JVC Kdr540 Owners Manual

							KD-A645 / KD-R640 / KD-R540 / KD-R440
GET0829-001A [J/JW]
ENGLISH
ESPAÑOL
FRANÇAIS
CD RECEIVER
INSTRUCTION MANUAL
RECEPTOR CON CD
MANUAL DE INSTRUCCIONES
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
For customer Use:
Enter below the Model No. and Serial No. which are located on 
the top or bottom of the cabinet. Retain this information for future 
reference.
Model No. 
Serial No. 
Please read all instructions carefully before operation to obtain the 
best possible performance from the unit.
Por favor lea detenidamente este manual para comprender a fondo 
todas las instrucciones y obtener un máximo disfrute de esta unidad.
Veuillez lires les instructions attentivement avant d’utiliser l’a\
ppareil 
afin d’obtenir les meilleures performances possibles de l’appareil\
.
EN_KD-A645_R640_540_440[J]f.indd   1 EN_KD-A645_R640_540_440[J]f.indd   1 8/15/12   3:41:14 PM
8/15/12   3:41:14 PM 
						

							2
CONTENTSBEFORE USE
BEFORE USE  2
BASICS  3
GETTING STARTED  4
RADIO  5
CD / USB / iPod  6 
How to read this manual
•  Operations explained mainly using  buttons on the faceplate of KD-R540 / 
KD-R440.
•  [XX] indicates the selected items. 
• 
(➜ XX) indicates references are available 
on the stated page number. 
 Warning
  Do not operate any function that takes your attention away from safe dri\
ving.
 Caution
  Volume setting:
•  Adjust the volume so that you can hear sounds outside the car to prevent\
 accident.
•  Lower the volume before playing digital sources to avoid damaging the sp\
eakers by the sudden increase of  the output level.
  General:
•  Avoid using the USB device or iPod/iPhone if it might hinder driving saf\
ety. 
•  Make sure all important data has been backed up. We shall bear no respon\
sibility for any loss of recorded data.
•  Never put or leave any metallic objects (such as coins or metal tools)\
 inside the unit, to prevent a short circuit.
•  If a disc error occurs due to condensation on the laser lens, eject the \
disc and wait for the moisture to evaporate.
  Remote control (RM-RK52):
•  Do not leave the remote control in hot places such as on the dashboard.
•  The Lithium battery is in danger of explosion if replaced incorrectly. R\
eplace it only with the same or  equivalent type.
•  The battery pack or batteries shall not be exposed to excessive heat suc\
h as sunshine, fire or the like.
•  Keep battery out of reach of children and in original package until read\
y to use. Dispose of used batteries  promptly. If swallowed, contact a physician immediately.
  For USA-California Only:
  This product contains a CR Coin Cell Lithium Battery which contains Perc\
hlorate Material—special handling  may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
2
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector with a 
cotton swab gently, being careful not to damage the connector.
Handling discs:
•  Do not touch the recording surface of the disc.
•  Do not stick tape etc. on the disc, or use a disc with tape stuck on it.\
•  Do not use any accessories for the disc.
•  Clean from the center of the disc and move outward.
•  Clean the disc with a dry silicon or soft cloth. Do not use any solvents\
.
•  When removing discs from this unit, pull them out horizontally.
•  Remove burrs from the center hole and disc edge before inserting a disc.\
AUX  7
ILLUMINATION  7
(KD-A645 / KD-R640 only)
Connector (on the reverse 
side of the faceplate)
PANDORA® 8(KD-A645 / KD-R640 / KD-R540 only)
SiriusXM™ 8(KD-A645 / KD-R640 only)
AUDIO SETTINGS 10
MORE INFORMATION  11
TROUBLESHOOTING  12
SPECIFICATIONS  13
INSTALLATION / CONNECTION  14
EN_KD-A645_R640_540_440[J]f.indd   2 EN_KD-A645_R640_540_440[J]f.indd   2 7/24/12   12:21:21 PM
7/24/12   12:21:21 PM 
						

							3
KD-A645
KD-R640
KD-R540
KD-R440KD-R440
BASICS
To Do this (on the faceplate) Do this (on the remote control)
Turn on the power Press L  SOURCE.
•  Press and hold to turn off the power. ( not available )
Adjust the volume Turn the volume knob. Press VOL + or VOL –.
Press the volume knob to mute the sound or pause playback.
• 

