Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U Operating Instructions

							ENGLISH - 21
Basic Operation
Remote control operation
You can operate the projector with the remote control within the 
remote range 30 m (985), approximately ± 30° horizontally 
and ± 15° vertically.
Facing to the projector
Ensure the remote control emitter is facing to the remote 
control signal receptor on front/back of the projector and 
press the required buttons to operate.
Facing to the screen
Ensure the remote control emitter is facing to the screen 
and press the required buttons to operate the projector. 
The signal will be reflected off the screen. The operating 
range may differ due to the screen material. This 
function may not be effective with a translucent screen.
The automatic setup function can be used to automatically adjust the resolution, clock phase and picture position when 
analogue RGB signals consisting of bitmap images such as computer signals are being input, or to automatically adjust 
the picture position when DVI-D signals are being input.
1. Input an analogue RGB image signal.
2. Press the AUTO SETUP button.
3. Displays a message “PROGRESS”.
4. Displays a message “COMPLETE” when ended.
When the performance is not completed and ended, displays “INCOMPLETE”.
Shutter button
Auto setup button
Aspect button Function button Status button On screen button Input select buttons
Test pattern button
Operating range
NOTE:
• Do not let strong light shine onto the signal receptor. The 
remote control may malfunction under strong light such as 
fluorescent.
• If there are any obstacles between the remote control and the 
remote control signal receptor, the remote control may not 
operate correctly.
Setting up the image position automatically
NOTE:
• The automatic setup function does not work with video format signals such as signals output from a DVD player.
• It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc. that are clear in white 
and black contrast when the system is in automatic adjustment mode.
• Avoid supplying images that involve halftones or gradation such as photographs and computer graphics.
• The clock phase adjustment may have been shifted even when the adjustment ended normally. In this case, manually adjust CLOCK 
PHASE in POSITION menu.
• If an image with blurred edges or a dark image is input, “INCOMPLETE” may appear or adjustment may not be performed properly even 
if “COMPLETE” appears. In this case, manually adjust INPUT RESOLUTION in ADVANCED MENU, CLOCK PHASE and SHIFT in 
POSITION menu.
• For specific signals and landscape signals such as 16:9, see AUTO SETUP in DISPLAY OPTION menu of the functional instructions 
that is in the provided CD-ROM.
• Automatic adjustment may not be available depending on the machine type of the computer.
• Automatic adjustment may not be available for synchronisation signal of C-SYNC and G-SYNC.
• Image may be distorted for several seconds during automatic adjustment. This is not a malfunction.
• For every supplied signal, adjustment is required.
• Automatic adjustment can be cancelled by pressing the MENU button during the course of automatic adjustment.
• Even for an RGB signal for which automatic setup is possible, if automatic setup is performed while moving images are being input, 
“INCOMPLETE” may appear, or adjustment may not be performed properly even if “COMPLETE” appears. 
						

							Basic Operation
Remote control operation
ENGLISH - 22
You can use the remote control to switch 
the signals that are being input and 
projected.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is 
available that allows the user to hide images temporarily.
Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.
Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.
Press the ON SCREEN button again to displays
You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the 
ASPECT button is pressed.
Appearance sample
S-VIDEO signal
VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO
The projector has 7 types of internal test patterns to check the condition of the set.
1. Display an input signal image.
2. Press the TEST PATTERN button.
3. Press I H to select the required test pattern.
Switching the input signal
RGB1Switches to RGB 1 IN.
RGB2Switches to RGB 2 IN.
DVI-DSwitches to DVI-D IN.
VIDEOSwitches to VIDEO IN.
S-VIDEOSwitches to S-VIDEO IN.
SDI*1
*1.SDI is only for PT-DZ6710U.
Switches to SDI IN.
Stopping the projection
Clearing the on-screen menu
Changing the picture aspect ratio
NOTE:
• The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is 
in the provided CD-ROM.
Displaying the internal test pattern
NOTE:
• See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM. 
						

