Panasonic CD Stereo System Sc Pmx9 Wifi Connection Guide

							y            y
CD Stereo System
Model No. SC-PMX9
You can wirelessly stream music from an iOS device, an AndroidTM device or a 
Mac/PC to SC-PMX9’s speakers. To use this music-streaming feature, 
SC-PMX9 must join the same 2.4 GHz wire less network as the compatible device 
through the wireless network router (access point).
≥For information on how to connect with a LAN cable,  refer to “Wired LAN connection” in the Owners Manual.
*1: Refer to the Operating Instructions for the compatibility.
Screen images used in this sheet : iPhone 4S, iOS 6.0.1
Wi-Fi® connection guide
iOS device*1, Android device 
or Mac/PC Wireless network 
router SC-PMX9
VQC9787
YesNo / Do not know
No
Ye s
Start wireless network settings
Preparation
1 Place SC-PMX9 close to the wireless network router as 
possible and then point the antenna on the rear of the main 
unit up as shown in the figure.
≥Do not tilting the antenna forward or backwards when it is pointing up.
2 Connect the AC power supply cord while the LAN cable is disconnected.
3Turn this system on.
4 Follow the chart below to choose the network setting method.
≥If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced 
setting, refer to
 “Method 4” in the Owners Manual.
You can make the wireless network 
settings with the app, “Panasonic 
Stereo System Network Setup” (for 
free).
If you’re using an Android device, 
download the app at Google Play
TM. If 
you’re using an iPod touch/iPhone/
iPad, download it at the App Store.
Preparation
≥ Connect your smartphone to your 
home wireless network.
≥ Check the password for your home 
wireless network. ∫
Note for the iOS version
After step 3
1 Enter the password for the home 
wireless network to which the iOS 
device is connected.
2 When a message instructing you 
to connect the iOS device to this 
system is displayed, press the 
home button.
3 On the Wi-Fi network selection 
screen in “Settings”, select 
“00 Setup _ _ _ _ _ _”.
4 When a message indicating the 
completion of the connection to 
this system is displayed, restart 
the app.
5 When a message indicating the 
completion of the Wi-Fi setup of 
this system is displayed, close the 
app, and then check the operation 
of AirPlay, etc.
1Press [SETUP] on the remote 
control repeatedly to select 
“Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2Press [SETUP] on the remote 
control repeatedly to select 
“Manual” and then press [OK].
3Start “Panasonic Stereo System 
Network Setup” on your 
smartphone and follow the 
indications.
Using AirPlay
The following explanations are based on an iPhone.
≥AirPlay, iPad, iPhone, and iPod touch are trademarks of Apple Inc., 
registered in the U.S. and other countries. 
Lightning is a trademark of Apple Inc. 
≥ App Store is a service mark of Apple Inc.
≥ Android and Google Play are trademarks of Google Inc.
≥ The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi 
Alliance.
≥ The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
≥ “Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks 
of the Wi-Fi Alliance.
≥ All other trademarks are trademarks of their respective owners.
If you have any questions, visit:
U.S.A.: www.panasonic.com/support
Canada: www.panasonic.ca/english/support
1Connect the iPhone to your home wireless network.
2Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay   icon and start play.
“Settings”
“Wi-Fi”Turn onYour home wireless 
network name 
(SSID)*
3
*3: You may be prompted for the password. Enter the password of your home wireless network.
y            yy            y“Music”
“Panasonic PMX9 _ _ _ _ _ _”
Play starts. 
(with a slight delay)
Does your wireless network router support 
WPS (Wi-Fi Protected SetupTM)?
Are you using an iPod touch/iPhone/iPad? Is the iOS version 5.0 or later?
Method 1 Method 2 Method 3
1Press [SETUP] on the remote 
control repeatedly to select 
“Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2Press [SETUP] on the remote 
control repeatedly to select “WPS 
Push” and then press [OK].
“WPS” flashes on the display.
3Press the WPS button on the 
wireless network router.
4Press [OK] on the remote control 
to exit.
2
The settings are completed when 
“Success” is displayed and “ ” is 
indicated on the display.
*2 : The marking may differ.
The following explanations are based on an iPhone.
Lightning connector compatible iPod 
touch/iPhone:
iPod touch/iPhone/iPad with 
iOS 5.0 or later:
1Disconnect iPod/iPhone/iPad 
connected to the main unit.
2Connect the iPhone to your home 
wireless network.
3Connect the iPhone to the main unit.
Choose one of the following 
connections.
iPad
Dedicated cable supplied with the iOS 
device
 
4Press [SETUP] on the remote 
control repeatedly to select 
“Net Setup” and then press [OK].
“With iPod” is indicated on the display.
5Unlock your iPhone and then 
press [OK] on the remote control.
6A message will pop-up on the 
iPhone. Allow the iPhone to share 
the wireless network settings.
7The settings are completed when 
“Success” is displayed and “ ” 
is indicated on the display.
8Press [OK] on the remote control 
to exit.
VQC9787_mst.fm  2 ページ  ２０１４年３月３日　月曜日　午後７時３分