Panasonic Memory Card Camera Recorder Ajhpx3000g Operating Instructions

							171Menu : Menu Description Tables
 Menu
zWhen the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
MANUAL KNEE
ON
KNEE POINT
85.0%
KNEE SLOPE
50
‹Note
All items in CAMERA SETTING are setting targets of the
item PAINT MENU SW(
„) R/W in the  screen.
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved Adjustable 
Range
 Remarks 
GAMMA 
MODE SELDFLT
HD
SD
FILMLIKE1
FILMLIKE2
FILMLIKE3
FILM-REC
For selecting the gamma mode.DFLT:This will operate as SD gamma in 
SD mode, or HD gamma in HD 
mode.
HD:
Video gamma characteristics for HD 
(High Definition)
SD:
The gain in the dark section is higher 
than the HD gamma.
FILMLIKE1:
The cinema gamma characteristics 
for video applications are selected.
FILMLIKE2:
The cinema gamma characteristics 
for video applications are selected.
In this setting gradations in highlit 
areas can be expressed better than 
when FILM LIKE1 is selected.
FILMLIKE3:
The cinema gamma characteristics 
for video applications are selected.
In this setting gradations in highlit 
areas can be expressed better than 
when FILM LIKE2 is selected.
FILM-REC:
The cinema gamma characteristics 
for film applications are used.
SCUFR
 DYNAMIC LVL 200%
300%
400%
500%This is enabled when FILM REC is 
selected in GAMMA MODE SEL. Set 
the BLACK STRECH position.
SCUFR
 BLACK STR 
 LV L00% : 30%
This is enabled when FILM REC is 
selected in GAMMA MODE SEL. Set 
the dynamic range.
SCUFR
SD
HDFILMLIKE1
FILMLIKE2FILMLIKE3FILM-REC
Video level
Luminance
„CAMERA SETTING
Items/
Data Saved Adjustable 
Range
 Remarks 
DETAILON
OFF
For switching ON/OFF of the detail 
signals.
SCUFR
2D LPF ON
OFFFor specifying whether or not to enable 
or disable the 2-dimension LPF, which 
reduce the cross color (for the SD mode 
only).
‹NoteIn PAL mode,  the 2-dimension LPF is 
disable.
SCUFR
HIGH COLOR ON
OFFON/OFF switching for the HIGH COLOR 
mode, which enhances the color 
dynamic range. 
‹NoteWhile DRS operates, selection of “ON” 
in this item is not reflected in the 
operation.
SCUFR
GAMMAONOFF
For switching ON/OFF of the gamma 
correction.
SCUFR
TEST SAW ON
OFFSwitch the test signal ON or OFF. 
SCUFR
FLAREONOFF
Set the flare correction to ON or OFF. 
SCUFR
H-F COMPE. ON
OFFFor switching ON/OFF of the aperture 
correction.
SCUFR
AJ-HPX3000G(VQT1D27)E.book  171 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							172Menu : Menu Description TablesZEBRA Pattern Display
The ____ in the Adjustable Range column indicates the
preset mode. 
VF
VF DISPLAY
Items/
Data Saved Adjustable 
Range
 Remarks 
DISP 
CONDITIONNORMAL
HOLD
NORMAL:Display status constantly. 
HOLD:Display status only when the 
MODE CHECK switch is 
pressed. 
–CUFR
DISP MODE 1
2
3Set the DISP MODE. 
Switch the camera’s Warning/Message 
indication. Please refer to [
Display 
Modes and Setting Changes/adjustment 
Result Messages
] (page 77) for more 
information. 
–CUFR
VF OUTY
NAM
R
G
B
For selecting the video signals to display 
in the viewfinder screen.
Y:Brightness signal
NAM:Output signal with the highest 
level among R, G, and B signals. 
R:Rch signal
G:Gch signal
B:Bch signal
–CUFR
VF DTL0 : 5
For setting the detail level of the 
viewfinder screen.
The details of the signals for the 
viewfinder are further enhanced. If 0 is 
selected, then the detail is the same as 
that for the main line.
–CUFR
ZEBRA1 
DETECT0% : 70% : 109%
Set the ZEBRA1 detection level (IRE 
value). 
–CUFR
ZEBRA2 
DETECT0% : 85% : 109%
Set the ZEBRA2 detection level (IRE 
value). 
–CUFR
ZEBRA2 ON
SPOT
OFF
