Namco Ridge Racer 2 Update 1 Technical Bulletin Manual
Have a look at the manual Namco Ridge Racer 2 Update 1 Technical Bulletin Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 93 Namco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TECHNICAL BULLETIN Problem:-Not accelerating properly and/or brake remaining partly on. Cause:-Quadrant Gear moving on the shaft. Remedy:-Drill a 3mm hole through the quadrant gear and shaft and fit an M3x15 screw and nut. RIDGE RACER 2 ACCELERATOR/BRAKE ASSY INSTRUCTIONS DISCONNECT FROM POWER SUPPLY BEFORE COMMENCING 1. Remove four hex head bolts (M6x20) and withdraw the pedal assembly forward from the machine. 2. Disconnect the connector. 3. Loosen the quadrant gear clamp screw and remove the quadrant gear. 4. Turn the potentiometer shaft almost fully clockwise and refit the quadrant gear (see diagram below for correct position) ensuring that the clamp screw is fully tightened. 5. Drill a 3mm diameter hole through both the quadrant gear and shaft and fit an M3x15 screw and nut as shown. 6. Connect the connector and refit the pedal assembly to the machine. 7.Re-initialize the game (see operators manual) before the game is played.