Home
>
Panasonic
>
Camera Lens
>
Panasonic Interchangeable Lens For Digital Camera H-fs100300 Operating Instructions
Panasonic Interchangeable Lens For Digital Camera H-fs100300 Operating Instructions
Here you can view all the pages of manual Panasonic Interchangeable Lens For Digital Camera H-fs100300 Operating Instructions. The Panasonic manuals for Camera Lens are available online for free. You can easily download all the documents as PDF.
Page 1
Operating Instructions INTERCHANGEABLE LENS FOR DIGITAL CAMERA Model No. H-FS100300 Before connecting, operating or adjusting this product, please read the instructions completely. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or send e-mail to: [email protected] PP VQT2Z58 until 2010/10/1...
Page 2
2VQT2Z58ContentsInformation for Your Safety ..................................... 2Precautions ........................................................... 5 Supplied Accessories ............................................. 6 Attaching/Detaching the Lens ................................. 6 Names and Functions of Components ................... 9 Cautions for Use ................................................... 10 Troubleshooting .................................................. 10...
Page 3
3 VQT2Z58 ≥The digital camera illustrations in these operating instructions show DMC-GH2 as an example. ≥ The appearance and specifications of products described in this manual may differ from the actual products you have purchased due to later enhancements. ≥ Micro Four Thirds TM and Micro Four Thirds Logo marks are trademarks or registered trademarks of Olympus Imaging Corporation, in Japan, the United States, the European Union and other countries. ≥ Four Thirds TM and Four Thirds Logo marks...
Page 4
4VQT2Z58THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications....
Page 5
5 VQT2Z58 ∫Lens Care≥Sand and dust can damage the lens. Make sure that no sand or dust gets inside the lens or the terminals when using the lens on a beach, etc. ≥ This lens is not waterproof. If drops of water get onto the lens, wipe the lens with a dry cloth. ≥ Do not press the lens with excessive force. ≥ When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after...
Page 6
6VQT2Z58Supplied Accessories[Inspection to be performed when you unpack the unit] When removing the unit from its packing box, check that the main unit and the supplied accessories are there and also check their external appearance and functions to verify that they have not sustained any damage during distribution and transportation. If you discover any trouble, contact your vendor before using the product. Product numbers correct as of October 2010. These may be subject to change.1 Lens Storage...
Page 7
7 VQT2Z58 ∫Detaching the Lens≥Check that the camera is turned off.Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.• Attach the lens rear cap so that the lens contact point does not get scratched. • Attach the body cap to the camera so no dirt or dust will get inside the main unit.∫ Attaching and Detaching the Lens Cap≥Be careful not to lose the lens cap. ∫ Attaching the Lens Hood (Supplied Accessory)Insert the lens hood into...
Page 8
8VQT2Z582 Reverse the lens hood and then attach it in the same way as shown previously.• When taking pictures with the flash with the lens hood attached, the lower portion of the screen may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood. • When using the AF assist lamp in the dark, detach the lens hood.∫ Attaching Filters≥Vignetting may occur if using 2 or more MC...
Page 9
9 VQT2Z58 Names and Functions of Components1Lens surface 2 Focus ringRotate to focus when taking pictures with manual focus.3Zoom ringRotate the zoom ring when you wish to take large (tele) or wide (wide angle) pictures. (35 mm film camera equivalent: 200 mm to 600 mm) 4[O.I.S.] switchWhen the lens is attached to the camera the stabilizer function is set to activate if the [O.I.S.] switch is set to [ON]. ≥We recommend setting the [O.I.S.] switch to [OFF] when using a tripod. ≥ The stabilizer...
Page 10
10VQT2Z58Cautions for UseTake care not to drop or knock the lens. Also take care not to put a lot of pressure on the lens. ≥Take care not to drop the bag that you inserted the lens in as it may damage the lens. The camera may stop operating normally and pictures may no longer be recorded. When using pesticides and other volatile substances around the camera make sure that they do not get onto the lens. ≥If such substances get onto the lens they can damage the exterior case or cause the paint to...