Oce TCS400 User Manual

System specifications 301
Specifications drivers and job submission software
Océ drivers 
Optional application software
Software environment Required driver Remarks
Microsoft
® Windows® 9.x, 
ME, 2000, NT 4.0, XPWindows® Printer Driver Generating 
HP-GL/RTL
AutoCAD
® 14 (on all sup-
ported platforms)Océ ADI 
AutoCAD
® 
2000/2001/2002 (on all 
supported platforms)Océ HDI 
Graphical application soft-
ware on Microsoft
® Wi n-
dows, Apple® Macintosh 
and Unix™ PostscriptOcé Postscript 3
Function Application...

302 Océ TCS400 User manual
Downloaded From ManualsPrinter.com Manuals 

303
Océ TCS400
User manual
Appendix B
Safety information
Downloaded From ManualsPrinter.com Manuals 

304 Océ TCS400 User manual
Instructions for safe use
Introduction
Océ designed products are tested in accordance with the strictest international 
safety standards. It is important that you observe the safety rules included in 
this appendix to help assure safe working with the Océ TCS400.
Maintenance
■Do not remove any screws from fixed panels.
■Do not do any maintenance activities other than the maintenance activities 
for the parts and the maintenance materials described in this manual.
■Do not place...

Safety information305
■If for some reason you have to move the machine yourself, please make sure 
that the mains power point has the right fuse capacity. See the Océ TCS400 
safety data sheet in this appendix for information about maximum current.
■Do not bridge any mechanical or electrical circuit breakers.
■Do not use an extension lead to connect the machine.
■This machine is not designed for connection to an IT power system. An IT 
power system is a voltage network in which the neutral wire is not...

306 Océ TCS400 User manual
Safety data sheets
Introduction
The disclaimer below applies to all safety data sheets in this manual. Contact 
your local Océ organization for questions about Océ products regarding health, 
safety and environment. You can find the address of your local Océ 
organization in appendix C of this manual.
Disclaimer 
The safety data sheets in this manual have been compiled to the best of our 
knowledge. They are intended as a compact guide to the safe handling of this 
product. We...

Safety information307
Product safety data sheet Océ TCS400 printer
The content of this safety data sheet is subject to the disclaimer of liability on 
page (see ‘Disclaimer’) of this manual. 
Material safety data sheet Océ inksOcé TCS400
This safety data sheet was not available at the time this manual was published.
Downloaded From ManualsPrinter.com Manuals 

308 Océ TCS400 User manual
Product safety data sheet Océ TCS400 scanner
The content of this safety data sheet is subject to the disclaimer of liability on 
page (see ‘Disclaimer’) of this manual. 
PRODUCT SAFETY DATA SHEET
Océ-USA, Inc.
NumberE-760-a-US
DateJune 2003
Copyright © 2003 Océ-Technologies B.V., Venlo, NL
Model Océ TCS400 Scanner
DescriptionWide format color scanner
Scan width
Scan speed40 “ 
0,5 m/min
Dimensions Width1340 mm
Depth490 mm
Height1070 mm
Weight102 kg
Vo l t a g e100-240 V...

Safety information309
EPA ENERGY STAR®
Introduction
Océ-Technologies B.V. has joined the ENERGY STAR® Program of the United 
States Environmental Protection Agency (EPA). The purpose of the E
NERGY 
S
TAR® Program is to promote the manufacturing and marketing of 
energy-efficient equipment, thereby potentially reducing combustion-related 
pollution. Using the energy management features outlined below prevents 
unnecessary power consumption, which helps to prevent air pollution from 
electricity...

310 Océ TCS400 User manual
Features
The EPA ENERGY STAR® Criteria for printers involves the following feature.
■Sleep mode
The power use of some functions is automatically decreased to save energy. 
The printer enters the sleep mode 30 minutes after the last print job is 
completed. The key operator can adjust this default time within a range 
between 30 and 240 minutes.
It is suggested that you determine the appropriate default time for your work 
pattern by changing the setting in increments of 30...