Press again to cancel. Press 
 to mute the sound or pause playback.
•  Press again to cancel.
Select a source • Press L  SOURCE repeatedly.
• Press  L  SOURCE, then turn the volume knob within 2 seconds. Press SOURCE repeatedly.
Change the display 
information Press DISP repeatedly. 
(➜ 11)•  Press and hold to scroll the current display information.
( not available )
Faceplate
Attach
How to reset DetachRemote control (RM-RK52)
Volume knob
(turn/press) Loading slot
Detach button Remote sensor
(Do not expose to bright sunlight.)
How to replace the battery
Your preset adjustments will 
also be erased. Pull out the insulation sheet 
when using for the first time.
Display window
ENGLISH
EN_KD-A645_R640_540_440[J]f.indd   3 EN_KD-A645_R640_540_440[J]f.indd   3
8/23/12   3:19:11 PM
8/23/12   3:19:11 PM 
						

							4
GETTING STARTED
Cancel the demonstration
1 Press and hold MENU.2 Press the volume knob to select [DEMO].3 Turn the volume knob to select [DEMO OFF], then press the knob.4 Press MENU to exit.
Set the clock
1 Press and hold MENU.2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK SET], then press the knob.4 Turn the volume knob to select the day, then press the knob.5 Turn the volume knob to adjust the hour, then press the knob.
6 Turn the volume knob to adjust the minute, then press the knob.7 Press MENU to exit.
Set the basic settings
1 Press and hold MENU.2 Turn the volume knob to make a selection, then press the knob. •  See the following table for selection.3 Press MENU to exit.
 To return to the previous hierarchy, press G.
1
2
3
Default: XX
CLOCKCLOCK ADJ
AUTO: The clock time is automatically set using the Clock Time (CT) data i\
n FM Radio 
Broadcast Data System signal. ; OFF: Cancels.
CLOCK DISP
ON: The clock time is shown on the display even when the unit is turned of\
f. ; 
OFF: Cancels.
DIMMER DIMMER SET
Selects the display and button illumination adjusted in the  [BRIGHTNESS] setting.
AUTO: Changes between the day and night adjustments when you turn off or on \
the car 
headlights. *
1 ; ON: Selects the night adjustments. ; OFF: Selects the day adjustments.
BRIGHTNESS
Sets the display and button brightness for day and night separately.1  DAY/ NIGHT: Select day or night.2 BUTTON ZONE/ DISP ZONE: Select the zone for setting.3  Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
DISPLAY SCROLL
 *2ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second 
intervals. ; OFF: Cancels.
TAG DISPLAY
ON: Shows the TAG information while playing MP3/WMA files. ;  OFF: Cancels.
IPOD SWITCH *
3 : For KD-A645 / KD-R640 / KD-R540 only
HEAD MODE: Controls music playback only from this unit. ; IPOD MODE: Controls music 
playback from both the unit and iPod/iPhone. ; EXT MODE: Controls music playback only 
from the iPod/iPhone.
SRC SELECT AM
 *4ON: Enables AM in source selection. ; OFF: Disables.
PANDORA
 *4(For KD-A645 / KD-R640 / KD-R540 only)
ON: Enables PANDORA in source selection. ; OFF: Disables.
AUX
 *4ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select when the 
KS-BTA100 Bluetooth adapter is connected to the AUX jack  (➜ 7). The source name will 
change to BT AUDIO.
*1  The illumination control wire connection is required. (➜ 15)*2  Some characters or symbols will not be shown correctly (or will be blan\
ked).
*3  Displayed only when the source is USB-IPOD.
*4  Not displayed when the corresponding source is selected.
EN_KD-A645_R640_540_440[J]f.indd   4 EN_KD-A645_R640_540_440[J]f.indd   4 7/25/12   5:04:33 PM
7/25/12   5:04:33 PM 
						