							Basic Operation
Remote control operation
ENGLISH - 23
You can assign a selected function to the FUNCTION button. Following functions are assignable.
Pressing this button displays several pages of projector status information.
If an adjustment item is selected and press the DEFAULT button, the adjustment value will return to the factory default 
setting.
Using an assigned function
OptionsFunctions
DISABLEDeactivate the FUNCTION button.
SUB MEMORY LISTDisplay the assigned SUB MEMORY LIST.
SYSTEM SELECTORSwitches the SYSTEM SELECTOR options.
SYSTEM DAYLIGHT 
VIEWSwitches the SYSTEM DAYLIGHT VIEW 
setting.
FREEZEFreezes the image.
SIDE BY SIDEStart the SIDE BY SIDE mode.NOTE:
• See FUNCTION in PROJECTOR SETUP menu and each 
corresponding menu items of the functional instructions that is 
in the provided CD-ROM.
Displaying the status of the projector
NOTE:
•See STATUS in PROJECTOR SETUP menu and “Accessing with the web browser” in Technical Information of the functional instructions 
that is in the provided CD-ROM.
Resetting to the factory default 
						

							ENGLISH - 24
Basic Operation
Menu Navigation
The menu options are structured and categorized. You can 
navigate through the menu with F G I H buttons. See 
“Navigating through the menu” on page 27.
Some default settings vary by the selected input signal.
Sub-menu items vary according to the selected input signal.
Some settings are adjustable without any signals.
See the functional indications in the CD-ROM that is 
provided with the projector.
 PICTURE
 POSITION ADVANCED MENU
 DISPLAY LANGUAGE
Main menu and Sub-menu
PICTURE MODE
STANDARD CINEMA
NATURAL DYNAMIC
GRAPHIC
CONTRAST
(Default: 0)
BRIGHTNESS
(Default: 0)
COLOR
(Default: 0)
TINT
(Default: 0)
COLOR TEMPERATURE
DEFAULT USER
MIDDLE HIGH
WHITE GAIN
(Default: 10)
SYSTEM DAYLIGHT VIEW
OFF 1
23
SHARPNESS
(Default: 6)
NOISE REDUCTION
12
3OFF
AI
ON OFF
SYSTEM SELECTOR
AUTO NTSC NTSC 4.43 PAL
PAL-M PAL-N SECAM PAL60
RGB YC
BCRVGA60 480p
480pRGB YP
BPR108060i 103560i
72060p 108024p 108050i 108030p
108025p 108024sF 72050p 480i
576i
SHIFT
ASPECT
DEFAULT VID AUTO S1 AUTO
VID AUTO(PRI.) THROUGH
16:9 4:3 H-FIT
V-FIT HV-FIT
ZOOM
INTERNAL FULL
CLOCK PHASE
(Default: 16)
GEOMETRY
(PT-DZ6710U only)
OFF KEYSTONE
CURVED PC
GEOMETRY:KEYSTONE
VERTICAL KEYSTONE
VERTICAL SUB KEYSTONE
HORIZONTAL KEYSTONE
HORIZONTAL SUB KEYSTONE
LINEARITY
GEOMETRY:CURVED
LENS THROW RATIO
VERTICAL KEYSTONE
HORIZONTAL KEYSTONE
VERTICAL ARC
HORIZONTAL ARC
VERTICAL BALANCE
HORIZONTAL BALANCE
KEYSTONE
(PT-DZ6700U/PT-DW6300U/PT-D6000U 
only)
VERTICAL KEYSTONE
VERTICAL SUB KEYSTONE
LINEARITY
DIGITAL CINEMA REALITY
AUTO OFF
25p FIXED 30p FIXED
BLANKING
UPPER LOWER
LEFT RIGHT
INPUT RESOLUTION
TOTAL DOTS  DISPLAY DOTS
TOTAL LINES DISPLAY LINES
CLAMP POSITION
EDGE BLENDING *
OFF ON
GAMMA
2.2 1.8 2
BRIGHT ADJUST
BRIGHT INSIDE BRIGHT OUTSIDE
OUTSIDE AREA
RASTER POSITION
VERTICAL HORIZONTAL 
						

