Panasonic Es Lt71_mul_om Operating Instruction Manual

Operating Instructions
(Household) Rechargeable Shaver
Model No. ES‑LT71
Before operating this unit, please read these instructions completely and save them for future use. 


Thank you for choosing a Panasonic shaver. With our WET/
DRY technology, you can enjoy using your Panasonic 
shaver dry or in the shower or bath for gentle and easy 
shaving. Please read all instructions before use.
Important
This shaver has a built‑in rechargeable battery. Do not throw into 
fire, apply heat, or charge, use, or leave in a high temperature 
environment.Before use
This WET/DRY shaver can be used for wet shaving with shaving 
lather or for dry shaving. You can use this watertight...


Storing the shaverStore the shaver in a place with low humidity after use.
Do not store the shaver where it will be exposed to direct 
sunlight or other heat sources.
Disconnect the power cord when storing the shaver.
Do not bend the power cord or wrap it around the shaver.
Keep the oil away from children.
Self-cleaning recharger Do not clean the AC adaptor or the self
 ‑cleaning recharger in 
water as it will damage them or cause an electric shock.
Do not remov
 e the shaver from the self‑cleaning...


Parts identification




 








 








A  Protective cap
B  Outer foil section
1
 Foil frame
2  System outer foil
3  System outer foil release 
b
uttons
C  Inner blades
D
  Main body 4 
Foil frame release buttons
5
  Pivot action selector
6  Lock ring
7  Battery capacity lamp
8  Charge status lamp ()
9  Appliance sock et
:  Power switch [0/1]
;  Finger rest < 
Trimmer
=
  Trimmer handle
E
  Self‑ cleaning recharger
>  Water tank cap
?  Water tank
@  Socket
A...

5
Charge
Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the self‑
cleaning recharger so that it is dry before charging the shaver.
1
1Insert the appliance plug 
into the self-cleaning 
recharger.
2
2Remove the protective 
cap and then attach the 
shaver.
3
3Plug in the AC adaptor.
1 3
2
The “Charge” course starts when attaching the shaver.
Turn the shaver off before attaching.
Check that the outer foil is not deformed or damaged when you 
are attaching the...

6
Shave
Using the shaver
1
1Rotate the lock 
ring and press the 
power switch. 
Page 4
2
2Hold the shaver as 
illustrated above and 
shave.
We recommend using the shaver in an ambient temperature 
range of 5 ‑ 5 °C. If used outside this range, the appliance may 
stop operating.
Start out shaving by applying gentle pressure to your face. Stretch 
your skin with your free hand and move the shaver back and forth 
in the direction of your beard. You may gently increase the amount 
of pressure as your...

7
Care
Cleaning with the self-cleaning recharger
Preparing the self-cleaning rechargerRemove the shaver and the appliance plug from the self‑cleaning 
recharger.
1
1Remove the water 
tank and then open 
the water tank cap.
2
2Wash away the old 
cleaning liquid and 
then rinse the water 
tank.


2
1
3
3Pour tap water into 
the water tank.
Do not let the water rise above 
the maximum water line. This 
may cause the cleaning liquid 
to spill.
•
4
4Securely close the water tank cap and then 
attach the...


Cleaning the shaver
Use the self‑cleaning recharger in temperatures between 15 °C 
and 5 °C.
1
1Insert the appliance plug 
into the self-cleaning 
recharger.
2
2Remove the protective 
cap and then attach the 
shaver.
3
3Plug in the AC adaptor. 
Remove any soap or water on the 
shaver if it has been washed with 
hand soap or any other detergent.
Turn the shaver off before attaching.
Check that the outer foil is not 
deformed or damaged when you 
are attaching the shaver.
•
•
•1
3
2
4
4Press the...

9
Follow the steps outlined below if the status 
lamp blinks or glows
BlinksGlows
Correctly set the 
detergent cartridge and 
then restart a course. Remo
v
 e the shaver from the self‑
cleaning recharger and then 
check that the [CLEAN] lamp has 
gone out. (Be careful as the blade 
may be hot or wet.) Check that 
the water tank is correctly 
attached, the water tank cap is 
securely closed and the self‑
cleaning recharger is placed 
hor

izontally.
If the status lamp goes 
out
Continue a course.
When an...

10
Lubrication
To maintain shaving comfort for a long time, it is recommended 
that the oil provided with the shaver is used.
1. Switch off the shav
er.
.  Apply one drop of oil to each of the outer foils.
.  Raise the trimmer and apply a drop of oil.
.  Switch the shaver on, and run it for approximately 
five seconds.
5.  Switch off the sha v

er, and wipe off any excess oil 
from the outer foils with a soft cloth.
2
3
It is not necessary to oil the blades after cleaning the shaver with...