Home > NEC > Communications System > NEC Roamer An Open Application Interface Installation Guide

NEC Roamer An Open Application Interface Installation Guide

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Roamer An Open Application Interface Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ROAMER
    AN
    OPEN APPLICATION INTERFACE (OAI)
    INSTALLATION GUIDE
    NEC America, Inc.
    NDA-30016-003
    Revision 1.0
    February, 1997
    Stock # 241735 
    						
    							LIABILITY DISCLAIMER
    NEC America reserves the right to change the specifications,  functions, 
    or features in this document at any time without notice.  NEC America 
    has prepared this document for use by its employees and customers.  The 
    information contained herein is the property of NEC  America and shall 
    not be reproduced without prior written approval from NEC America.
    Copyright 1996
    NEC America, Inc. 
    						
    							NDA-30016  Revision 3.0Page i
    Roamer Installation Guide CONTENTS
    TABLE OF CONTENTS
    Page
    Chapter 1 - Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1
    Chapter 2 - Application Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
    Step 1: Application Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
    Step 2: Primary Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
    Step 3: OAI Facilities  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
    Step 4: Secondary OAI Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
    Step 5: User-Defined Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
    Chapter 3 - Database Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   11
    Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
    Field Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
    Chapter 4 - MAT Assignments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   15
    Assignment of MSF Function Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    AOKC Command: (Assignment of OAI Key Codes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
    AKY1 Command: (Assignment of Dterm Function Key) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
    Assignment of Free Location Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
    ASYD Command: (Assignment of System Data) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
    Assignment of Numbering Plan to Support Free Location Feature  . . . . . . . . . . . . . . . . . . . . . . .  18
    ANPD Command: (Assignment of Numbering Plan Data) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
    ASPA Command: (Assignment of Special Access Code) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
    ASDT Command: (Assignment of Station Data)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18 
    						
    							Page iiNDA-30016  Revision 3.0
    CONTENTS Roamer Installation Guide
    This Page Left Blank. 
    						
    							NDA-30016  Revision 3.0Page iii
    Roamer Installation Guide FIGURES
    LIST OF FIGURES
    Figure TitlePage
    1-1 Installation Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
    4-1 OAI Function Key Assignment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
    4-2 OAI Function Key Assignment Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17 
    						
    							Page ivNDA-30016  Revision 3.0
    FIGURES Roamer Installation Guide
    This Page Left Blank. 
    						
    							NDA-30016    Revision 3.0Page 1
    Roamer Installation Guide Introduction
    Chapter 1 Introduction
    This guide provides specific field entries that need to be made in the process of 
    installing and configuring Roamer. In addition to this guide, use the following 
    manuals for this installation:
    •Applications Manager (APM) Installation Manual – Contains step-by-step 
    instructions for installing the software from the release media.
    Applications Manager (APM) Operations Manual – Explains how applications 
    like Roamer are configured in the APM environment, using the entries and 
    values provided in this guide.
    NEAX2400 System Manuals – Give very detailed explanations about the 
    assignments that need to be made through the Maintenance Administration 
    Terminal (MAT) commands on the NEAX2400.
    The installation and set up of Roamer involves the following processes. Each of 
    these topics is covered in more detail in the remaining chapters of this book:
    Software Installation – Roamer software must first be loaded from the release 
    media. Log in to the APM Platform Management Menu, select the Installation 
    of Applications/Packages option, and follow the instructions provided in the 
    APM Installation Manual to complete this part of the installation.
    Application Configuration – Roamer is internally supported by the APM and 
    must be configured in the APM environment. Chapter 2 of this guide provides 
    the information that must be entered into this APM configuration file. Use the 
    instructions provided in the APM Operations Manual to make the entries 
    provided in this section.
    Database Requirements – Roamer requires two application databases, one of 
    which is constructed and maintained through the APM Database 
    Administration option. The process begins with the creation of a master 
    definition file and its related master database. An application definition file is 
    constructed which enables the processing of the master files into an application 
    database. Chapter 3 of this guide defines the information which must be 
    included in these definition and database files. Use the instructions provided in 
    the APM Operations Manual to make the entries contained in this section. 
    Mat Assignments – Several data settings must be assigned at the NEAX 
    Maintenance Administration Terminal (MAT) before Roamer will function. 
    Chapter 4 of this guide specifies the necessary commands and the values at 
    which they are to be set. Use the instructions provided in the NEAX2400 IMS 
    System Manuals to make the entries contained in this section. 
    						
    							Page 2NDA-30016   Revision 3.0
    Introduction Roamer Installation Guide
    A Note About the Logical and Physical Numbers Used By Roamer: 
    Roamer uses logical and physical numbers to move users from one phone to 
    another. A physical number (e.g., 4502) is the actual extension associated to a 
    D
    term or station through the NEAX2400 MAT. A logical number (e.g., 202) is an 
    arbitrary number that is associated to a telephone user and that is controlled by the 
    Open Application Interface (OAI). Physical numbers are not moved. Logical 
    numbers move with the user. Thus, when a user indicates a move, Roamer finds the 
    user’s logical number and reassigns it to the physical number of the new telephone.
    During installation, a logical number and a home physical number are assigned to 
    each user in the Roamer database. Assignments are made at the NEAX2400 MAT 
    which associates those physical numbers to specific D
    terms.
    These two sets of numbers can be the same or different. If they are different and 
    OAI processing is interrupted, Roamer may lose access to the physical numbers 
    since OAI relocates users by their logical numbers. If the two numbering systems 
    are the same and OAI processing is interrupted, all users can be restored to their 
    physical home phone numbers by disabling the Free Location Feature through the 
    NEAX2400 MAT.
    The installation process, including its presentation in this manual and reference to 
    other manuals that you need to complete installation, is illustrated in Figure 1-1 on 
    page 3: 
    						
    							NDA-30016   Revision 3.0Page 3
    Roamer Installation Guide Introduction
    Figure 1-1   Installation RequirementsSoftware Installation
    Software Release Media
    Application Configuration
    Application Characteristics
    Primary Parameter Configuration
    OAI Facilities (Optional)
    OAI Configuration Parameters (Optional)
    User-Defined Parameters
    NEAX2400 IMS
    Maintenance Administration
    Terminal (MAT) Assignments
    AOKC (Assignment of OAI Key Codes)
    AKY1 (Assignment of D
    term Function Key) ROAMER
    INSTALLATION REQUIREMENTS
    Chapter 1
    Chapter 4 Chapter 2Discussed in chapter:
    Instructions in:
    APM Installation
    Manual
    NEAX2400 IMS
    System Manuals APM Operations
    Manual
    Database Requirements
    Master Definition File
    Master Database File
    Application Definition File
    Application Database Chapter 3APM Operations
    Manual 
    						
    							Introduction Roamer Installation Guide
    Page 4NDA-30016   Revision 3.0
    This Page Left Blank. 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Roamer An Open Application Interface Installation Guide