							Menu Navigation
ENGLISH - 25
Basic Operation
 DISPLAY OPTION
 PROJECTOR SETUP TEST PATTERN
 SIGNAL LIST
COLOR MATCHING *
OFF 3 COLORS
7 COLORS MEASURED
COLOR CORRECTION
OFF USER
CONTRAST MODE *
NORMAL HIGH
SCREEN SETTING
SCREEN FORMAT
16:10 16:9 4:3
SCREEN POSITION
AUTO SIGNAL
ON OFF
AUTO SETUP
DEFAULT WIDE
USER
DVI-D IN
DVI EDID
EDID3 EDID1 EDID2(PC)
DVI SIGNAL LEVEL
0-255:PC 16-235
SDI IN
(PT-DZ6710U only)
64-940 4-1019
ON-SCREEN DISPLAY
OSD POSITION
123
456
789
OSD DESIGN
123
456
OSD MEMORY
ON OFF
INPUT GUIDE
ON OFF
WARNING MESSAGE
ON OFF
BACK COLOR
BLACK BLUE
LOGO1 LOGO2
STARTUP LOGO
LOGO2 NONE
LOGO1
FREEZE
SIDE BY SIDE
(PT-DZ6710U/PT-DZ6700U/PT-DW6300U only)
VIDEO S-VIDEO
RGB1 RGB2
DVI-D SDI
OFF
PROJECTOR ID
ALL 1 - 64
INSTALLATION
FRONT/FLOOR FRONT/CEILING
REAR/FLOOR REAR/CEILING
HIGH ALTITUDE MODE
OFF ON
COOLING CONDITION
FLOOR SETTING
VERTICAL DOWN SETTING
CEILING SETTING
VERTICAL UP SETTING
LAMP SELECT
DUAL SINGLE
LAMP1 LAMP2
LAMP RELAY
OFF 00:00 - 23:00
LAMP POWER *
HIGH LOW
STANDBY MODE
NORMAL ECO
RS-232C
(IN) BAUDRATE
(IN) PARITY
(OUT) BAUDRATE
(OUT) PARITY
RESPONSE(ID ALL)
GROUP
RESPONSE(ID GROUP)
REMOTE2 MODE
DEFAULT USER
STATUS
FILTER COUNTER RESET
NO SIGNAL SHUT-OFF
DISABLE
10 MIN. 20 MIN. 30 MIN. 40 MIN.
50 MIN. 60 MIN. 70 MIN. 80 MIN. 90 MIN.
FUNCTION BUTTON
DISABLE
SUB MEMORY LIST
SYSTEM SELECTOR
SYSTEM DAYLIGHT VIEW
FREEZE
SIDE BY SIDE
DAY AND TIME
TIME ZONE ADJUST CLOCK
SAVE ALL USER DATA
LOAD ALL USER DATA
INITIALIZE
SERVICE PASSWORD
TEST PATTERN
REGISTERED SIGNAL STATUS
SUB MEMORY LIST
* Not available for PT-D5000U. 
						

							Basic Operation
Menu Navigation
ENGLISH - 26
 SECURITY  NETWORK
SECURITY PASSWORD
OFF ON
SECURITY PASSWORD CHANGE
DISPLAY SETTING
OFF TEXT
LOGO1 LOGO2
TEXT CHANGE
MENU LOCK
OFF ON
MENU LOCK PASSWORD
CONTROL DEVICE SETUP
CONTROL PANEL
ENABLE DISABLE
REMOTE CONTROLLER
ENABLE DISABLE
NETWORK SETUP
HOST NAME DHCP
IP ADDRESS SUBNET MASK
DEFAULT GATEWAY STORE
NETWORK CONTROL
WEB CONTROL
PJLink CONTROL
COMMAND CONTROL
COMMAND PORT
STORE
NETWORK STATUS
DHCP IP ADDRESS
SUBNET MASK DEFAULT GATEWAY
DNS1 DNS2
MAC ADDRESS 
						

