Home > Mitsubishi > Television > Mitsubishi Electric Wd 82838 Owners Guide

Mitsubishi Electric Wd 82838 Owners Guide

Here you can view all the pages of manual Mitsubishi Electric Wd 82838 Owners Guide. The Mitsubishi manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 21

21
For assistance call 1(800) 332-2119
4
TV Menus
Press MENU on the remote control to open the main menu and access these settings.
PictureVideoSettings in this menu are saved for the current input only.  To make picture adjustments:
From the Picture > Video menu
Press 1.   to highlight an option
Press 2.    to adjust.
While watching TV
Press the 1. VIDEO key.
Press 2.   to select a video option.
Press 3.    to change the setting.
Picture 
Mode
BrilliantFor use under bright light.Set the Picture Mode...

Page 22

22 4.  TV Menus
For assistance call 1(800) 332-2119
PictureReset
Resets sound and picture adjustments for the current input.  Highlight the •	Reset icon 
and press ENTER twice to perform reset.
Reset•	 has no effect on universal settings (Balance, Listen To, Language) or on 
Advanced picture settings.
PicturePerfect
(PerfectColor/PerfecTint)  838 Series.  Sliders let you adjust the saturation (intensity) and 
hues of six separate colors for the current image source.
PictureAdvanced
Advanced Modes....

Page 23

 4.  TV Menus 23
For assistance call 1(800) 332-2119
SoundGlobal
838 Series.  Settings in this menu apply to all inputs.
Analog Audio 
Out
These settings affect audio from the AUDIO/SURROUND OUTPUT jacks.
FixedUse with an analog A /V receiver.
VariableUse with headphones; adjust headphone volume using the TV’s remote control.
Rear838 Series.  Use when supplementing the TV’s speaker array with external rear speakers.
SubwooferSelect On to turn on audio to a connected subwoofer.  Set to Off if no subwoofer...

Page 24

24 4.  TV Menus
For assistance call 1(800) 332-2119
Setup
Setup Language
Select either English or Spanish for on-screen menus.•	
Select the language for a digital program from the •	ANT input (if available).
SetupClock
Set the TV clock to:
Use the TV Timer to power on the TV automatically at a preset time
•	
Receive correct updates to ChannelView listings
•	
Note:  When the Daylight Savings Time change occurs, you must open this menu and set the TV’s clock ahead or back.
SetupTimer
The Timer tells the TV...

Page 25

 4.  TV Menus 25
For assistance call 1(800) 332-2119
Inputs
InputsName
Lets you assign or •	change names of inputs appearing in the Input Selection menu.
Highlight the input and press •	ENTER to see the name choices.
Lets you turn the •	Ant input On/Off (to display or hide it in the Input Selection menu).
838 Series.•	  Lets you turn the Bluetooth input On/Off (to display or hide it in the Input 
Selection menu); a paired device is cleared from memory when the Bluetooth icon is 
turned off.
Lets you...

Page 26

26 4.  TV Menus
For assistance call 1(800) 332-2119
Parental Menu
The TV comes from the factory with the rating 
locks turned off and with pre-set U.S. ratings 
TV-PG and movie rating PG.  You must turn 
on blocking for U.S. ratings to activate these 
rating restrictions.  You will be prompted to 
enter a pass code when you select Lock on 
the main menu.
Lock
Important Notes on Rating Locks
•	Parental menu rating locks apply only to channels and signals received 
on the ANT and composite VIDEO jacks.
•...

Page 27

 Appendices 27
For assistance call 1(800) 332-2119
CAUTION
BURN DANGER!  HOT SURFACES INSIDE!
Touch lamp cartridge handle only.  Do not touch lamp or lamp car-
tridge housing.  Keep lamp cartridge horizontal during removal.  Do 
not tilt as glass may come out and cause injury.  Replace lamp car-
tridge only with the same part number 915B441001.
CAUTION: If the television is on, press POWER to turn it off.  Unplug the television and 
allow it to cool for at least one hour before attempting to replace the...

Page 28

28 Appendices
For assistance call 1(800) 332-2119
Lamp-Cartridge Replacement
Removing the Old Lamp Cartridge
Turn off TV power and unplug the TV.  Allow the 1. 
lamp to cool for at least one hour before proceed-
ing.
After the lamp has cooled, remove the cover of the 2. 
lamp compartment, located on the back of the TV.
Refer to figures 1 and 2.  Use a #2 (medium) Phillips 
screwdriver to loosen the screw securing the cover.  
Keep the screw and cover for re-installation
Wi3. th a medium Phillips...

Page 29

 Appendices 29
For assistance call 1(800) 332-2119
Cleaning Recommendations
Normally, light dusting with a dry, non-scratching duster 
will keep your TV clean.  If cleaning beyond this is 
needed, please use the following guidelines:
First, turn off the TV and unplug the power cord from the 
power outlet.
Occasionally clean dust build-up from the air-intake 
grilles on the back and sides of the TV.  Clean using a 
vacuum cleaner with a brush attachment.
Top and Sides of the TV 
Gently wipe down your TV...

Page 30

30 Appendices
For assistance call 1(800) 332-2119
Enter the first five-digit code listed for your equip-3. 
ment.
Point the remote control at the equipment and press 4. 
POWER.  If the product has no power on/off function, 
press a different key, such as   (PL AY),   (STOP), 
VOLUME UP, or MUTE.
If the equipment does not respond, repeat the pre-5. 
ceding two steps using the next five-digit code.
Once you have found the correct code, write it in the 6. 
space below for future reference.
ModeDevice...
Start reading Mitsubishi Electric Wd 82838 Owners Guide

Related Manuals for Mitsubishi Electric Wd 82838 Owners Guide

All Mitsubishi manuals