Optoma Projector Pro260x User Manual

							11English
Installation
Connect to Computer/Notebook
Connecting the Projector
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
1....................................................................................................Power Cord2.....................................................................................................VGA Cable3...........................................................................................*DVI/HDMI Cable4................................................................................................*RS232 Cable 5.........................................................................................*Audio Input Cable6......................................................................................*Audio Output Cable 7........................................................................................*VGA Output Cable
VGA-IN / SCART / YPbPrVGA-OUTHDMIS-VIDEOVIDEORS-232AUDIO-INAUDIO-OUT
E62405SPR
1
4
7
2
5
6
3  
						

							12English
Installation
Connect to Video Sources
	Due to the difference in applications for each country, some regions may have different accessories.
	(*) Optional accessory 
VGA-IN / SCART / YPbPrVGA-OUTHDMIS-VIDEOVIDEORS-232AUDIO-INAUDIO-OUT
E62405SPR
1....................................................................................................Power Cord2................................................*15-Pin to 3 RCA Component/HDTV Adaptor3.............................................................................*3 RCA Component Cable4.....................................................................................................VGA Cable 5...................................................................................*SCART/VGA Adaptor6..................................................................................................*HDMI Cable7.................................................................................*Audio Cable Jack/RCA8..............................................................................................*S-Video Cable9................................................................................*Composite Video Cable
DVD Player, Set-top Box, HDTV receiver
S-Video Output
198
647
5
Composite Video Output
2
3       
						

							13English
Installation
Powering the projector On / Off
	Turn on the projector first and then select the signal sources.
Powering On the Projector
1. Remove the lens cap. 
2. Securely connect the power cord and signal cable. When 
connected, the Power LED will turn Amber. 
3. Turn on the lamp by pressing “POWER” button either on the 
top of the projector or on the remote. The Power LED will 
now turn Green. 
 The startup screen will display in approximately 10 seconds. 
The first time you use the projector, you can select your 
preferred language after the startup screen displays.
4. Turn on and connect the source that you want to display 
on the screen (computer, notebook, video player, etc). The 
projector will detect the source automatically. If not, push 
menu button and go to “OPTIONS”.  
Make sure that the “Source Lock” has been set to “Off”.
	If you connect multiple sources at the same time, press the 
“SOURCE” button on the control panel or direct source keys 
on the remote control to switch between inputs.
	When Power mode (Standby) is set to Eco (
						

							14English
Installation
	Contact the nearest service center if the projector displays these symptoms. See pages 57-58 for more information.
Warning Indicator
When the warning indicators (see below) come on, 
the projector will automatically shutdown: 
 “LAMP” LED indicator is lit red and if “POWER” indicator 
flashes amber.
 “TEMP” LED indicator is lit red and if “POWER” indicator 
flashes amber. This indicates the projector has overheated. 
Under normal conditions, the projector can be switched 
back on.
 “TEMP” LED indicator flashes red and if “POWER” indica-
tor flashes amber.  
 Unplug the power cord from the projector, wait for 30 seconds 
and try again. If the warning indicator light up again, please 
contact your nearest service center for assistance. 
Powering Off the Projector
1.   Press the “POWER” button to turn off the projector lamp. 
The following message will be displayed on the screen. 
  Press the “POWER” button again to confirm, otherwise 
the message will disappear after 15 seconds. 
When you press the “POWER” button a second time, the 
system will show the countdown timer on the screen.
2. The cooling fans continue to operate for about 10 seconds 
for cooling cycle. When the Power LED turns Amber, the 
projector has entered standby mode.
 If you wish to turn the projector back on, you must wait 
until the projector has completed the cooling cycle and 
has entered standby mode. Once in standby mode, simply 
press “POWER” button to restart the projector.
3. Disconnect the power cord from the electrical outlet and 
the projector.
4. Do not turn on the projector immediately following a power 
off procedure. 
						

							15English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height 
The projector is equipped with elevator feet for adjusting 
the image height.
1. Locate the adjustable foot you wish to modify on the 
underside of the projector. 
2. Rotate the adjustable ring clockwise to raise the projector 
or counter clockwise to lower it. Repeat with the remaining 
feet as needed.
Tilt-Adjustment Feet
Tilt-Adjustment Ring    
						

							16English
Installation
Adjusting the Projector’s Focus
To focus the image, rotate the focus ring until the image is clear.  
 SVGA/XGA series: The projector will focus at distances from 
3.28 to 39.4 feet (1.0 to 12.0 meters).
 WXGA series: The projector will focus at distances from 3.28 
to 39.4 feet (1.0 to 12.0 meters).
Adjusting Projection Image Size
 SVGA/XGA series: Projection Image Size from 22.9” to 
300.0” (0.58 to 7.62 meters).
 WXGA series: Projection Image Size from 27.2” to 301” 
(0.69 to 7.65 meters).
Width
Height
Diagonal
Top View
Side View Projection Distance (D)
Projection Distance (D) Screen
Screen
Screen (W)
Screen (H)
Offset (Hd)
Focus Ring
Zoom Ring               
						