							Menu Navigation
ENGLISH - 27
Basic Operation
Displaying the Main menu
Press the MENU button to display the main menu.
Adjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current 
setting.
Returning to the previous menu
Press the MENU button to return to the previous menu. Press 
repeatedly to escape from the menu mode and return to the 
projection.
Operating procedure
1. Press F G to scroll to the required main menu item and 
press the ENTER button to select.
The selected item is highlighted in orange and the sub-
menu is displayed. 
See “Main menu and Sub-menu” on page 24.
2. Press F G to scroll to the required sub-menu item and 
press I H or the ENTER button to adjust.
The selected item is called up and the other menu items 
disappear from the screen. Called up item will be disappear 
after 5 seconds and return to the menu mode.
If there is a lower level, the next level will be displayed.
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are 
displayed on the left of the bar scale.
You can cycle through the options of an item by pressing I 
H.
4. Press the MENU button to return to the previous menu.
Navigating through the menu
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
0CONTRAST
ADJUST
Current setting
Default
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
0
ENTER
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
GEOMETRY
MENU SELECT
CHANGEAUTO
KEYSTONE
0CONTRAST
ADJUST 
						

							ENGLISH - 28
Maintenance
Monitor Lamp indicators
If a problem should occur with the projector, the indicators will inform you. Manage the indicated problems as follow.
1. Confirm the status of all indicators and projector, and switch off the projector in proper way.
2. Find out the cause of the problem by status of each indicator.
3. Follow the instruction for each indication below and solve the problem.
4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.
LAMP1/LAMP2 indicator
TEMP indicator
Managing the indicated problems
NOTE:
• If no problem is found or the problem remains, do not turn on the projector. Instead contact your nearest dealer.
Lamp 
indicationInformationCheck pointRemedial measure
Lighting in redIndicates the time for 
replacing the lamp unit• Did you notice a “REPLACE 
LAMP” message on the screen 
when turning on the projector 
power supply?• This lamp monitor lights up when the lamp 
unit used hours have reached 1  800*  hours. 
Request the dealer to replace the lamp unit.
* 2 800 hours for PT-D5000U only.
Blinking in red 
onceLamp unit is not installed.• Check the lamp unit 
compartment.• Install the lamp unit.
• When lamp unit is installed and still having 
the indicator lights, contact to the dealer.
Blinking in red 
3 timesError is detected in the 
lamp circuit.• Did you turn the power back on 
immediately after turning it off?• Wait until the lamp has cooled off, and then 
turn on the power.
• Some error has arisen in the 
lamp circuit.
• Check for fluctuation (or drop) in 
the source voltage.• Turn off the POWER switch of the projector 
properly and contact your nearest dealer.
Lamp 
indicationInformationCheck pointRemedial measure
Lighting in redWarm-up status• Did you turn on the power when 
the ambient temperature was 
lower than approx. 0 °C (32 °F)?• Wait about 5 minutes in the current status.
• Install the unit in a location having an 
ambient temperature from 0 °C (32 °F) - 
45 °C (113 °F).
High temperature inside. 
(WARNING)• Check the ventilation port is 
blocked.
• Is the room air temperature too 
high?
• Was the temperature warning 
indication displayed?• Remove the object that is blocking the 
ventilation port.
• Move the projector to a temperature of 0 °C 
(32 °F) - 45 °C (113 °F) and the humidity of 
20 % to 80 % (no condensation).
• Turn off the POWER switch of the projector 
in proper way and contact the dealer. Blinking in red 
onceThe filter is excessively 
dirty and the ventilation is 
poor.
Blinking in red 
twiceHigh temperature inside. 
(Standby condition)
Blinking in red 
3 timesCooling fan has been 
stopped.• Turn off the POWER switch of the projector 
in proper way and contact the dealer.
STANDBY(RED)/STANDBY(RED)/   ON(GREEN)   ON(GREEN)LAMPLAMPTEMPTEMPFILTERFILTER
STANDBY(RED)/STANDBY(RED)/   ON(GREEN)   ON(GREEN)LAMPLAMPTEMPTEMPFILTERFILTER
Indicators
Power indicator
Lamp1 (LAMP1) indicator
Lamp2 (LAMP2) indicator
Temperature (TEMP) indicator
Filter (FILTER) indicator 
						