Set the ZEBRA2 to ON, OFF, or SPOT. 
–CUFR
LOW LIGHT 
LV LOFF
10%
15%
20%
25%
30%
35%Set the camera incoming light volume at 
which to display LOW LIGHT. 
–CUFR
RC MENU 
DISP.ONOFF
For the setting to display the menu in the 
viewfinder screen when the remote 
control unit is connected to the unit.
–CUFR
50M 
INDICATORON
OFFFor specifying whether to enable or 
disable the 50M LED inside the SD 
viewfinder when the REC MODE menu 
option is set to DVCPRO50. (In SD 
mode only
£–CUFR
MARKER/
CHAR LVL50%
60%
70%
80%
90%
100%
Adjust the brightness of markers and 
characters displayed on the VF. 
–CUFR
SYNCHRO 
SCAN DISP.secdeg
For setting the unit to indicate 
SYNCHRO SCAN mode.
sec:
indicates timedeg:indicates the opening angle of 
the shutter.
–CUFR
SPOT OFF ON
109%
0% ZEBRA 2
DETECTZEBRA 2
ZEBRA 1
DETECT
Video Level
AJ-HPX3000G(VQT1D27)E.book  172 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							173Menu : Menu Description Tables
 Menu
‹Note
When SYSTEM MODE is set to either “1080-59.94i” or
“1080-50i” (in HD mode), the safety zone marker, the
safety zone area, and the frame marker are displayed on
the LCD monitor or the SD viewfinder if “LT-BOX” or “S-
CROP” is selected in DOWNCON MODE.
zThe user box can be displayed in any position as a
boxtype cursor.
‹Note
When SYSTEM MODE item is set to either “1080-59.94i”
or “1080-50i” (in HD mode), the user box is not displayed
on the LCD monitor or the SD viewfinder if “LT-BOX” or “S-
CROP” is selected in DOWNCON MODE.
The ____ in the Adjustable Range column indicates the
preset mode. 
VF MARKER
Items/
Data Saved Adjustable 
Range
 Remarks 
TA B L EA
B
Select the VF MARKER setting table. 
First, select table A or B, then set the 
items below for each table. 
–CUFR
CENTER 
MARKOFF
1
2
3
4
Switch the center mark. 
OFF:Do not display center mark. 
1:+ (large)
2:Hollow (large)
3:+ (small)
4:Hollow (small)
–CUFR
SAFETY 
MARKOFF
1
2Select the frame type for the safety 
zone. 
OFF:Do not display frame. 
1:Box
2:Corner frame
–CUFR
SAFETY 
AREA80% : 90% : 100%
For setting the size of the safety marker.
It is possible to set the size by units of 
1% with a fixed ratio between of width 
and height.
–CUFR
FRAME MARK ON
OFFSet the frame marker to ON or OFF. 
–CUFR
FRAME SIG4:313:9
14:9
VISTA
Set the frame marker. 
Only enabled when REC MODE is set to 
16:9. 
The VISTA ratio is 16:8.65. 
–CUFR
FRAME LVL 0 : 15
Set the level outside the frame marker. 0:Equivalent to signal OFF. ¢Blanking 
status£
15:Same brightness as center area. 
–CUFR
VF USER BOX
Items/
Data Saved Adjustable 
Range
 Remarks 
USER BOX ON
OFFFor setting whether the user box is 
displayed in the viewfinder or not.
–CUFR
USER BOX 
WIDTH1 : 13 : 100
For setting the horizontal width of the 
user box.
–CUFR
USER BOX 
HEIGHT1 : 13 : 100
For setting the horizontal position of the 
user box center.
–CUFR
USER BOX H 
POS–50 : +00 : +50
For setting the horizontal position of the 
user box center.
–CUFR
USER BOX V 
POS–50 : +00 : +50
For setting the vertical position of the 
user box center.
–CUFR
AJ-HPX3000G(VQT1D27)E.book  173 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							174Menu : Menu Description Tables The ____ in the Adjustable Range column indicates the
preset mode. 
VF INDICATOR1
Items/
Data Saved Adjustable 
Range
 Remarks 
EXTENDERON
OFF
For selecting ON or OFF for the 
extender display.
–CUFR
SHUTTERONOFF
Set the shutter speed indication to ON 
or OFF. 
–CUFR
FILTERONOFF
Set the filter No. indication to ON or 
OFF. 
–CUFR
WHITEON
OFF
Set the AWB PRE/A/B indication to ON 
or OFF. 
–CUFR
GAINONOFF
