LG M3201c Users Guide

10
Name and Function of the Parts
Rear View

Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
RGB, HDMI/DVI Ports
PC Sound Jack 
: Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports

OUTINVIDEOL-AUDIO-R
VIDEOYP BP RRGB INRGB OUTHDMI/DVI INL-AUDIO-RCOMPONENT IN
AV
OUT AV INREMOTECONTROL INRS-232C(CONTROL&
SERVICE)1
2AUDIO(RGB/DVI)S-VIDEO

*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier\
 (Amp). Make sure...

11

RGB IN
HDMI/DVI IN
First of all, see if the computer, product and the peripherals are turne\
d off. 
Then, connect the signal input cable.When connecting with the D-Sub signal input cable.
When connecting with the HDMI to DVI signal input cable (not included)\
.
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
OUT
INVIDEOL-AUDIO-R
VIDEOYP BP RRGB INRGB OUT
HDMI/DVI INL-AUDIO-RCOMPONENT IN...

12
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at the front side of the product.

INPUT SET

•How to connect to two computers.
Connect the signal cables (HDMI to DVIand D-Sub) to each computer.
Press the INPUT button in a remote control to select the computer to use\
.
•   Directly connect to a grounded power outlet on the wall or a power bar w\
ith a ground 
wire.
Note

Turn on power by pressing the power button on the...

13
Use this function when displaying ANALOG RGB inputs of a PC to the other\
 product.

RGB IN

RGB OUT

RGB IN

RGB OUT

RGB IN

RGB OUT

RGB IN

RGB OUT

Product 1
• To use different products connected to each other
Connect one end of the signal input cable(15-pin D-Sub Signal Cable) t\
o the  RGB OUT
connector of  product 1and connect the other end to the RGB IN connector of other 
products.
Watching RGB Outputs
PC
Product 2 Product 3 Product 4
15-pin D-Sub Signal Cable
Connecting to External...

14
Connecting to External Devices
When connecting with an BNC cable.• Select   AV. 
When connecting with an S-Video cable.
•  Select   AV. 

BA

L-AUDIO-R
VIDEO
AV
OUT AV INS-VIDEO

When connecting with a S-Video cable.
•
 Connect to the S-Video input terminal to
watch high image quality movies.
Connect the video cable as shown in the below figure and then connect th\
e power
cord (See page 11).
BWhen connecting with a BNC cable.
•
 Connect the input terminal with a
proper color match.
A
BNC Cable
(not...

15
• Select  Component 1 
• Select  Component 2 
B
A

VIDEO
YP BP RL-AUDIO-RCOMPONENT IN
1
2

Connect the video/audio cable as shown in the below figure and then, con\
nect the
power cord (See page 11).

•  Connect the input terminal with a proper color match. 
BNC Cable
(not included)
Product
HDTV Receiver

Input
Input

When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i)
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at...

16

RGB IN
RGB OUT
HDMI/DVI IN
AUDIO(RGB/DVI)RGB IN
RGB OUT
HDMI/DVI IN
AUDIO(RGB/DVI)
Connect the video/audio cable as shown in the below figure and then conn\
ect the
power cord (See page 11).
RCA-PC 
Audio Cable
Product
VCR/DVD/Set-top Box
HDMI to DVI
Signal Cable
(not included)
InputInput
When watchingHDMI/DVI/RGB from the VCR/DVD/Set-top Box
(480p/576p/720p/1080i)
VCR/DVD/Set-top Box
Product
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or,...

17
• When you set the input signal of the main screen as  AV (CVBS), you can transmit the signal that 
youre watching to the AV output terminal.

L-AUDIO-R
VIDEO
AV
OUT AV INS-VIDEO

Video/TV
WatchingAV Outputs
BNC Cable
(not included) Audio Cable
(not included)
BNC Cable
(not included) Audio Cable
(not included)
Video/TVProduct
Connecting to External Devices

•
 When multi-connecting in/out cascade format, cables to be less damaged \
are recommended.
We recommend that you should use cable...

18
• Set it up close to the wall so the product doesnt fall over when it is \
pushed backwards.
The instructions shown below is a safer way to set up the product, which\
 is to fix it on the wall so the product doesnt 
fall over when it is pulled in the forward direction. It will prevent th\
e product from falling forward and hurting people. It 
will also prevent the product from damage caused by fall. Please make su\
re that children dont climb on or hang from the product.
* This feature is not...

19

Selecting and Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit

• Press this button to turn on the power. Press this button again toturn it off.
• This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicato\
r
color changes to amber.Power Button

• Adjust the volume. • Adjust the up and down.

• Use this button to show/hide the OSD (On Screen Display) menuscreen.MENU Button

• Use thisbutton to...