Home
>
Panasonic
>
Camera Accessories
>
Panasonic Remote Operation Panel Ak Hrp931p Operating Instructions
Panasonic Remote Operation Panel Ak Hrp931p Operating Instructions
Here you can view all the pages of manual Panasonic Remote Operation Panel Ak Hrp931p Operating Instructions . The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.
Page 11
11 Parts and their functions +CLP: Detail edge overshoot clip This is used to limit the length of the overshoot parts of the detail edge components. –CLP: Detail edge undershoot clip This is used to limit the length of the undershoot parts of the detail edge components. KNEE: Detail edge knee This function applies the knee to the detail edge parts. CRM: Chroma detail This function boosts the detail in the high chroma saturation. CRSP: Chroma detail crisp This is used to remove the very faint noise...
Page 12
12 Parts and their functions SCCO (SDTV): Subcarrier phase coarse adjustment This is used to coarsely adjust the phase of the subcarrier signal in relation to the SDTV genlock sync signal. SCFIN (SDTV): Subcarrier phase fine adjustment This is used to finely adjust the phase of the subcarrier signal in relation to the SDTV genlock sync signal. SH_H: SD/HD horizontal phase This is used to adjust the horizontal phase of the SDTV output and HDTV output. SH_V: SD/HD vertical phase This is used to set the...
Page 13
13 Parts and their functions LCD display This shows the adjustment items and adjustment values when the control item selector switches ?have been selected. @ Adjustment rotary encoders These enable the data of the adjustment items shown on the LCD display @to be changed. A FILTER SCENE FILEMONITOR GAIN SHUTTER ND HEADCAP 100 25 6.3 1.6 1234 R -6 ON VAR FULL AUTO -3 0 3 6 9 12 G B SEQ ENC STORE GAIN G CC4.3 6.3 3.2 DFO DTL RB BLACK GBR B DC E F G H LJK 5678 BFILTERND HEAD CAP 100 25 6.3 1.6 CC 3.2 4.3 6.3...
Page 14
14 Parts and their functions Calling scene file data 1.From among the 1 to 8 scene file switches, press the number of the switch that corresponds to the scene file which is to be called and light its lamp. 2.The scene file is now read. The data read from the scene file is input into the current file and then output. 3.When the scene file is read, the data left in the current file until that moment is temporarily saved. The lamp of the scene file switch remains lighted even after the data has been...
Page 15
15 Parts and their functions R, G, B black controls [R, G, B FLARE] Whether these controls are to be used to adjust the flare or pedestal can be set on the menu. They are used for the red (R), green (G) and blue (B) black adjustments. When the auto black balance can be performed and the R, G or B black control is turned, the flare or pedestal control value on the LCD display changes. H DTL control [DTL] This is used to increment or decrement (paint) the detail control settings (H-DTL and V-DTL...
Page 16
16 ROP connector panel RCP CCUPREVIEW XYZ RCP connector The remote control panel (RCP) is connected here. Y CCU connector The camera control unit (CCU) is connected here. X Preview control connector [PREVIEW] This is the output connector which is used for previewing. When the joystick is pushed in, the contact information is output. Z Connections Reference files Connections of the system components 1.Connect this panel by connecting its CCU connector to the ROP connector on the rear panel of the CCU...
Page 17
RCP CCUPREVIEW ROP ONCLOSE 5600K OFFFLAREGAMMA ONBLKOFFGAMMAKNEE ONAUTOOFFKNEECLIP OFFWHITE CLIPWHITEONMATRIX MATRIXOFFHD. DTL HD. DTLOFFSD. DTL SD. DTL BLACKWHITERSHADINGGBKNEEGAMMABLKUNDOPEDFLAMEGAMMAGAINSYSTEM FUNC BAR TESTCHARACTERRSTOPT FAN 60HzCABLEWHITESET UPBLACKHEAD ON VFPWSD CARDCAMERA NO. ALARM AU TO MODE FILTERSCENE FILEMONITORGAIN SHUTTER CONTROL ND HEADCAP 100 25 6.3 1.61234512345 R -6 ON VAR FULL AUTO -3 0 3 6 9 12 G B SEQ ENC STOREGAIN G CC1.1 4.3 6.3 8.0 DTL RB BLACK IRIS IRIS...
Page 18
F1002T @ Printed in Japan VQT0A41 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los...