NEC Neax 2400 Ipx Isdn Feature Programming Manual
Here you can view all the pages of manual NEC Neax 2400 Ipx Isdn Feature Programming Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 51
NDA-24305 CHAPTER 5 Page 33 Revision 1.0 AUTOMATIC CALL DISTRIBUTION-PRI Note 1: The features indicated “Not Applicable” are features not related to trunks. Note 2:ACD features are not available for incoming data calls from ISDN trunk. Note 3:When an incoming call placed in a queue, the call is automatically released in 90 seconds. 2. Operating Procedure Refer to ACD System Manual. 3. Programming STEP 1: Assign the Basic Data for ISDN. (Refer to Chapter 3, “Basic Data Assignment for ISDN”.) STEP 2:...
Page 52
CHAPTER 5 NDA-24305 Pag e 3 4 Revision 1.0 ANNOUNCEMENT SERVICE-PRI A-92 ANNOUNCEMENT SERVICE-PRI 1. General Description This feature allows a user from the ISDN trunk to hear a prearranged announcement when the user dials a predetermined access code. Note:This feature requires an announcement machine or a Digital Announcement Trunk (DAT). 2. Operating Procedure 1. The system receives the announcement trunk access code. (a) If a multiple connection is made, the announcement is repeatedly sent out. (b) If...
Page 53
NDA-24305 CHAPTER 5 Page 35 Revision 1.0 AUTOMATIC CIRCUIT ASSURANCE-PRI A-94 AUTOMATIC CIRCUIT ASSURANCE-PRI 1. General Description When a call connection time is less than or greater than a pre-determined time period, the system can display or print a reference to it using this feature. Note 1:This feature cannot be activated without Station Message Detail Recording System-RS232C[S-10]. Note 2:This feature is not activated for Station-to-Station or Station-to-Attendant calls under the following...
Page 54
CHAPTER 5 NDA-24305 Pag e 3 6 Revision 1.0 AUTOMATIC TRUNK TEST-PRI A-96 AUTOMATIC TRUNK TEST-PRI 1. General Description The AUTOMATIC TRUNK TEST capability provides a functional test on a large number of ISDN trunks at a prearranged time. The results of the test are reported at the MAINTENANCE ADMINISTRATION TERMINAL (MAT) [M-18]. The test can include: Ringback Tone Test, 1 kHz Tone Test and Trunk Selection Test, by having the proper Test Trunk termination at the distant office. 2. Operating Procedure...
Page 55
NDA-24305 CHAPTER 5 Page 37 Revision 1.0 BOSS-SECRETARY TRANSFER-PRI B-19 BOSS-SECRETARY TRANSFER-PRI 1. General Description This service feature allows a secretary to voice-announce a call to a boss when the secretary answers a call from an ISDN trunk on the boss’ line. 2. Operating Procedure 1. Call terminates to boss’ line. 2. Secretary answers the call on Boss’ line of Secretary’s D term. 3. Secretary presses boss’ line key; incoming call is placed on hold, a signal tone is transmitted over the...
Page 56
CHAPTER 5 NDA-24305 Pag e 3 8 Revision 1.0 BOSS-SECRETARY OVERRIDE-PRI B-22 BOSS-SECRETARY OVERRIDE-PRI 1. General Description This feature enables a secretary to voice-announce a call from an ISDN trunk to a boss when he is currently on his My-line. 2. Operating Procedure Example: Station 200, Boss Station 201, Secretary Boss is currently connected to Trunk “A”. Call from an ISDN trunk (Trunk “B”) terminates to Station 201, intended for 200. 1. Secretary answers station 201. 2. Secretary asks caller to...
Page 57
NDA-24305 CHAPTER 5 Page 39 Revision 1.0 BOSS-SECRETARY OVERRIDE-PRI Operations when the boss answers the secretary. Case 1: 1. Boss presses the: “ANSWER” key or “TRANSFER” key. If Boss has a single line telephone, flashes hook switch. 2. Boss converses with Secretary (Trunk “A” is placed on hold). 3. Secretary hangs up, Boss is speaking with Trunk “B”. Case 2: 1. Boss presses the “ANSWER” key or “TRANSFER” key. If Boss has a single line telephone, flashes hook switch. 2. Boss converses with Secretary...
Page 58
CHAPTER 5 NDA-24305 Pag e 4 0 Revision 1.0 CALL FORWARDING-ALL CALLS-PRI C-95 CALL FORWARDING-ALL CALLS-PRI 1. General Description This feature permits all calls from an ISDN network destined for a particular station to be routed to another station (or to the Attendant) regardless of the busy or idle status of the called station. Activation and cancellation may be accomplished by either the individual station user or the Attendant. 2. Operating Procedure To activate CALL FORWARDING-ALL CALLS-PRI from an...
Page 59
NDA-24305 CHAPTER 5 Page 41 Revision 1.0 CALL FORWARDING-ALL CALLS-PRI 3. Programming STEP 1: ASYD - System Data 1, Index 4, bit 6: One burst of ringing at the forwarding station when CALL FORWARDING-ALL CALLS is in service? 0/1: No/ Yes. (single-line station only) Index 248, bit 7:Dial Tone to be sent out when a station on which CALL FORWARDING-ALL CALLS is set, goes off-hook to place and outgoing call 0/1: Dial Tone/Special Dial Tone. Index 69, bit 1: A burst of Ringback Tone to alert the person...
Page 60
CHAPTER 5 NDA-24305 Pag e 4 2 Revision 1.0 CALL FORWARDING-ALL CALLS-Dterm-PRI C-95D CALL FORWARDING-ALL CALLS-Dterm-PRI 1. General Description This feature permits all calls from an ISDN network destined for a particular station to be routed to another station or to the Attendant, regardless of the busy or idle status of the called station. Activation and cancellation may be accomplished by the station user or the Attendant. CALL FORWARDING-ALL CALLS-D term-PRI [C-95D] may be set or canceled by the...