Panasonic Rp Bt10 Operating Instructions Manual

RQT8993
1011
RQT8993
Precautions
The unitThis unit uses the 2.4 GHz radio frequency 
band (Bluetooth). However other wireless 
equipment may use the same frequency. Be 
sure to take note of the following to prevent 
radio wave interference from other equipment.
Restriction of use
For use only in your country.
Range of use
The range of use is up to approximately 10 m 
(33 ft.). The range may be less depending on 
the structure of the building, the environment 
and any obstacles between the receiver and...

RQT8993
1213
RQT8993
Parts and their functions
TransmitterReceiver, microphone and earphones
 Connector:  Connect this to the iPod®’s dock connector. Lamp:  This indicates the status of the device.
(Refer to page 23.)
 Transmitter button:  This is operated when setting 
the pair.
  : PLAY/PAUSE  : Forward  : Backward   : Use this to increase the volume level.  :  Use this to reduce the volume level. Also use it 
to register the pair.
   Lamp:  This indicates the status of the device. 
(Refer to page...

RQT8993
1213
RQT8993
Parts and their functions
TransmitterReceiver, microphone and earphones
 Connector:  Connect this to the iPod®’s dock connector. Lamp:  This indicates the status of the device.
(Refer to page 23.)
 Transmitter button:  This is operated when setting 
the pair.
  : PLAY/PAUSE  : Forward  : Backward   : Use this to increase the volume level.  :  Use this to reduce the volume level. Also use it 
to register the pair.
   Lamp:  This indicates the status of the device. 
(Refer to page...

RQT8993
1415
RQT8993
Preparations (prior to use)
Concerning the connection of the stereo earphones (L, R)Insert the input plug of the stereo earphones into the AUDIO OUT connector for use.How to fit the stereo earphones into your ears properlyIf the earpieces are not fitted snugly into your ears, you may not obtain a good seal or hear bass sounds. Fit them 
into your ears snugly for a better sound quality listening experience.■
  Lift the upper part of your left ear lobe 
using your right hand (and vice...

RQT8993
1415
RQT8993
Preparations (prior to use)
Concerning the connection of the stereo earphones (L, R)Insert the input plug of the stereo earphones into the AUDIO OUT connector for use.How to fit the stereo earphones into your ears properlyIf the earpieces are not fitted snugly into your ears, you may not obtain a good seal or hear bass sounds. Fit them 
into your ears snugly for a better sound quality listening experience.■
  Lift the upper part of your left ear lobe 
using your right hand (and vice...

RQT8993
1617
RQT8993
Listening to music on your iPod®
Operating the receiverAs soon as the pairing has been set, the iPod® can be operated by remote control.
  Play/pause :  Each time this is pressed, the mode is 
switched.
  Next/Fast-forward :   Press this once to skip to the next track; 
Press and hold it down to fast-forward.
 
 Previous/Rewind :  Press this once to return to the beginning of 
the previous track; Press and hold it down to 
rewind.
  Volume (up) :  Use this to adjust the volume level...

RQT8993
1617
RQT8993
Listening to music on your iPod®
Operating the receiverAs soon as the pairing has been set, the iPod® can be operated by remote control.
  Play/pause :  Each time this is pressed, the mode is 
switched.
  Next/Fast-forward :   Press this once to skip to the next track; 
Press and hold it down to fast-forward.
 
 Previous/Rewind :  Press this once to return to the beginning of 
the previous track; Press and hold it down to 
rewind.
  Volume (up) :  Use this to adjust the volume level...

RQT8993
1819
RQT8993
Talking on your cellphone
Registering the device pairIn order to establish the wireless connection between the receiver and Bluetooth cellphone, the receiver and 
cellphone pair must be registered.
•  Operations involving the receiver
 Press and hold the MIC button on the receiver for 2 seconds.  The receiver’s power is turned on, and its lamp (red) starts blinking slowly. Press and hold the [–] button on the receiver for 6 seconds.  The lamp (red) starts blinking rapidly.Caution:...

RQT8993
1819
RQT8993
Talking on your cellphone
Registering the device pairIn order to establish the wireless connection between the receiver and Bluetooth cellphone, the receiver and 
cellphone pair must be registered.
•  Operations involving the receiver
 Press and hold the MIC button on the receiver for 2 seconds.  The receiver’s power is turned on, and its lamp (red) starts blinking slowly. Press and hold the [–] button on the receiver for 6 seconds.  The lamp (red) starts blinking rapidly.Caution:...

RQT8993
2021
RQT8993
Talking on your cellphone
Talking on the phoneReceiving incoming calls  You will hear the incoming call tone when someone calls 
the number of your cellphone.
-  To talk to the other party, Press the MIC button on the 
receiver.
-  To switch the call to your cellphone, Press and hold the 
MIC button on the receiver for 2 seconds after the 
call has been connected.
-  To refuse the call, Press and hold the MIC button on the receiver for 2 seconds during the call tone.
Hanging up Press...