Panasonic Aac Wma Mp3 Cd Player Receiver Cq Rx100u Operating Instructions

- 11 -
Notes on MP3/WMA/AAC (continued)
Display Information
Displayed items•CD-TEXT
Disc title
Track title•MP3 (ID3 tag)
Album name
Title name/artist name
•MP3/WMA/AAC
Folder name
File name•WMA (WMA tag)
Album name
Title name/artist name
•AAC (Song information) 
Album name
Title name/artist name
Displayable characters•  Displayable length of fi le name/folder name: within 
32 characters. (Unicoded fi le and folder names are reduced 
by half in the number of displayable characters.)
•  Name fi les and...

- 12 -
Notes on MP3/WMA/AAC (continued)
\CQ-RX200U  \CQ-RX100U  \CQ-RX100L\
Compression method Bit rate VBR Sampling frequency
MPEG 1 Audio Layer-3 (MP3) 32 k – 320 kbps Yes 32, 44.1, 48 kHz
MPEG 2 Audio Layer-3 (MP3) 8 k – 160 kbps Yes 16, 22.05, 24 kHz
MPEG 2.5 Audio Layer-3 (MP3) 8 k – 160 kbps Yes 8, 11.025, 12 kHz
Windows Media Audio Ver. 2 – 9* 64 k – 160 kbps Yes 32, 44.1, 48 kHz
* WMA 9 Professional/LossLess/Voice are not supported. 
Folder Selection Order/File Playback Order
Maximum number of fi...

- 13 -
Preparation
Battery 
Installation Clock Setting
Pull the insulation fi lm out from 
the backside of the remote control 
gently.
1Set your car’s ignition switch 
to the ACC or ON position. C C A
N O
The 12-hour system is used for the clock.
1Press[DISP].
(clock display)
2Hold down [DISP] for more than 
2 seconds. 
Hour blinks
3Adjust the hour. 
Hour entered
[]: sets the hour ahead. 
[]: sets the hour back.
4Press[DISP].
Minute blinks
5Adjust the minute.
 Minute entered
[]: sets the minute ahead....

- 14 -
General
[VOL] (Volume) [SRC] (Source)
selects a source.
[PWR] (Power)
toggles power on/off.
Power On/OffSet your car’s ignition switch to the ACC or ON position.Power on:Press [SRC] (PWR).
Power off:Hold down [SRC] (PWR) for more 
than 1 second. 
Remote Control Sensor
[SQ](Sound Quality)
selects a sound type (SQ).AUX1 
Connector(3.5 mm œ stereo)From line output of external sound/audio device (ex. Silicon-
audio player, HDD player, etc.) 
Caution•Set the volume level to low enough before the AUX...

- 15 -
[BAND]
selects a band in the radio source.
[APM] (Auto Preset Memory)
executes APM in the radio source. (Hold it 
down for more than 2 seconds.) [SRC] (Source)
selects a source.
Preset buttons [1] to [6]
selects a preset station in the radio source,
and presets the current station. (Hold it down for more than 
2 seconds.)[TUNE] [TUNE]
down/up the frequency. (Hold it down for more than 0.5 seconds 
and release it for seek tuning.)
[DISP](Display)
switches the information on the 
display....

- 16 -
[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
Audio Menu
Volume
(Setting Range: 0 to 40, Default: 18): Up
: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB): Increased
: Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB): Increased
: Decreased
SQ Adjustment
(Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB))
Setting range: 
SQ Low/Bass:  ±12 dB (at...

- 17 -
Function Settings
Function Menu
1Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode. 
2Press[VOL] (PUSH SEL) to select a mode to 
be adjusted.3Tu r n  [VOL] clockwise or counterclockwise to 
adjust. 
[VOL]
selects a value in the function menu.
(PUSH SEL) (Push to select)
selects items in the function menu.
[DISP] (Display)
exits from the function menu....

- 18 -
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, 
CLUB). You can customize your settings for these and save 
them for instant recall.
SQ Changeover  Press [SQ] to activate the SQ selection mode. 
 Press [SQ] to select the sound type as follows. 
Press[DISP] to return to the regular mode. 
Notes: 
• After pressing [SQ] on the main unit, you can also select a 
sound type by pressing the preset buttons [1] to [6].
•  Please refer to “Audio Settings” for the adjustment to each 
speaker. 
SQ...

- 19 -
Direct AccessA track (CD mode), fi le, folder (MP3/WMA/AAC mode) can 
be directly selected.
Example: Track number 5
1Press[#] (NUMBER).
2Press[5].
3Press[BAND] (SET).
Notes:
•  To suspend direct selection, press [DISP].
•  For folder selection, enter a number after pressing [#]
(NUMBER)twice.
Functions only on Main unitThe following functions are not available on remote control 
unit.
• SQ selection • Scroll
• Disc eject • Tag on/off
Battery Replacement 
Remove the battery holder with 
the remote...

- 20 -
\CQ-RX100U  \CQ-RX100L\
RadioDisc PlayerAUX*
\CQ-RX200U\
RadioDisc Player
System-up ConnectorAUX 1*
(
«Right)
QSystem-up Connector\CQ-RX400U  \CQ-RX200U\
When an optional device is connected: 
Shift to connected device 
When connecting CD changer 
When connecting iPod
When connecting XM Receiver
When connecting Sirius Receiver
When connecting Bluetooth® Unit 
OR
When an expansion module is connected: 
The devices connected to the ports 1 to 4 are activated in 
sequence after shifting to AUX2...