Panasonic DP 8020P User Manual

							41
Making Copies
or
34
EFFECTS         (1-2)
ENTER NO. OR ∨ 
^
or
1:CENTERING?
PRESS SET TO SELECT
2:IMAGE REPEAT?
PRESS SET TO SELECT
5
PAPER TRAY
TRAY-1             ∨ 
^
TRAY-1
TRAY-2
TRAY-3
TRAY-4
BYPASS
: Centering
: Image Repeat
Exits this
mode.
7
NOTE: Tray-2, 3 and 4 are
options. (See page 69)
6
Downloaded From ManualsPrinter.com Manuals 
						

							42
Making Copies
■ Sort
Sort
Multiple copy sets are sorted automatically.
2
Lights
Sort mode is
selected.
5
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
Go to next step
12
312
312
3
NOTE
Initial Sort Mode settings can be selected
within the Copier Settings, Parameter No. 10
(SORT PRIORITY ADF) or Parameter No.
11  (SORT PRIOR. GLASS). (See pages 57
and 58)
Initial Sort Priority Setting:
For ADF: 2:Sort; For Platen: 1:Non-Sort
6
Non-Sort
Copy is stored on the Output Tray.
1
or
For ADF
For i-ADF
Steps 5 to 8 from Platen only
NOTE
If “2: NO” is selected, the
machine will start copying
one side of the original(s).
Rotate-Sort
Multiple copy sets are sorted automatically and
are stored on the Output Tray in alternate
direction (rotate). Initial Sort-Rotate Mode is
“1:OFF”, this setting can be selected within the
Copiers General Settings. (See page 54)
1 2
312
3
1
2
3
(Available Letter size paper only)
Next Original
Creative Features
Downloaded From ManualsPrinter.com Manuals 
						

							43
Making Copies
Number of
Copies
(Max. 999)
4
7
From Platen only
3
LTR: Letter-R
INV
:  Invoice-R
INV
:  Invoice
LGL
:
 Legal
LTR: Letter
LDR: Ledger
~58
From Platen
only
PRESS START TO
CONTINUE
8
ANOTHER ORIGINAL?
1:YES 2:NO
:NO
Starts making copies.
:YES
Continues to copy another
original, repeat steps 1 and 4- 
 2
to step 7.
Downloaded From ManualsPrinter.com Manuals 
						

							44
Making Copies
Other Features
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even\
 if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) i\
n advance.
■  Digital Skyshot Mode
The default setting of Digital Skyshot Mode is “NORMAL”. This
default setting can be changed in the Copier Settings.
(See page 57)1
Open the ADF more
than 45 degrees
wide.
From Platen
Upper-
Left
Corner
1
■  Manual Skyshot Mode
Enable the Copier Settings, Parameter No. 08 (MANUAL
SKYSHOT) first. (See page 57)
NOTE
● Other jobs requiring memory cannot be performed, while M1 and
M2 buttons are being used for the Skyshot mode.
NOTE
The default setting of Digital Skyshot Mode is “NORMAL”. In this
setting, the unit scans once. If there are black areas around the
borders in the copies, set the Digital Skyshot Mode to “QUALITY”
to soften the dark borders. In this setting, the unit scans twice.
OFF :NONE
NORMAL :Default setting (usually select this mode).
QUALITY :For better definition, select the Quality mode.
● The final copy may be affected if colored background original(s)
do not have a white edge or if it is less than 2 mm wide.
The default setting of Digital Skyshot Mode should be set to
“OFF” in the Copier Settings, Parameter No. 07 (DIGITAL
SKYSHOT).
Downloaded From ManualsPrinter.com Manuals 
						

							45
Making Copies
LTR: Letter-R
INV
:  Invoice-R
INV
:  Invoice
LGL
:
 Legal
LTR: Letter
LDR: Ledger
2
NOTE
● An incorrect position detection of the original may occur when
a strong light shines onto the glass during digital skyshot mode.
● An incorrect exposure may occur when there is a black line at
the edge of the original or an image which the machine
interprets as a black pattern in the digital skyshot mode.
Number of
Copies
(Max. 999)
3
2
Custom size ∗
or
∗Default M1/M2 size can be
changed by Function mode.
(See page 58)Number of
Copies
(Max. 999)
3
Downloaded From ManualsPrinter.com Manuals 
						

							46
Making Copies
Other Features
■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF  Mode.
NOTE: Set the Copier Settings, Parameter No.
12 (SADF DEFAULT) to “OFF” position
in advance. (See page 59)
Thin paper: minimum 15 lb (55  g/m
2)
21For ADF
For i-ADF
Select desired
settings
Example:To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
1For ADF
For i-ADF
Place the first 50
sheets of originals
on the ADF Tray.
50
80
1
51 80
1
Originals: 50 sheets 

