Panasonic Interactive Plasma Display TH 103PB1 Operating Instructions

21
Using Web Browser
Network status page
Click [Status], then [Network status] to display the Status information page.
Displays the current con
 guration information of the network.
1 Displays the con guration details of wireless LAN.
You can configure settings when the wireless module (ET-WM200U) is mounted.
2 Displays the con guration details of wired LAN.
2 
1  

22
Using Web Browser
  Basic control page
To move from another page, click [Display control], then [Basic control].
1 
2 Use these to select the input signals
3  Operation of AV mute
4  Switches aspect mode
 
 
Detail control page
Click [Display control], then [Advanced control] to display the Detail control page.
1 Enter a command. Use the same command used for the serial control. 
(refer to “Operating Instructions, Display Operations”)
2 Response from the unit is displayed.
3 Command is sent and run....

23
Using Web Browser
  Change Password page
Click [Change password].
1
2
1 Administrator
2 User
Administrator mode
12
34
567
1 Account
2 Current user name input  eld
3 Current password input  eld
4 New user name input  eld
5 New password input  eld
6 New password input  eld (re-enter for con rmation)
7 Button for executing password change
User account
1
2
3
4
5
1 Account
2 New user name input  eld
3 New password input  eld
4 New password input  eld (re-enter for con rmation)
5 Button for...

24
Using Web Browser
Network con g page
You can make detail network settings on Display, when connecting without the administrator authority or when 
connecting through an access point (infrastructure mode).
LAN settings
Click [Detailed set up] in the menu.1
Select the items to change and click [Next].2The settings window appears, showing the current 
settings.
To  c h a n
ge the LAN settings, click [Change].•
To return to the previous window, click [Back].•
Complete the detailed settings and...

25
Using Web Browser
Click [Submit].4
The settings will be registered.
(Wireless LAN screen)
Making the above settings effective (Only for wireless LAN)
Select [WIRELESS LAN] in [NETWORK SETUP] menu of the Display, and select the network set in this page.
Important video/audio data is protected because AES encryption processing takes place.•
Changing the setting of LAN while connected with LAN might disconnect the connection.•
  Adjust clock page
Click [Detailed set up], then [Adjust clock] to display...

26
Using Web Browser
  Ping test page
This page makes it possible to check whether the network is connected to the DNS server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was success
ful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up]...

27
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your 
computer using PJLink™ protocol.
• Displa
y setup
• 
Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
PJLink™ security authentication
When using PJLink with security authorization, either of the password set for administrator privileges and the
password set for user privileges with Web browser...

  Trademarks
Microsoft•®, Windows®, Windows Vista®, and Internet Explorer® are the registered trademarks or trademarks of ®
Microsoft Corporation in the United States and/or other countries.
Macintosh, Mac, Mac OS, OS X and Safari are the trademarks of Apple Inc. registered in the United States and•
other countries.
PJLink is a pendin
g trademark in Japan, the United States and other countries and regions.•
HDMI, the HDMI logo and High-De nition Multimedia Interface are trademarks or registered...