For selecting ON/OFF of the gain 
currently selected, S.GAIN and DS. 
GAIN displays.
–CUFR
IRIS OFF
IRIS
S+IRIS
S
OFF:Disable indications of both the
super iris ON status and the iris
value. 
IRIS:Enable only the iris value
indication. 
S+IRIS:Enables indications of the super
iris ON status and the iris value. 
S:Enable indication of the super
iris ON status. 
zThe display of the aperture value and
the display of the iris override are
interlinked. When the iris override is
changed, it is forcibly displayed for 3
seconds.
–CUFR
CAMERA IDBAROFF
For setting to record the camera ID.BAR:The camera ID is recorded when 
the color bar signals are recorded.
OFF:Disable ID mix. 
–CUFR
ID POSITION UPPER R
UPPER L
LOWER R
LOWER L
For setting the position to display the 
camera ID.
UPPER R:Upper right. UPPER L:Upper left. LOWER R:Lower right. 
LOWER L:Lower left. 
–CUFR
DATE/TI ME ON
OFFFor selecting an option to display year/
month/day and hour/minute/second 
simultaneously when the camera ID is 
displayed.
–CUFR
ZOOM LVLON
OFF
Set the zoom position indication to ON 
or OFF. 
–CUFR
COLOR TEMPONOFF
Set the color temperature indication to 
ON or OFF. 
–CUFR
SYSTEM 
MODEON
OFFFor selecting ON or OFF for the 
SYSTEM MODE and REC MODE 
display.
–CUFR
CAMERA 
MODEON
OFF
For selecting ON/OFF of the CAMERA 
MODE display.
–CUFR
VF INDICATOR2
Items/
Data Saved Adjustable 
Range
 Remarks 
CACON
OFF
For selecting ON or OFF for the color 
astigmatism correction display
–CUFR
FILM-REC 
MODEONOFF
For selecting whether to indicate that the 
Gamma Select is set to the FILM REC 
mode.
–CUFR
VF INDICATOR3
Items/
Data Saved Adjustable 
Range
 Remarks 
P2CARD 
REMAINOFF
ONE-CARD
TOTALSelect the indication mode for the P2 
card’s remaining capacity. 
OFF:Disable the remaining capacity 
indication. 
ONE-CARD:
Display the remaining capacity of the 
P2 card currently used for recording. 
TOTA L:Display the total remaining 
capacity of all P2 cards in slots. 
–CUFR
BATTERYON
OFF
Set the battery voltage indication to ON 
or OFF. 
–CUFR
AU DIO  LVLONOFF
Set the audio lever meter indication to 
ON or OFF. 
–CUFR
TC ON 
COLOR BARON
OFFSelect whether the time code is to be 
displayed or not on the color bar.
‹Note
The time code is displayed on the color 
bar but it is not recorded.
•CU F R
TCOFFTCG
TCR
TCG/TCR
Select the time code to display. 
OFF:Disable the time code display.
TCG:Display the time code generator 
value in recording mode. 
TCR:Display the time code reader 
value in playback mode. 
TCG/TCR:
Display the time code generator value 
in recording mode, and the time code 
reader value in playback mode. 
–CUFR
SYSTEM INFO OFF
ALWAYS
NORMALSelect the method of displaying system 
information and warnings.
OFF:Display no warnings other than 
“TURN POWER OFF” and 
“SYSTEM ERROR”.
ALWAYS:
Always display warnings.NORMAL:
Display warnings for 3 seconds only 
when problems occur. –CUFR
SAVE LEDSAVEP2CARD
Set the SAVE lamp function. 
SAVE:
The lamp lights up when the SAVE 
ON/OFF switch is set to ON and the 
output system assigned in [
OPTION 
MODE] (page 160) is in the save 
mode.
P2CARD:
The lamp blinks in synch with the 
warning message when the P2 card’s 
remaining recording capacity is 
getting low.  –CUFR
AJ-HPX3000G(VQT1D27)E.book  174 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							175Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved Adjustable 
Range
 Remarks 
REC STATUS ON
OFFSelect whether or not to enable “REC” 
indication in the viewfinder and on the 
LCD monitor during recording.
ON:REC indication enabled.
