Panasonic Kx Tg2205 Text Sheet Manual

							This document is a text description of the control panel layout for the product listed below.   
“PDF” files of the complete operating instructions are 
available from the Customer Support section of 
www.Panasonic.com.
   
If you need  the operating  instructions in an alternate 
format, please request it from Customer Support.      
 
Model Number KX-TG2205W 
2.4GHz Digital Cordless Phone   
 
Handset 
With the handset facing you, the antenna is a narrow 2 inch long protrusion at the top right. Just below the 
top on the front of the handset is a shallow oval concave. This is the earpiece. On the smooth surface 
below the earpiece, there are two thin buttons. The left one is the MUTE button with an indicator light 
just above it. The MUTE indicator light is also th e TALK indicator light. The right one is the PROGRAM 
button. Above the PROGRAM button is the RECHARGE indicator light. In the center below these 
buttons is the NAVIGATOR control, which is a larg e rectangular control with four active areas. The 
active areas are the 12 oclock, 3 oclock, 6 oclock and 9 oclock positions. The 12 and 6 oclock positions 
are the volume control up and down keys respectively. The 3 and 9 oclock positions are the right and left 
arrow keys. These are also the AUTO and CH keys respectively. 
To the upper left of the NAVIGATOR control, an oval button with a clipped edge is the TALK button. 
The oval button below the TALK button is the SPEAKERPHONE button. To the upper right of the 
NAVIGATOR control, an oval button with a clipped edge is the OFF button. The oval button below the 
OFF button is the HOLD button.   
Below these buttons is the telephone keypad laid out in the conventional telephone arrangement with a 
nib on the 5 button. On the lower left below the keypad is the FLASH button. The FLASH button is 
also the CALL WAIT button. On the lower right of the keypad is the REDIAL button. The REDIAL 
button is also the PAUSE button. 
The indentation between the FLASH and REDIAL button is the microphone. 
The 2 metal ridges at the bottom of the handset are the charge contacts. 
The headset jack is on the left side of the handset, at almost the same height as the top row of the buttons. 
It has a rubber cover that can be opened by pulling down, and is not removable.  
						

							 
Base unit 
With the base unit facing you, the antenna should be straight up on the right side, towards the back of the 
unit. The handsets charging cradle is on the left of the base unit. This is an inch deep depression. For 
charging, the bottom of the handset gets put into the cradle with the handset buttons facing up. The unit 
will beep when the handset is properly placed in the cradle for charging. The handset can be placed in the 
cradle in an inverted position.   
On the front to the right of the unit, there is a large round button. This is the HANDSET LOCATOR 
button. Above the HANDSET LOCATOR button, there are 2 indicator lights in shallow circular 
depressions in a vertical column. The top one is the CHARGE indicator light. Below is the IN USE 
indicator light. The IN USE indicator light is also the HOLD indicator light. 
 
 
 
 
 
 
 
PQQX13355YA-BM     September 26, 2002