Panasonic Home Photo Printer KX PX10 Operating Manual

Before Use
11
Storage
„ Storing paper and ink cassettes
After use, remove the paper cassette from the printer, close the cassette lid, leaving any 
remaining paper in the paper cassette. Then insert the paper cassette into a plastic bag and 
store so that it lies flat.
Avoid placing the paper and ink cassette in locations subject to high temperature, high 
humidity or direct sunlight. After opening the original packaging, use all the paper as soon 
as possible.
„ When the printer is not to be used for an...

12
  Power cord x 1
(Part number: PFJA02A007Z)
  AC adaptor x 1
(Part number: PFAP1016)
  Video cable x 1
(Part number: VJA0815-A)
 Starter kit
• Ink cassette x 1
(for postcard size paper,
enough for 5 prints)
• Postcard size paper ... 5 sheets 
(5 sheets x 1 bag)   Photo Printer x 1
  Postcard size paper cassette x 1
(Part number: PFZCPX1EX)
  Remote control x 1
(Part number: PFRM0002)
  Coin battery (CR2025) x 1
Others
 Operating  Instructions
(this manual) x 1
  Quick guide (in Spanish) x 1
  Warranty...

Before Use
13
Names and Functions of Each Part
Front View
PRINT Lamp 
(Green)
This lamp blinks while 
printing is in progress 
and lights up when 
waiting for printing.
ACCESS Lamp 
(Green)
This lamp lights 
up or blinks when 
image data is being 
accessed.
ERROR Lamp 
(Red)
This lamp lights up or 
blinks when an error 
occurs.
POWER Lamp 
(Red/Green)
Paper
Cassette
Compartment
Cover
POWER Button
PictBridge Terminal
( p. 24, 26)
MENU Button RETURN Button
DISPLAY Button
Switches between 
“Summary View”...

14
Rear View
Air Vent
Do not block.
USB Port
( p. 25, 88)
DC IN Port Ink Cassette 
Compartment CoverVideo Output 
Terminal (VIDEO 
OUT)
( p. 25, 28)
Memory Card 
Slot
( p. 29)
Ink Cassette Eject 
Lever
( p. 23)
Paper Jam Removal 
Lever
( p. 92)
PRINT Button
DISPLAY Button RETURN Button
SEARCH Button
Searches for 
images of the 
selected time 
period.
TRIMMING Button
Reduces or enlarges 
the image size 
(
 p. 67).
OK Button
ROTATE Button
Rotates images 90 degrees 
in the clockwise direction 
(
 p. 67)....

Preparation
15
Connecting a Power Source
DC IN port
AC adaptor
Power cord
1
POWER lamp
Wall outlet
Connect to household power 
supply (100 V to 240 V AC)
When the power cord is connected to wall outlet, the POWER lamp lights up in red (standby 
mode).
CAUTION:
•  Never touch the power cord during a lightning storm.
•  When you operate this product, the wall outlet should be near the product and easily 
accessible.
•  Use only the included AC adaptor and power cord.
2
3 

16
Caution
•  Risk of explosion if the battery is incorrectly replaced.
Replace only with type CR2025.
•  Dispose of used batteries according to local regulations.
1
Open the battery cover by 
sliding in the direction of the 
arrow.
2
Slide the coin battery into place 
with + terminal facing up.
3
Close the battery cover.
•To remove the coin battery
Ta b
Pressing down on the tab, slide out the coin battery and remove.
Inserting Battery into the Remote Control 

Preparation
17
  Remote control operational range
Important
•  Make sure there are no objects blocking the path between the printer and the remote control. 
The remote control may fail to operate the printer.
•  Do not allow the printer’s remote control receiver to come in contact with direct sunlight or 
strong fluorescent light. This may prevent the printer from working properly.
Remote control receiver
20° vertical range
30° horizontal range
Remote control 
transmitter
Up to 23 (7 m) 

18
Paper and Ink Cassettes (Sold Separately)
•  Starter kit is included (5 sheets of postcard size paper).
Use only paper and ink cassettes in the Paper and Ink set described below.
Do not use postcard and ink jet type paper.
(This will cause paper jams and the printer to malfunction.)
•  Protective coating is applied to the images that printed using paper and ink in the Paper and 
Ink set, so that print quality can be maintained over an extended period of time.
•  Ensure that only the ink cassette and...

Preparation
19
Note
•  When cutting paper after printing, fold the 
paper along the perforated line. Then reverse 
the fold in the opposite direction and cut the 
paper along the folded line.
•  If you are printing on the reverse side of a 
sheet with a different printer, the ink may take 
some time to dry.
Handling of paper and ink cassettes
 During printing
•  Do not open the ink cassette compartment cover, as print quality may be reduced.
•  Do not remove the paper cassette or ink cassette.
•  Do not...

20
Inserting the Paper
For details on paper, refer to page 18.
  Open the paper cassette lid.
Ta b
•  Push in the 
direction of the 
arrow.
•  If the lid does not open, slide the 
lid until “
” and “ ” marks align 
(until you hear the lid catch in 
place).
Slide the lid to align 
“ ” and “ ” marks.Click
  Insert paper in the paper cassette.
1
Fan the paper to avoid 
multi-sheet feeds.
Place the paper in the 
paper cassette without 
removing protective sheet 
so as not to touch the print 
surface.
•  The...