OFF:REC indication not enabled.
‹Note
This option is useful when camera-
recorder is used independently. When 
the 1394 CONTROL menu option on the 
1394 SETTING screen is set to BOTH, 
then the setting of the REC TALLY menu 
option for SYSTEM MODE is used.
–CUFR
PROXY REC ON
OFFWhen a video encoder card (AJ-
YAX800G, optional) is attached, proxy 
recording information is displayed when 
recording starts.
ON:Display indicating whether proxy 
recording is to be performed on the 
P2 card only, or on both the P2 card 
and the SD memory card.
OFF:Proxy recording information is not 
displayed.
–CUFR
MODE CHECK IND
Items/
Data 
Saved Adjustable 
Range
 Remarks 
STATUSON
OFF
For the setting to display the status 
screen when the MODE CHECK button 
is pressed.
–CUFR
!LEDONOFF
For the setting to indicate causes for 
turning on the   lamp on the viewfinder 
is displayed when the MODE CHECK 
button is pressed.
The causes for turning on the   lamp 
are displayed with  .
–CUFR
FUNCTIONONOFF
For the setting to display the FUNCTION 
screen when the MODE CHECK button 
is pressed.
–CUFR
AU DI O O N
OFF
For the setting to display the AUDIO 
screen when the MODE CHECK button 
is pressed.
–CUFR
CACONOFF
The setting to display the CAC screen 
when the MODE CHECK button is 
pressed.
–CUFR
P.ON INDONOFF
For the setting to display the status 
screen immediately after turning on the 
power of the unit.
‹NoteEven if it is set to “ON” in this item, the 
status screen is not displayed 
immediately after turning on the power of 
the unit when the STATUS item is set to 
OFF.
–CUFR
!
!LED
Items/
Data Saved Adjustable 
Range
 Remarks 
GAIN(0dB)ON
OFF
For the setting to turn the   lamp on the 
viewfinder on when the GAIN is set to a 
value other than 0 dB.
–CUFR
GAIN (–3dB) ON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the GAIN is set to a 
value other than –3dB.
–CUFR
DS.GAIN ON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the DS. GAIN 
(cumulative gain) is activated.
–CUFR
SHUTTERON
OFF
For the setting to turn the   lamp on the 
viewfinder on when the electronic 
shutter is activated.
–CUFR
WHITE 
PRESETON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the WHITE BAL 
switch is set to the PRST position.
–CUFR
EXTENDERONOFF
For the setting to turn the   lamp on the 
viewfinder on when the lens extender is 
activated.
–CUFR
B.GAMMA ON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the BLACK GAMMA 
is activated.
–CUFR
MATRIX ON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the color correction 
table for the linear matrix is selected.
–CUFR
COLOR 
CORRECTIONON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the 12-axis 
independent color correction is selected.
–CUFR
FILTER ON
OFFFor the setting to turn the   lamp on the 
viewfinder on when the filter 
combination is anyone other than 3200K 
and CLEAR.
–CUFR
AJ-HPX3000G(VQT1D27)E.book  175 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							176Menu : Menu Description Tables
‹Note
This setting is canceled when READ FACTORY DATA is
selected. 
The ____ in the Adjustable Range column indicates the
preset mode. 
CAM OPERATION
CAMERA ID
Items/
Data Saved Adjustable 
Range
 Remarks 
ID1¢¢¢¢¢¢¢
¢¢¢Setting 1 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF–
ID2¢¢¢¢¢¢¢
¢¢¢Setting 2 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF–
ID3¢¢¢¢¢¢¢
¢¢¢Setting 3 for the CAMERA ID recorded 
on color bars. Up to 10 characters are 
allowed for this setting.
–CUF–
SHUTTER SPEED
Items/
Data Saved Adjustable 
Range
 Remarks 
SYNCHRO 
SCANON
OFF
Allocate SYNCHRO SCAN as a shutter 
