LG 26ld335 Owners Manual

11 3
SOUND & LANGUAGE CONTROL
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
When different audio types exist in an input signal, this function allows you to\
 select the audio type 
you want. 
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
•  Auto : Automatically outputs in the order  HE-AAC > Dolby Digital+  > Dolby Digital  > MPEG . 
    (Except for Italy)
   Auto : Automatically outputs in the order  HE-AAC > Dolby Digital+  >...

11 4
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony 
Philips Digital InterFace) output to Dolby Digital. 
If Auto is selected in the digital audio out menu when Dolby Digital is not\
 available, SPDIF output will 
be PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in...

11 5
SOUND & LANGUAGE CONTROL
Settings of the selected Sound Mode return to the default factory settin\
gs.
AUDIO RESET
• Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
OK
Move
●●●●●●●
  SSSSounSounSounSounSounSounSounSounSounSoundMdMdMdModModModModModModModMod Mod Modddde :de :de :de :de :de :de :de :de :de :SStStStaStaStaStaStaStaStaSta Sta Stadddndarndarndarndarndarndarndarndarndarndarddddddddddddd
  • Infinite Sound : Off
 •...

11 6
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
AUDIO DESCRIPTION (IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describin\
g the current situation in a TV 
programme in addition to the basic audio.
When Audio Description On is selected, basic audio and Audio Description are provided only for those 
programmes that have Audio Description included.
Volume Changes the Audio Description volume
Beep  Beeps when a programme with Audio Description information is...

11 7
SOUND & LANGUAGE CONTROL
 I/II
 
■  Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono\
. In mono reception, the 
clarity of 
sound is improved.
 
■ Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you c\
an switch to DUAL I, 
DUAL II or DUAL I+II.
 
DUAL I   Sends the primary broadcast language to the loudspeakers.
 
DUAL II   Sends the secondary broadcast language to the loudspeakers.
 
DUAL...

11 8
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
NICAM RECEPTION (IN ANALOGUE MODE ONLY)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (\
Near Instantaneous 
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received\
.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left\
 and 
right loudspeakers.
Select the sound output.
L+R:  Audio...

11 9
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE / COUNTRY 
SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.* If you want to change Language/ Country selection
• 
Press the MENU/EXIT  button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
NOTE
 
► If you do not finish the set-up  Installation Guide by pressing BACK or if you time out on the OSD (On 
Screen Display) the installation menu will...

120
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
120
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default langu\
age audio will be played.
Use the Subtitle function when two or more subtitle languages are broadc\
ast. If subtitle data in a 
selected language is not broadcast, the default language subtitle will b\
e displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language and Text...

121
SOUND & LANGUAGE CONTROL
< Audio Language Selection >
 
► When two or more audio languages are broadcast, you can 
select the audio language.
-  The audio/subtitles can be displayed in a simpler form with 1 to 3 chara\
cters broadcast by the service pro-
vider.
-  When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of  the Main audio.
< Subtitle Language Selection >
 
► When two or more subtitle languages are broadcast, you 
can select the subtitle...

122
CLOCK SETUP
TIME SETTING
The clock is set automatically when receiving a digital signal in Auto mode. You can set the clock 
manually in  Manual mode.
You must set the time correctly before using on/off timer function.
The TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean 
Time) which is received with the broadcast signal and the time is set au\
tomatically by a digital signal.
When if the city name in  Time Zone is changed into offset, you can change time by 1...