							Monitor Lamp indicators
ENGLISH - 29
Maintenance
FILTER indicator
The FILTER indicates the Auto Cleaning Filter (ACF) unit status.
Lamp 
indicationInformationCheck pointRemedial measure
Lighting in red The ACF unit has run out.• Check the REMAINING FILTER 
of STATUS in PROJECTOR 
SETUP menu.• Replace the ACF unit.
Blinking in redThe ACF unit is not 
installed.
*1
*1. When the ACF unit is not installed, the filter indicator will blink in red and the power will turn off.
• Check the ACF unit 
compartment.• Replace the ACF unit.
Lighting in 
orangeThe ACF unit remains 
few. The remaining use 
time of the ACF unit is 
approximately 
200 hours.
*2
*2. 200 hours is the roughly guided time.
• Check the REMAINING FILTER 
of STATUS in PROJECTOR 
SETUP menu.• Request the dealer to purchase the new 
ACF unit.
Blinking in 
orangeThe ACF unit cannot 
operate properly.• Is foreign object blocking the 
ACF unit operation?• Remove the foreign object from the ACF 
unit.
• When the foreign object still remained, 
contact the dealer.
NOTE:
• When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.
• When the ACF unit is operating, operational sound may be heard.
• In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.
• If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP 
menu is OFF, it may cause malfunction of the ACF unit.
• Before the FILTER indicator blinks in orange when operational malfunction, mechanical sound of the clutch may be heard. 
						

							ENGLISH - 30
Maintenance
Replacement
Before replacing the Lamp unit
Turn off the POWER switch of the projector in proper way and disconnect the power plug from the wall outlet.
Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.
Prepare a Phillips-head screwdriver.
Contact the dealer to purchase a replacement lamp unit (ET-LAD60:1 bulb unit, ET-LAD60W: 2 bulb units).
When the projector is mounted on the ceiling, do not work directly under the projector or put your face 
closer to the projector.
When to replace the lamp unit
The lamp unit is consumable and the brightness decreases by duration of usage. The LAMP1/LAMP2 
indicators will inform you of the replacement timing at 1 800
*2 hours, and at 2 000*1 hours, the projector will be 
turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics 
of the lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP1
/
LAMP2 of STATUS in the PROJECTOR SETUP menu.
*1. 3 000 hours for PT-D5000U.
*2. 2 800 hours for PT-D5000U.
Replacing the Lamp unit
CAUTION:
• The lamp may explode by shocks or chipping damage.
NOTE:
• Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.
• Do not attempt replacement with an unauthorized lamp unit.
• Both lamps must be set in a lamp unit. If only one lamp is set, the power will not work.
IndicationOn screenLAMP indicator
Over 1 800*2 hours“REPLACE LAMP” is displayed on the upper left 
of the screen for 30 seconds. Press any button to 
clear the screen, or disappears after 30 seconds.
Lights in red
Over 2 000*1 hours“REPLACE LAMP” is displayed on the upper left 
of the screen, and it will stay until you respond.
To clear the screen, press any button.
CAUTION:
• If you keep using the lamp unit after 2 000*1 hours, it cause the damage of the projector. Automatically the projector will be powered off 
after 10 minutes.
NOTE:
• The guide times, 1 800*2 and 2 000*1 hours, are rough estimates based on certain conditions and are not a guaranteed time.
• For more information about the lamp unit, see the instructions which is provided with the lamp unit.
REPLACE LAMP
LAMPLAMP