speed selectable by the shutter switch. 
–CUF–
POSITION1ONOFF
Allocate the shutter speed set by 
POSITION1 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
POSITION2ON
OFF
Allocate the shutter speed set by 
POSITION2 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
POSITION3ONOFF
Allocate the shutter speed set by 
POSITION3 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
POSITION4ONOFF
Allocate the shutter speed set by 
POSITION4 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
POSITION5ON
OFF
Allocate the shutter speed set by 
POSITION5 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
POSITION6ONOFF
Allocate the shutter speed set by 
POSITION6 SELECT in the  screen as the shutter speed 
selectable by the shutter switch. 
–CUF–
AJ-HPX3000G(VQT1D27)E.book  176 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							177Menu : Menu Description Tables
 Menu
‹Note
In remote control mode when the AJ-RC10G is connected,
the settings for the shutter are set to the value recorded on
the AJ-RC10G.
The ____ in the Adjustable Range column indicates the
preset mode. 
SHUTTER SELECT
Items/
Data Saved Adjustable 
Range
 Remarks 
POSITION1 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 1.
1/100: 59.94 Hz
1/60: 50Hz
–CUF –
POSITION2 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 2.
1/100: 59.94 Hz
1/60: 50Hz
–CUF –
POSITION3 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 3.
1/100: 59.94 Hz
1/60: 50Hz
–CUF –
POSITION4 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 4.
1/100: 59.94 Hz
1/60: 50Hz
–CUF –
Items/
Data Saved Adjustable 
Range
 Remarks 
POSITION5 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 5.
1/100: 59.94 Hz
1/60: 50Hz
–CUF–
POSITION6 
SEL
1/100
1/120
1/250
1/500
1/1000
1/2000
HALF
180.0deg
172.8deg
144.0deg
120.0deg
90.0deg
45.0deg
For setting the shutter speed for 
POSITION 6.
1/100: 59.94 Hz
1/60: 50Hz
–CUF–
AJ-HPX3000G(VQT1D27)E.book  177 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							178Menu : Menu Description TablesThe ____ in the Adjustable Range column indicates the
preset mode. 
USER SW
Items/
Data Saved Adjustable 
Range
 Remarks 
USER MAIN 
SWINH
S.GAIN
DS.GAIN
S.IRIS
I.OVR
S.BLK
B.GAMMA
Y GET
DRS
ASSIST
C. TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER MAIN button. For 
descriptions of the functions, see 
[Assigning Functions to USER MAIN, 
USER1 and USER2 Buttons] (page 51).
–CUFR
USER1 SW INH
S.GAIN
DS.GAIN
S.IRIS
I.OVR
S.BLK
B.GAMMA
Y GET
DRS
ASSIST
C. TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER1 button. For 
descriptions of the functions, see 
[Assigning Functions to USER MAIN, 
USER1 and USER2 Buttons] (page 51).
–CUFR
USER2 SW INH
S.GAIN
DS.GAIN
S.IRIS
I.OVR
S.BLK
B.GAMMA
Y GET
DRS
ASSIST
C. TEMP
AUDIO CH1
AUDIO CH2
REC SW
RET SW
PRE REC
SLOT SEL
PC MODE
Allocate the USER2 button. For 
descriptions of the functions, see 
[Assigning Functions to USER MAIN, 
USER1 and USER2 Buttons] (page 51).
–CUFR
SW MODE
Items/
Data Saved Adjustable 
Range
 Remarks 
RET SW R.REVIEW
CAM RET
For setting the function when the USER 
button on the unit, to which the RET 
button of the lens or the RET SW 
function is allocated, is pressed.
R.REVIEW:
REC view function
It is possible to check a last few 
seconds of the records taken.
CAM RET:
Return video function
It is possible to confirm the return 
video signals (HD: analog HD-Y 
signals, SD: VBS signals) supplied to 
the GENKLOCK IN connector on the 
unit by using the viewfinder.
‹Notes
zWhen video signals in a format
different from that for the video mode
