Land Rover 300tdi Enginhe Overhaul P 65 Rover Manual
Have a look at the manual Land Rover 300tdi Enginhe Overhaul P 65 Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ENGINE OVERHAUL65 Crankshaft rear oil seal - refit 1.Ensure that oil seal running surface on crankshaft and oil seal housing mating surface on cylinder block are clean and oil free and that bolt holes in cylinder block are clean and dry. 2.Screw 2 slave guide studs into cylinder block. 3.Position new gasket to cylinder block ensuring that groove along bottom edge of gasket is towards block. NOTE: O ring fitted to early engines is no longer required.4.Slide oil seal protector sleeve over crankshaft, fit oil seal and housing over guide studs and crankshaft, fit and finger tighten 3 bolts, recover oil seal protector sleeve. CAUTION: Do not lubricate oil seal or running surface on crankshaft. Do not separate protector sleeve from oil seal and do not touch lip of seal. If protector sleeve is removed or seal is inadvertently handled, it must not be fitted as the coating applied to the oil seal during manufacture will be destroyed and oil leakage will result. 5.Remove 2 guide studs, fit and finger tighten remaining 2 bolts. 6.Tighten 5 bolts by diagonal selection to 25 Nm.