Panasonic Cd Player Weather Band Receiver Cq 5330u Operating Instructions

CQ-5330U11
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5330U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 16 5 4 3 2 1
Tuning in a Weather Band Station
• Press [BAND]to select WB (Weather Band). (apage 9)
• Press any of the buttons 
[1]to [6]to monitor the preset station.
Weather Band Stations
National Weather Radio Broadcasts from over 380 Iocations throughout the
U.S. on seven VHF/FM frequencies.
Tune to weather band to receive continuous weather information 24...

CQ-5330U12
CD Player
Disc Insert and Playback
Disc insert
Playback will start automatically after the player recognized
the loaded disc as an ordinary music CD. (When a CD-R or
CD-RW which has CD-DA formatted data as the same as an
ordinary music CD is loaded, this player recognizes it as an
ordinary music CD.)
“LOAd” will be displayed until the disc is loaded.
Notes:
•Do not insert a disc when “DISC” indicator lights.
• The power will be turned on automatically when a disc is
loading.
Stop and Disc...

CQ-5330U13
Cautions:
•Only 5 (12 cm) CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
• This unit does not support CD text display.
•
This unit does not support MP3 and WMA disc playback.
• Refer to page 23 about notes on CD-Rs/RWs.
• This unit is not designed for any 3 (8 cm) disc.
• If you insert an 3 (8 cm) disc and can not eject it, turn ACC of your car off once and turn it on again, then press
[
u] (eject).
• Do not use irregular shaped discs.
• Do not use discs that have a...

LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5330U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
MODETUNE
SEEK
2 1
CQ-5330U14
CD Changer Control
qCD Changer mode
While a disc magazine is inserted in the CD changer, press [MODE]to select CD changer mode.
Play starts from the first track.
wDisc Selection
[1] ({DISC): Previous disc.
[2] (}DISC): Next disc.
eTrack Selection
Press [TRACK 2]once to go to the next track. Press
repeatedly to step forward through all the...

CQ-5330U15
Note:
CD changer functions are applicable to units with optional CD changer unit.
(sold separately)
Scan Play
(Tracks)
• Press [4] (CD SCAN). The track number blinks
and the first 10 seconds of each track on the
discs play in sequence.
• Press 
[4] (CD SCAN)again to cancel and
continue with the current track.
Scan Play
(Discs)
• Press and hold [4] (CD SCAN)for more than 2
seconds. The first track of all the discs in the
magazine is played for 10 seconds each and
Disc Number blinks.
• Press and...

CQ-5330U16
Preparation:
Connect the XM receiver (XM DIRECT MODEL:XM-RVR-D-001) to the Unit CQ-5330U.
XM satellite radio is available on a chargable basis.
LOUD
MUTE
SCAN MODE
BANDTUNE
SEEK
ILL
PWRALMCLK
CQ-5330U
DISC CD SCAN RPT RDM
APM DISP
VOLSEL / SATPUSH
BASS/TREB/BAL/FADER6 5 4 3 2 1
qXM Mode
(When a XM receiver is connected.)
Press 
[MODE]to change to the XM mode.
wBand
Press [BAND].
eChannel Selection
Press [}]: Up
Press 
[{]: Down
Press and hold 
[}]or [{]for more than 2
seconds to change...

CQ-5330U17
• When the display shows “CAT ON”,
Press 
[2] (}): Up
Press 
[1] ({): Down
2 12 1
(without operation during 5 seconds.)
Press [2] or [1].
(Receiving)
(Received)
(interdisplay for 2 seconds.)
Category Name
Category Name
Notes:
CAT OFF: Every channel can be selected from  every category.
CAT ON: Only channels in the current category can be selected.
Default: CAT OFF
Manual Preset Memory
Up to 6 channels each can be saved in the XM1, XM2 and XM3 preset  station memories.
qSelect a band and a...

CQ-5330U18
Display Change
Press and hold [MODE](DISP) for more than 2 seconds.
XM ID Confirmation
• Push and hold the knob [SEL]for more than 2 seconds and then push again during 2 seconds.
MODE
(Press and hold)Channel name
(Reading artist name)
(Reading song title)
Note:
Display when there is no name/title or can not decode.
(Push and hold) (Push)
Note:
If the ID number is 12345678 for example.
• Push the knob for more than 2 seconds to resume to the previous mode when displaying “RADIO ID” or ID...

CQ-5330U19
Troubleshooting 
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch the power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit by yourself because it
is dangerous to do so.
No power.
Trouble
Vehicle’s ignition switch is not on.
aTurn your vehicle’s ignition switch to ACC or ON.
Cables are not correctly connected....

CQ-5330U20
Troubleshooting (Continued)
Much noise in FM stereo
and monaural broad-
casts.
Trouble
Station is too far, or signals are too weak.
aSelect other stations of higher signal level.
The radio antenna is not extended enough.
aExtend fully the radio antenna.
Preset station is reset.Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always active.
Cause/Step
❐Radio
Disc is in the CD
compartment but no
sound is made, or disc is
ejected automatically.
Trouble...