of the camera-recorder, return video
is not properly displayed.
zWhen the GENLOCK item (the
GENLOCK screen on the SYSTEM
SETTING page) is set to INT, the
return video image may be displayed
as slightly shaking horizontally. –CUFR
S.BLK LVL OFF
–10
–20
–30
For setting the super black level.
–CUFR
AUTO KNEE 
SWON
OFF
DRS
For selecting ON/OFF of the AUTO 
KNEE function and DRS function.
When it is set to OFF, the AUTO KNEE 
may not function even if the AUTO 
KNEE switch is turned ON.
When the DRS function is enabled and 
the AUTO KNEE switch is positioned to 
ON, the DRS function turns on.
SCUFR
SHD,ABB SW 
CTLON
OFF
For the setting to adjust the black 
shading automatically when the AUTO 
W/B BAL switch is held to the ABB side 
for 8 seconds or more. 
–CUFR
COLOR BARSSMPTEFULL BARS
SPLIT
ARIB
For selecting the color bar to be used.
SMPTE:Color bar complied with the 
SMPTE standards
FULL BARS:Full color bar 
SPLIT:SPLIT color bar for SNG 
(Satellite News Gathering)
ARIB:Color bar complied with the 
ARIB standards
–CUFR
S.GAIN OFFL/M/HS.GAIN
For selecting the method used to 
release the super gain mode.
L/M/H:Disabled when the gain 
selector switch (USER 
button) is operated. 
S.GAIN:Disabled only with the 
S.GAIN switch (USER 
button). 
–CUFR
AJ-HPX3000G(VQT1D27)E.book  178 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							179Menu : Menu Description Tables
 Menu
The ____ in the Adjustable Range column indicates the
preset mode. 
Items/
Data Saved Adjustable 
Range
 Remarks 
DS.GAIN OFF L/M/H
DS.GAINFor selecting the method used to 
release the digital super gain mode 
(cumulative gain).
L/M/H:The mode is released by 
making a change in the L/M/H 
switch position and the 
DS.GAIN switch (USER 
switch).
DS.GAIN:The mode is released using 
only the DS.GAIN switch 
(USER switch).
–CUFR
RC CHECK 
SWR.REVIEW
PLAY
For specifying what the camera-recorder 
does when the REC check button on the 
remote control unit is pressed.
R.REVIEW:The camera-recorder 
performs rec review.
PLAY:The camera-recorder 
performs playback.
–CUFR
WHITE BALANCE MODE
Items/
Data Saved Adjustable 
Range
 Remarks 
FILTER INHONOFF
For selecting independently whether 
memory data for white balance (Ach, 
Bch) is retained or not for the respective 
CC filters.
ON:Regardless of the CC filter, data for 
the memories (2 memories) for Ach 
and Bch is retained.
OFF:The memory data (8 memories) for 
Ach and Bch is retained for the 
respective CC filters.
–CUFR
SHOCKLESS 
AWBOFF
FA S T
NORMAL
SLOW1
SLOW2
SLOW3
For setting the length of time for 
transiting to the switched position of 
white balance, when the position of the 
WHITE BAL switch is changed.
OFF:To transit instantly
FA S T:About 1 second
NORMAL:About 2 seconds
SLOW1:About 3 seconds
SLOW2:About 10 seconds
SLOW3:About 20 seconds
–CUFR
AWB AREA25%50%
90%
For switching the detection area for 
executing the automatic adjustment of 
white balance.
25%:An area near the screen center 
equivalent to 25% of the screen is 
detected.
50%:An area near the screen center 
equivalent to 50% of the screen is 
detected.
90%:An area equivalent to 90% of the 
screen is detected.
–CUFR
TEMP PRE 
SEL SWVA R3.2K/5.6K
For selecting whether the PRESET color 
temperature is variable or switchable 
between 3200K and 5600K. 
Immediately after revising the value, the 
color temperature for PRESET is set to 
3200K (For Filter A).
VA R :Selectable within the range from 
2300K
; to 8000K.
3.2K/5.6K:
Switchable between 3200K and 
5600K.
–––F–
Items/
Data Saved Adjustable 
Range
 Remarks 
COLOR TEMP 
PRE2300K;

