Konica Minolta magicolor 4650EN User Manual

Clearing Media Misfeeds 177
Clearing a Media Misfeed in Tray 2
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 
1.
2Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 178
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds 179
3Close the right side cover.
4Pull out Tray 2, and then remove 
all media from the tray. 
5Fan the media you removed and 
then align it well.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 180
6Load the media face up in Tray 2.
Make sure that the media is flat.
Do not load paper above the 
 mark. 
7Close Tray 2.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 181
Clearing a Media Misfeed in Tray 3
1Open the right side cover of 
Tray 3.
Before opening the right 
side cover of Tray 3 , fold 
up Tray 1.
2Carefully pull out the misfed 
media.
3Close the right side cover of 
Tray 3.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 182
4Pull out Tray 3, and then remove 
all paper from the tray.
5Fan the paper you removed and 
then align it well.
6Load the paper face up in Tray 3.
Make sure that the paper is flat.
Do not load paper above the 
 mark.
Slide the media guides against the edges of the paper.
7Close Tray 3.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 183
Clearing a Media Misfeed from the Duplex (magicolor 
4650DN only)
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 
1.
2Carefully pull out the misfed 
media.
3Close the right side cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 184
Clearing a Media Misfeed from the Fuser Unit
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 
1.
2Push up the levers of the fuser 
unit cover, and then open the 
cover.
3Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 185
If the misfed media cannot 
be removed by pulling it 
down, pull it from the top of 
the fuser unit.
If the paper becomes crin-
kled and jammed in the fuser 
unit, open the fuser unit 
cover, and then remove the 
paper.
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Downloaded From...

Clearing Media Misfeeds 186
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
4Push down the levers.
Downloaded From ManualsPrinter.com Manuals