Netgear Centria Wndr4700 Wndr4720 Media Storage Router User Manual

Storage71
 CENTRIA WNDR4700/WNDR4720
4. 
Use the Power On/Off button to turn off the router.
5. Open the router side door and release the internal latch as shown.
6. Grab the top and bottom of the HDD with your fingers and pull to remove it.
7. If you are installing a 0.75-inch-thi ck HDD (this is uncommon), insert the tray into the router.
Follow the THIS SIDE UP  and the BACK OF PRODUCT  signs on the tray to place it in 
the correct orientation.  

Storage72
CENTRIA WNDR4700/WNDR4720 
8. 
The connector
is up.
Insert the HDD.
9.  Close the latch to secure
  the HDD in place. 
10.  Close the side door of th
 e router.
If the latch is not in the correct position or the HDD is inserted in the wrong direction, then 
the side
  door to the router cannot be closed.
When you turn on the router, the HDD LED shows the status of the HDD. See  Table 1, 
LED description on p
 age 10 .
Format the HDD
If you install the HDD during your initial router setup, the...

Storage73
 CENTRIA WNDR4700/WNDR4720
To format the HDD:
1. 
Select  Advanced > Storage > Advanced Settings . 
2. Click the Format Internal Disk  button. 

74
6
6.   ReadySHARE Printer
Share a printer connected to the USB port
ReadySHARE Printer is compatible with Macs and Windows PCs. It lets you connect a USB 
printer to the router’s USB port, and access it wirelessly. 
This chapter contains the following sections:
•     ReadySHARE Printer 
•     USB Control Center Utility 
For more information about ReadySHARE features, visit www.netgear.com/readyshare.  

ReadySHARE Printer75
 CENTRIA WNDR4700/WNDR4720
ReadySHARE Printer
You can connect a USB printer to the router’s USB port, and share it among Windows and 
Mac computers on the network. 
To set up ReadySHARE Printer:
1. 
Con
nect the USB printer to the router’s USB port with a USB printer cable.
2. Inst
all the USB printer driver software  on each computer that will share the printer. If you do 
not have the printer driver, contact the printer manufacturer to find and download the most 
recent printer...

ReadySHARE Printer76
CENTRIA WNDR4700/WNDR4720 
4. 
Follow the instructions to install t he NETGEAR USB Control Center utility.
5.  Af
ter you have installed the utility, select the language. 

ReadySHARE Printer77
 CENTRIA WNDR4700/WNDR4720
6. 
The first time you access the utility, you are asked to select the printer and click the  Connect 
button.
Once the connection is established, the  status changes to Manually connected by  xxx.
You can click the Disconnect button at any time to releas e the connection. The status 
then changes to Available.
After you click the Connect button once on each co mputer in the network, the utility on each 
of them handles the printing queue and handling. The...

ReadySHARE Printer78
CENTRIA WNDR4700/WNDR4720 
•     
You can set the value for the default time-out time from  Tools > Configuration.
•      Th
e USB Control Center utility must be running for the computer to be able to print to 
the USB printer attached to the router. If you exit the utility, printing does not work.
•      Some fire
 wall software, such as Comodo, bl ocks the ReadySHARE Print utility from 
accessing the USB printer. If you do not see the printer in the utility, you can disable 
the...

ReadySHARE Printer79
 CENTRIA WNDR4700/WNDR4720
USB Control Center Utility
The USB Control Center utility allows you 
to control a shared USB device from your 
computer that is connected to the USB port on yo ur router. The utility allows you to control a 
printer and a scanner. 
You have to install the utility on each computer  on the net
 work from which you want to control 
the device. You can download this utility for PC and Mac at 
www.netgear.com/landing/en-us/readyshare.aspx .
When you launch the...

ReadySHARE Printer80
CENTRIA WNDR4700/WNDR4720 
Control Center Configuration
Select Tools > Configuration
 to display the following screen:
Automatically execute when logging on Windows . Enable this utility to start automatically 
when you are logged in to Windows.
Timeout . S
 pecify the time-out value for holding the USB resource when it is not in use.
Language. Select t
 he display language for this utility.
USB Printer
The first time you use a printer, click  Connect. You might be asked to install...