							17English
Installation
 This table is for user’s reference only.
SVGA/XGA
 This table is for user’s reference only.
WXGA
Diagonal length (inch) size of 4:3 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
30.00 0.61 0.46 23.99 18.00 1.19 1.31 3.90 4.30 0.07 0.22 
40.00 0.81 0.61 31.99 23.99 1.58 1.75 5.20 5.73 0.09 0.30 
60.00 1.22 0.91 47.99 35.99 2.38 2.62 7.80 8.60 0.14 0.45 
70.00 1.42 1.07 55.99 41.99 2.77 3.06 9.10 10.03 0.16 0.52 
80.00 1.63 1.22 63.98 47.99 3.17 3.50 10.40 11.46 0.18 0.60 
90.00 1.83 1.37 71.98 53.99 3.57 3.93 11.70 12.90 0.21 0.67 
100.00 2.03 1.52 79.98 59.98 3.96 4.37 13.00 14.33 0.23 0.75 
120.00 2.44 1.83 95.98 71.98 4.75 5.24 15.60 17.20 0.27 0.90 
150.00 3.05 2.29 119.97 89.98 5.94 6.55 19.50 21.49 0.34 1.12 
180.00 3.66 2.74 143.96 107.97 7.13 7.86 23.39 25.79 0.41 1.35 
250.00 5.08 3.81 199.95 149.96 9.91 10.92 32.49 35.82 0.57 1.87 
300.00 6.10 4.57 239.94 179.95 11.89 13.11 38.99 42.99 0.69 2.25 
Diagonal length (inch) size of 16:10 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
30.00 0.65 0.40 25.43 15.90 1.00 1.10 3.29 3.60 0.05 0.16 
40.00 0.86 0.54 33.91 21.19 1.34 1.46 4.38 4.80 0.07 0.22 
60.00 1.29 0.81 50.87 31.79 2.00 2.20 6.57 7.21 0.10 0.33 
70.00 1.51 0.94 59.34 37.09 2.34 2.56 7.67 8.41 0.12 0.38 
80.00 1.72 1.08 67.82 42.39 2.67 2.93 8.76 9.61 0.13 0.44 
90.00 1.94 1.21 76.30 47.69 3.00 3.30 9.86 10.81 0.15 0.49 
100.00 2.15 1.35 84.78 52.99 3.34 3.66 10.95 12.01 0.17 0.55 
120.00 2.58 1.62 101.73 63.58 4.01 4.39 13.14 14.41 0.20 0.66 
150.00 3.23 2.02 127.17 79.48 5.01 5.49 16.43 18.02 0.25 0.82 
180.00 3.88 2.42 152.60 95.38 6.01 6.59 19.71 21.62 0.30 0.99 
250.00 5.38 3.37 211.95 132.47 8.35 9.15 27.38 30.03 0.42 1.37 
300.00 6.46 4.04 254.33 158.96 10.02 10.98 32.85 36.03 0.50 1.64  
						

							18English
User Controls
Using the Control Panel
POWERRefer to the “Power On/Off the Projector” section on 
pages 13-14.
RE-SYNCAutomatically synchronize the projector to the input 
source.
EnterConfirm your item selection.
SOURCEPress “SOURCE” to select an input signal.
MENUPress “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, Press “Menu” again.
Four Directional 
Select KeysUse     to select items or make adjust-
ments to your selection.
KeystoneUse   to adjust image distortion caused 
by tilting the projector. (±40 degrees)
Lamp LEDIndicate the projector’s lamp status.
Temp LEDIndicate the projector’s temperature status. 
Power LEDIndicate the projector’s status.
Control Panel
Control Panel & Remote Control       
						

							19English
User Controls
Remote Control
Using the Remote Control
Power  
Refer to the “Power On/Off the Projector” 
section on pages 13-14.
L ButtonNo function.
R ButtonNo function.
Page +No function.
Page -No function.
Enter  Confirm your item selection.
SourcePress “Source” to select an input signal.
Re-SYNC Automatically synchronizes the projector to 
the input source.
Four Directional 
Select KeysUse     to select items or make 
adjustments to your selection.
Keystone +/-Adjust image distortion caused by tilting the 
projector.
Volume +/-Adjust to increase / decrease the volume.
Brightness Adjust the brightness of the image.
ZOOMZoom in on an image. 
Press   buttons to alter zoom.
Menu
Press “Menu” to launch the on-screen 
display (OSD) menu. To exit OSD, press 
“Menu” again.
HDMIPress “HDMI” to choose HDMI source.
FreezePress “Freeze” to pause the screen image. 
Press this button again to unlock.
HDMI        
						

							20English
User Controls
Using the Remote Control
AV muteMomentarily turns off/on the audio and 
video.
S-Video Press “S-Video” to choose S-Video source.
VGAPress “VGA” to choose VGA sources.
VideoPress “Video” to choose Composite video 
source.