3200K

8000K
3200K
5600K
For setting the color temperature when 
the WHITE BAL switch is set to the 
PRST position.
The PRESET color temperature 
selected in TEMP PRE SEL SW is set.
2300K
; - 8000K:
When VAR was selected in TEMP 
PRE SEL SW.
3200K/5600K:
When 3200K/5600K was selected in 
TEMP PRE SEL SW.
zSince the range of color temperatures
that can be set will vary with the CC
filter position, a numerical value can-
not be changed even if the color tem-
perature is changed when a high color
temperature is set.
–––F–
AWB A TEMP 2300K;

3200K

8000K
For setting the color temperature when 
the WHITE BAL switch is set to the A 
position.
If the automatic adjustment of white 
balance is executed in the A position, 
the color temperature at that time is 
memorized in the position of the WHITE 
BAL switch A. If the white balance has 
been automatically adjusted or the CC 
filter has been switched, then up to 
9000K may be indicated.
–––F–
AWB B TEMP 2300K;

3200K

8000K
For setting the color temperature when 
the WHITE BAL switch is set to the B 
position.
If the automatic adjustment of white 
balance is executed in the B position, 
the color temperature at that time is 
memorized in the position of the WHITE 
BAL switch B. If the white balance has 
been automatically adjusted or the CC 
filter has been switched, then up to 
9000K may be indicated.
–––F–
AJ-HPX3000G(VQT1D27)E.book  179 ページ  ２００７年９月３日　月曜日　午後２時３４分 
						

							180Menu : Menu Description Tables
‹Note
When the DS.GAIN function is active, the shutter mode is
set to OFF.
The ____ in the Adjustable Range column indicates the
preset mode. 
USER SW GAIN
Items/
Data Saved Adjustable 
Range
 Remarks 
S.GAIN
30 dB¢

Select whether or not to enable 30dB for 
SUPER GAIN. 
¢: Enable. 
  : Disable. 
–CUFR
36 dB¢

Select whether or not to enable 36dB for 
SUPER GAIN. 
¢: Enable. 
  : Disable.
–CUFR
DS.GAIN
6 dB
:
¢

Select whether or not to enable 6 dB: for 
DS.GAIN. 
¢: Enable. 
  : Disable.
–CUFR
10 dB:¢

Select whether or not to enable 10 dB: 
for DS.GAIN. 
¢: Enable. 
  : Disable.
–CUFR
12 dB:¢

Select whether or not to enable 12 dB: 
for DS.GAIN. 
¢: Enable. 
  : Disable.
–CUFR
15 dB:¢

Select whether or not to enable 15 dB: 
for DS.GAIN. 
¢: Enable. 
  : Disable.
–CUFR
20 dB:¢

Select whether or not to enable 20 dB: 
for DS.GAIN. 
¢: Enable. 
  : Disable.
–CUFR
LENS/IRIS
Items/
Data Saved Adjustable 
Range
 Remarks 
A.IRIS LEVEL 000 : 045 : 100
Set the target value for auto iris. 
–CUFR
A.IRIS PEAK/
AV E000 : 030 : 100
Determine the peak-to-standard ratio for 
the auto iris. 
A larger value sets the auto iris to 
respond to the peak in the IRIS 
detection window, while a smaller value 
sets it to respond to the average value in 
the window. 
–CUFR
A.IRIS 
WINDOWNORM1NORM2
CENTR
Select the auto iris detection window. 
NORM1:The window closer to the center
of the screen. 
NORM2:The window closer to bottom of
the screen. 
CENTR:The spot window in the center of
the screen. 
–CUFR
S.IRIS LEVEL 000 : 080 : 100
Set the target value for the super iris 
(Backlight correction function). 
–CUFR
IRIS GAIN CAM
LENSSelect which unit controls IRIS GAIN. ‹NoteLenses with an extender, such as a2, 
a0.8 sold before FUJINON DIGI 
POWER, perform IRIS compensation 
while enabling the extender. Therefore, if 
this setting is switched to CAM, the 
camera’s iris control will not operate 
properly. 
–CUFR
IRIS GAIN 
VA L U E01 : 10 : 20
Set the adjustable value for IRIS GAIN. 
This setting is effective when CAM is 
selected for IRIS GAIN. 
–CUFR
AJ-HPX3000G(VQT1D27)E.book  180 ページ  ２００７年９月３日　月曜日　午後２時３４分