARC)”, you can connect the unit simply with a single HDMI cable.
≥ It is possible to playback 3D videos and 3D still pict ures by connecting this unit with a 3D compatible TV.
≥ For details, refer to the operating instructions of your TV.
∫ When the HDMI terminal on the TV is labeled “HDMI (ARC)”
A HDMI cable 
[BTT770]  [BTT370]  [BTT270]  : not supplied...

16
VQT3D27
∫[BTT770] [BTT370] When the connecting devices have an HDMI terminal
AHDMI cable  (not supplied)
B Set Top Box (Cable/Satellite), etc.
C Other devices (Video game, etc.)
≥Make sure that the HDMI cable connection is made to enjoy 
the videos from the Set Top Box, etc. Futhermore, select 
“HDMI Input1” or “HDMI Input2” as a source.
HDMI Standby Pass-Through ( >39)
Even if this unit is in standby mode, a device connected with 
this unit can output videos and sound to the TV.
Moreover, you can...

Getting started 
17
VQT3D27
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated ( >22)
≥ You can enjoy BD-Live ( >26)
≥ You can enjoy VIERA CAST ( >34) For details about connection method, refer to the instructions 
supplied with the connected equipment.
[BTT770] Digital transmitter connection
Insert fully until you 
hear a click.
Do not insert or remove while the home 
theater unit is on.
Make sure that the digital transmitter is fully inserted.
If the...

18
VQT3D27
STEP 4: AC power supply cord connection
Connect only after all other connections are complete.
AAC power supply cord  (supplied)
B To a household AC outlet A
AC power supply cord  (supplied)
B To a household AC outlet
Main unit
This unit consumes a small amount of AC power, even when it is turned off. [BTT770]  [BTT370]  : approx. 0.05 W*,  [BTT270] [BTT273] : approx. 0.4 W* 
* When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using this unit for...

Getting started 
19
VQT3D27
STEP 6: Easy setup
The Easy setup assists you to make necessary 
settings.
Follow the on-screen prompts to make basic settings for the 
system.
Preparation
Turn on your TV and select the appropriate video input mode 
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this 
unit.
[BTT770] [BTT370]
≥ Confirm the digital transmitter connection. ( >17)
1Press [ Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 2 or...

20
VQT3D27
The configuration of your network is about to begin. If you 
failed to make the settings, refer to page 21
Select “Wired” and press [OK].
Follow the on-screen instructions to make your connection 
settings.
≥When you experience problems ( >21)
Preparation
≥Obtain your network name ( >21, SSID).
≥ If your wireless connection is encrypted please be sure 
that you know your encryption key.
1Select “Wireless” and press [OK].
2Select “Search for wireless network” or 
“WPS (PUSH button method)” and...