OKI B4350n User Manual

ABOUT THIS MANUAL > 11
ABBREVIATIONS USED
The following abbreviations are used in this manual:
AbbreviationMeaning
Ctrl Control
dpidots per inch
DIMM Dual In-line Memory Module
nnetwork card installed
LED Light Emitting Diode
MFTManual Feed Tray
MPT Multi-purpose Tray
NICNetwork Interface Card
PCL Printer Control Language
PSPostScript (emulation)
PSE PostScript Emulation
RAMRandom Access Memory
SIDM Serial Impact Dot Matrix
Downloaded From ManualsPrinter.com Manuals 

PRINTER COMPONENTS > 12
PRINTER COMPONENTS
Apart from the Operator panels, which are described in the next chapter, 
the B4100, B4250, B4350 and B4350n printers look similar from the 
outside. The important components are identified in the representations 
below.
1. Operator panel (B4350, and B4350n shown)
2. Top paper exit bin (150 sheets, face down)
3. Top cover release button
4. Top paper exit bin extension
5. Top paper exit bin extension paper guide
6. Paper tray content indicator
7. ON/OFF switch
8....

PRINTER COMPONENTS > 13
10. LED array
11. Image drum
12. Manual feed tray (single sheet) (shown in closed position)
13. Paper feed tray (250 sheets)
14. Toner cartridge
15. Fuser unit
16. Top cover
Downloaded From ManualsPrinter.com Manuals 

PRINTER COMPONENTS > 14
17. Power cable connection
18. Cooling fan
19. USB interface connection
20. Parallel interface connection (not available on B4100)
21. Second paper tray (optional) connection (not available on B4100)
22. Network card (optional on B4350 only)
23. RS232 serial interface card (optional on B4250, B4350, B4350n)
Downloaded From ManualsPrinter.com Manuals 

OPERATOR PANELS > 15
OPERATOR PANELS
This chapter describes the function of the operator panels. It is useful to 
describe the Status Monitor software at this point as it provides the B4100 
and B4250 status information and the equivalent of the menu control 
panel on the B4350 and B4350n. (See “Printer Drivers” for installation of 
the Status Monitor.)
Downloaded From ManualsPrinter.com Manuals 

OPERATOR PANELS > 16
B4100, B4250
OPERATOR PANEL
The B4100 and B4250 operator panel consists of 4 LED indicators and a 
control button. From left to right, the LEDs indicate Power On, Ready, 
Manual feed and Error.
LED INDICATORS
The LED indicators show the status of the printer and have five operating 
conditions as follows:
> Indicator off
> Indicator on
> Flash 1 - slow blink - 1 long flash every 4 seconds
> Flash 2 - blink - 1 flash per second
> Flash 3 - rapid blink - 4 flashes per second.
All four...

OPERATOR PANELS > 17
The meaning of the indicator LEDs when they flash (x) is summarized as 
follows:
CONTROL BUTTON
The primary functions of the control button are activated by pressing the 
switch momentarily and releasing. The primary functions are as follows:
> Turning the printer off-line.
> Turning the printer on-line (ready).
> Resuming printing after a paper error, paper jam, print overrun, 
page overflow, or receiving buffer overflow.
> Interrupting data processing when the printer is receiving...

OPERATOR PANELS > 18
> Printing the demo and menu pages.
> Printing any data held in the buffer after printing has been 
cancelled.
The other functions of the control button are activated after turning the 
printer off line then pressing and holding the switch for at least five 
seconds before releasing. The other functions are as follows:
> Printing a cleaning page.
> Resetting the printer and clearing the buffer after printing has 
been cancelled.
STATUS MONITOR
After installing the printer driver...

OPERATOR PANELS > 19
1. Click[Start], [Programs] and select the St a t us  M o n it or.  T h e  
current printer status is shown.
2. Click on the window maximize button and the view expands to 
include the Printer Setup and Preferences tabs.
Printer Setup Tab
Selecting this tab provides access to the Printer Menu button, which, when 
selected, enables configuration of the printer settings via a series of tabs 
Downloaded From ManualsPrinter.com Manuals 

OPERATOR PANELS > 20
described in outline below. At all stages, detailed on-line help is provided 
via the Help button.
1.Paper: set paper size for standard tray, secondary tray (if 
installed), and manual feed, tray sequence and default number of 
copies.
2.Layout: set paper cassette size, printer emulation, lines per page 
and paper orientation.
3.Quality: set resolution (dpi), smoothing and darkness.
4.Economy: set power save delay, toner save, auto eject time, 
manual timeout, low toner action and...