Home > Panasonic > Security Camera > Panasonic Network Camera Wv Sw158 Installation Guide

Panasonic Network Camera Wv Sw158 Installation Guide

Here you can view all the pages of manual Panasonic Network Camera Wv Sw158 Installation Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.

Page 31

31
 Attach the enclosure to the camera by using the tamperproof screw bit (accessory) to tighten 
the 3 enclosure fixing screws (M3). (Recommended tightening torque: 0.8 N·m {8.0 kgf·cm})
  Remove the cover film completely.
IMPORTANT: 
  •  When attaching the enclosure the focus may be slightly disturbed. If this occurs, remove the 
enclosure and make the necessary adjustments.
  •  Before attaching the enclosure, make sure that the subject is present.
  •  Securely tighten all the fixing screws (x3)...

Page 32

32
Configuring the camera so that it can be accessed from a PC
The following are descriptions for when the camera with default settings is configured. If you are using fire-
wall software on your PC, the Setup Program may not be able to find any cameras on your network. 
Configure the setting of the camera after temporarily invalidating the firewall software. Contact the network 
administrator or your Internet service provider for information about configuring the settings of the network.
  Insert the...

Page 33

33
 If the installation screen of the viewer software “Network Camera View 4S” is displayed, follow 
the instructions of the wizard to start the installation. (The viewer software is installed from the 
camera.)
  •  The “Live” page will be displayed.
  •  If you cannot install the viewer software “Network Camera View 4S” or if images are not dis-
played, click the [Install] button next to [Viewer Software] on the launcher window to install the 
software.
  •  Perform the [Time & date] settings in the...

Page 34

34
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the 
table or a problem is not described below. 
Symptom Cause/solutionReference 
pages
Power is not turned on. 
  •  Are the PoE device and the network 
cable of the camera connected using a 
LAN cable?
   Check whether the connection is 
appropriately established.
  •  Depending on the PoE device, the 
power supply will stop when...

Page 35

35
• Basic
Power source:  PoE (IEEE802.3af compliant)
Power consumption:  PoE 48 V: 110 mA/5.3 W(Class 2 device)
Ambient operating temperature:  -30 °C to +50 °C {14 °F to 122 °F}
Ambient operating humidity:  Less than 90 % (no condensation)
Waterproof:  Camera: IP66 (IEC60529)
   *  Only when installation work specified in this book is properly 
performed and appropriate waterproof treatment is performed 
Built-in microphone:  Electret condenser microphone 
Shock resistance:   Compliant with 50 J...

Page 36

36
Camera title on screen:  Up to 20 characters (alphanumeric characters, marks) 
On/Off
Video motion detection 
   (VMD alarm):  On/Off, 4 areas available
 
• Lens
Zoom ratio:  1x 
3x (2 megapixels under 640x360 resolution)
Focal length:  1.95 mm {5/64 inches}
Maximum aperture ratio:  1:2.2
Angular field of view:  Horizontal:  100°
    Vertical:  81° (3 megapixels [4:3])
   Horizontal: 95°
    Vertical:  62° (2/1.3 megapixels [16:9]) 
   Horizontal: 84°
    Vertical:  68° (1.3 megapixels [4:3])...

Page 37

37
Image compression method*1:  Frame rate:
      1fps/ 3fps/ 5fps/ 7.5fps/ 10fps/ 12fps*/ 15fps/ 20fps/ 30fps
      * E model only
   JPEG (MJPEG)
    Image quality: 
     0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/  
9 LOW (10 steps: 0-9)
    Transmission type: PULL/PUSH
Transmission interval:  0.1 fps - 30 fps (JPEG frame rate will be restricted when dis-
playing both JPEG and H.264 images.)
Cropping function:  2 megapixels [16:9] 
    H.264   640×360/ 320×180, Max. 30 fps 
    MJPEG   640×360/...

Page 38

38
OS*3 *4: Microsoft® Windows® 8
   Microsoft® Windows® 7
   Microsoft® Windows Vista®
   Microsoft® Windows® XP SP3
Browser: Windows® Internet Explorer® 10.0 (32-bit)
   Windows® Internet Explorer® 9.0 (32-bit)
   Windows® Internet Explorer® 8.0 (32-bit)
   Windows® Internet Explorer® 7.0 (32-bit)
Maximum concurrent 
   access number:  14 (Number of sessions that can connect to cameras at the 
same time)
    * Depends on network conditions
FTP client:  Alarm image transmission, FTP periodic...

Page 39

39
Installation Guide (this document) .................................................... 2 pcs.
Important Safety Instructions .............................................................1 pc.
Warranty card ....................................................................................1 pc.
CD-ROM*
1 ........................................................................................1 pc.
Code label*2 ......................................................................................1  pc....

Page 40

40
For U.S. and Canada:
Panasonic System Communications  
Company of North America,
Unit of Panasonic Corporation  
of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Three Panasonic Way, Secaucus,  
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive, Mississauga,  
Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca
© Panasonic System Networks Co., Ltd. 2013
sL0513-0       PGQX1325ZA       Printed in ChinaFor Europe and other countries:
Panasonic...
Start reading Panasonic Network Camera Wv Sw158 Installation Guide

Related Manuals for Panasonic Network Camera Wv Sw158 Installation Guide

All Panasonic manuals