Panasonic Projector Pt D12000 Operating Instructions
Have a look at the manual Panasonic Projector Pt D12000 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PT-D12000/PT-DZ12000 Operating Instructions Additions and Corrections to the Operating Instructions Installation in a downward vertical position Ù When installing the projector in a downward vertical position, please ensure to attach the supplied fi ttings to all lamp units. Without the fi ttings, the lamp life may be shortened. When installing the projector other than in a downward vertical position, remove the fi ttings. Range of the downward vertical position 1. Downward vertical position range: 45° forward and backward from the position perpendicular to the ceiling. 45°45° How to attach the fi tting to the lamp unit 2. A Remove the lamp unit from the projector, following the “Procedure of lamp unit replacement” (Page 115) of the Operating Instructions. B Insert the fi tting into the gap between the plastic holder and the wire mesh as shown in the fi gure below. ∗ Leave no gap between the fi tting and the wire mesh. Insert fi tting between plastic holder and wire mesh. Plastic holder Fitting C Install the lamp unit into the projector, following the “Procedure of lamp unit replacement” (Page 115) of the Operating Instructions. Changes in the table in page 21 of the Operating Instructions Ù ¶5 1.6 3.2 0.8 ¶5 1.2 2.4 0.6 ¶10 0.8 1.6 0.4 ¶15 0.6 1.0 0.3 ¶5 3.0 6.0 1.5 3.0 ¶5 2.4 4.8 1.2 2.4 ¶15 0.4 0.8 0.2 D12000 DZ12000 ET-D75LE1¶40¶15¶5 ET-D75LE2¶40¶15¶5 ET-D75LE3¶40¶15¶10 ET-D75LE4¶40¶15¶10 ET-D75LE5¶22¶15¶5 ET-D75LE6¶28¶10¶5 ET-D75LE8¶40¶15¶101.6 1.2 0.8 0.5 0.44.3 2.6 Lens Keystone correction onlyWhen using arc and keystone correction togetherArc correction only Vertical Keystone Correction Angle (°)Horizontal Keystone Correction Angle (°)Vertical Keystone Correction Angle (°)Horizontal Keystone Correction Angle (°)R2/L2 minimum valueR3/L3 minimum valueR2/L2 minimum valueR3/L3 minimum value ∗ ∗ ∗ For DZ12000, the above value changes apply.1