Originals: Remaining 
30 sheets 
1
st and 2nd Scanned Data
are combined into one job.
5 sets of 80 sheets sorted copies are  printed 
NOTE●Job Build and SADF function cannot be combined with 2  1 and 2  2.
● Concurrent Copying function cannot be used when the Job Build and SADF f\
unction are set to
the “ON” position in the Copier Settings, Parameter No. 12 (SADF \
DEFAULT). (See page 59)
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 69) to be installed)1For ADF
For i-ADF
1st job1st job
2nd job
Reserve
Copy
2nd job
or
2
Select desired
settings
2
Select desired
settings
Downloaded From ManualsPrinter.com Manuals 
						

							47
Making Copies
Number of Copies
(Max. 999)
34For ADF
For i-ADFPlace the next
original within 5
sec. of last ejected
original.
Number of
Copies
(Max. 999)
(ex. 5)
45For ADF
For i-ADFPlace the next
original within 5
sec. of last
ejected original.
(30 sheets)3
Lights
Sort mode is
selected.
Select the Sort mode
Starts the printing
process.
Starts the printing process.
(ex. 5 sets of 80 sheet sorted
copies)
Number of
Copies
(Max. 999)
345
When starting the printing
process:
Set the next copy job, repeat
steps 1 to 3.
Next original(s) will be scanned.
● Next Jobs can be reserved
(up to 12 jobs). When the 1st copy job
is completed, next
original(s) will be
automatically printed.
Starts making a copy
Downloaded From ManualsPrinter.com Manuals 
						

							48
Making Copies
or
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
To enter
To  exit
Other Features
or Automatically enters
the Power Saver
Mode after 10
minutes from
the last job.
∗
Automatically enters the Sleep/
Shutdown Mode after 10 minutes
from the last job. ∗
NOTE
∗To  adjust the default Sleep/
Shutdown Mode timer, see
page 54.
■  Interrupt Mode
This mode interrupts the
current running copy job and
allows other copy jobs to be
processed. Other Job12
Power Saver Mode
Sleep/Shutdown Mode
Flashes :
Power Saver
Mode
To
 exit
Lights :
Sleep/Shutdown
Mode
■ Job Memory
Two Copy Jobs can be stored in Memory
(M1 to M2) for recall at a later time.To  store a job in memory
21
NOTE●JOB MEMORY mode will not be deleted even if the power switch is turned Off.
● When using the manual skyshot mode, the M1 and/or M2 are turned On and o\
ther job requiring
memory cannot be used.
Set up the copy
job to be stored.
(See pages 24-43) or
For ADF
For i-ADF
or Any  Key
(See pages 24-43)
Downloaded From ManualsPrinter.com Manuals 
						

							49
Making Copies
Modes Power Consumption Warm Up Time Unavailable Functions
Standby Approx. 120 W — ————————
Power Saver Approx. 19.5 W Approx. 30 sec. ————————
Sleep Approx. 8.5 W Approx. 30 sec. ————————Shutdown Approx. 1.6 W Approx. 30 sec. • Printer Function (Local USB and Network Connection)
• Internet Fax/Email Function
• Facsimile Function
(If the LAN Cable is not connected, and the DHCP
DEFAULT is set to VALID, while in this mode
(Shutdown),  the machine will not answer an
incoming Fax call) (See page 55)
34
Other Job is
completed
56
To  recall a job stored in memory
or
12
or
Number of
Copies
(Max. 999)
3
When the original size is not shown on the
LCD display after selected M1 or M2, select
original size with the Original Size Key.
Downloaded From ManualsPrinter.com Manuals 
						

							50
Making Copies
■ Completion Notice
If Completion Notice is set, you will be
notified on your computer when
copying is completed.
Before using this function, install the
Panasonic Document Management
System (Communications Utility),
and the  Printer Driver (with Job
Status Utility)  on your computer, and
then configure each software referring
to  Setting up the Scanner
Configuration using the
Communications Utility , and Setting
up the Completion Notice.  (See
Page 72)
ABBR
ABBR [_   ]
ENTER ABBR No.
Select a Station (PCs Address)
4-1
DIRECTORY
SEARCH
ENTER LETTER(S)
_
4-1
ONE-TOUCH
4-1
Keyboard (Option)
Other Features
Communications Utility
Icon
Job Status Utility Icon
Confirm that the  Communications Utility , and the Job Status
Utility  icons are displayed on the task bar of your PC.
● If they are not, click  Start button, and then
select  [All Programs]  -> [Panasonic]  -> [Panasonic
Document Management System]
->   Communications Utility  to activate the Communications
Utility icon, and/or select  [All Programs] -> [Panasonic]  -> [Job
Status Utility]  -> [Job Status Utility]  to activate the Job Status
Utility icon.
1
PANA
10.74.252.63
NOTE● ONE-TOUCH  is available when the  optional Keyboard (DA-KB180) is installe\
d.
● This Completion Notice is available only when connected to the Network.
To reset the Completion Notice, press COPY key and FUNCTION key simultaneously.
Downloaded From ManualsPrinter.com Manuals