Home
>
Panasonic
>
Wireless Network
>
Panasonic Home Network System HUB Kx Hnb600 System Setup Guide
Panasonic Home Network System HUB Kx Hnb600 System Setup Guide
Here you can view all the pages of manual Panasonic Home Network System HUB Kx Hnb600 System Setup Guide . The Panasonic manuals for Wireless Network are available online for free. You can easily download all the documents as PDF.
Page 1
System Setup GuideHome Network SystemHUBModel No. KX-HNB600 Thank you for purchasing a Panasonic product. This document explains how to configure the hub and access it using a mobile device. These steps must be followed before you can use the system. For details about how to use the system, refer to the User’s Guide (page 15). Please read this document before using the unit and save it for future reference. For assistance, visit our Web site: www.panasonic.com/support for customers in the U.S.A. or...
Page 2
Introduction Accessory information ..................................3 Important Information About this system ......................................... 6 For your safety ............................................. 6 Important safety instructions ........................7 Security cautions .......................................... 7 For best performance ...................................8 Other information ......................................... 8 Setup Part names and functions...
Page 3
Accessory information Supplied accessories No.Accessory item/Part numberQuantityAAC adaptor/PNLV2360Z1BTelephone line cord/PQJA10075Z1CWall mounting adaptor/PNKL1049Z11ABC Additional accessories microSD card (not supplied) A commercially-available microSD card must be inserted into the hub in order to record images from cameras. The following types of microSD cards are supported. R microSD / SDHC card: Up to 32 GB Note: R Please contact your nearest Panasonic dealer for sales information (page 21)....
Page 4
Expanding the Panasonic Home Network System The Panasonic Home Network System lets you create a powerful wireless network of cameras, sensors, and smart plugs in your home, and control them all with an easy-to-use mobile app. Compatible devices are explained below. For information about the Home Network app, refer to the User’s Guide (page 15). The maximum number of devices for each device type is listed below.Digital Cordless Handset (KX-HNH100: 6 max.) *1 R Makes and receives calls using your home...
Page 5
Smart Plug (KX-HNA101: 50 max.*3 ) R Can be turned on and off using the handset or Home Network app or when triggered by a sensor R Built-in overcurrent detection for added peace of mind R Power consumption is logged for your reference *1 Optional handsets may be a different color from that of the handset supplied as part of a pre-configured kit. *2 A total of 4 cameras (including indoor cameras and outdoor cameras) can be registered to the hub. *3 A total of 50 sensors (including motion sensors and...
Page 6
About this system This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload...
Page 7
equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install wiring during a lightning storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure...
Page 8
in the product. Remove and erase the microSD card. R If your mobile device will no longer be used with the product, delete your mobile device’s registration from the product and delete the corresponding app from your mobile device. R If this product experiences a power outage, its date and time setting may become incorrect. In this case, the date and time setting will be automatically corrected when your mobile device and this product are connected to the same wireless network. Additionally, note the...
Page 9
reading or writing data to the microSD card. Data on the card could become corrupted. R If a microSD card malfunctions or is exposed to electromagnetic waves or static electricity, data on the card could become corrupted or erased. Therefore we recommend backing up important data to a computer or other device. Notice for product disposal, transfer, or return R This product can store your private/ confidential information. To protect your privacy/confidentiality, we recommend that you erase information...
Page 10
Part names and functions SpeakerLED indicatorDC jackLINE jackMWi-Fi SETUP N Used when performing initial setup. microSD card slot Used when inserting a microSD card. Remove the label when inserting. M HANDSET/LOCATOR N Used when registering a handset. You can also press this button to locate a misplaced handset. M CAMERA N Used when registering a camera. M OTHER DEVICE N Used when registering a sensor or smart plug. LED indicator You can use the LED indicator to confirm the hub’s status....