							5
RADIO
Search for a station
1 Press L  SOURCE to select FM or AM.2 Press E / F   (or  2 / 3 on RM-RK52) to search for a station automatically. (or) Press and hold E /  F (or 2 / 3 on RM-RK52) until “M” flashes, then press 
repeatedly to search for a station manually.
Store a station
You can store up to 18 stations for FM and 6 stations for AM.
While listening to a station....
Press and hold one of the number buttons (1 to 6) to store.
 (or)1 Press and hold the volume knob until “PRESET MODE” flashes.2 Turn the volume knob to select a preset number, then press the knob.   The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1 to 6).
 (or)1 Press MENU.2 Turn the volume knob to select a preset number, then press the knob.
Search for a your favorite program (PTY Search)
Available only for FM Radio Broadcast Data System stations.
1 Press and hold G.2 Turn the volume knob to select a PTY code (see the right column), then\
 press 
the knob to start searching.
   If there is a station broadcasting a program of the same PTY code as you\
 have  selected, that station is tuned in.
Other settings
1 Press and hold MENU.2 Turn the volume knob to select [TUNER], then press the knob.3 Turn the volume knob to make a selection (see the table below), then p\
ress 
the knob.
4 Press MENU to exit.
Default: 
XX
SSMSSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to 18 
stations for FM. “SSM” stops flashing when the first 6 stations ar\
e stored. Select 
SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations. 
AREA
AREA US: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz. ; 
AREA EU: For any other areas, AM/FM intervals: 9 kHz/50 kHz. ; AREA SA: For 
some South American countries, AM/FM intervals: 10 kHz/50 kHz.
MONO
Displayed only when the source is FM.
MONO ON: Improves the FM reception, but the stereo effect will be lost. ; 
MONO OFF: Cancels.
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from adj\
acent 
stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from 
adjacent stations, but sound quality will not be degraded and the stereo\
 effect will 
remain.
RADIO TIMER
Turns on the radio at a specific time regardless of the current source.1  ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned on.2 FM/ AM: Select the FM or AM band.3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station.4  Set the activation day and time.
• “M” lights up when complete. 
Radio Timer will not activate for the following cases.
•  The unit is turned off.
•  [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is selected. 
(
➜ 4)
PTY code: NEWS, INFORM (information), SPORTS, TALK, ROCK, CLS ROCK (classic rock), ADLT HIT 
(adult hits), SOFT RCK (softrock), TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA (nostalgia), JAZZ, 
CLASSICL (classical), R & B (rhythm and blues), SOFT R&B (soft rhythm and blues), LANGUAGE, 
REL MUSC (religious music), REL TALK (religious talk), PERSNLTY (personality), PUBLIC, COLLEGE, 
HABL ESP (Spanish talk), MUSC ESP (Spanish music), HIP HOP, WEATHER
“ST” lights up when 
receiving an FM stereo 
broadcast with sufficient 
signal strength.
ENGLISH
EN_KD-A645_R640_540_440[J]f.indd   5 EN_KD-A645_R640_540_440[J]f.indd   5 7/27/12   10:44:05 PM
7/27/12   10:44:05 PM 
						

							6
CD / USB / iPod
To Do this CD USB iPod
Select a track/file   Press E / F (or 2 / 3 on RM-RK52).
*2
Select a folder
(MP3/WMA)  Press 
1 ∞ / 2  5 (or 5 / ∞ on RM-RK52).—
Reverse/Fast-forward   Press and hold E / F (or 2 / 3 on RM-RK52).
*2
Select a track/file 
from a list1 Press  MENU2 Turn the volume knob to make a selection, then press the knob.
•  MP3/WMA file: Select the desired folder, then a file.
•  iPod or JVC Playlist Creator (JPC) / JVC Music Control (JMC) file*
3: Select 
the desired file from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, 
PODCASTS*
4, GENRES, COMPOSERS*4).
•  To return to the previous hierarchy, press G.
•  To cancel, press MENU.
  Note: Turn the volume knob quickly to fast-search.*5
Repeat play  Press 6  B repeatedly to make a selection.
•  Audio CD or JPC / JMC file: TRACK RPT, RPT OFF
•  MP3/WMA file: TRACK RPT, FOLDER RPT, RPT OFF
•  iPod: ONE RPT, ALL RPT
*5
Random play  Press 5 A repeatedly to make a selection.
•  Audio CD: ALL RND, RND OFF
•  MP3/WMA file or JPC / JMC file: FOLDER RND, ALL RND, RND OFF
•  iPod: SONG RND, ALBUM RND *
6, RND OFF
*5
Start playback
CD
The source changes to CD and playback starts.•  To eject a disc, press 0.
USB
The source changes to USB and playback 
starts.
iPod/iPhone (
KD-A645 / KD-R640 / KD-R540 only)
The source changes to USB-IPOD and 
playback starts.
•  You can also change the source from the  other source to iPod by pressing iPod.
Press 4 iPod MODE repeatedly to select 
the control mode (
[HEAD MODE] / [IPOD 
MODE] / [EXT MODE]) directly.
• See also [IPOD SWITCH]. (➜ 4)
*1  Do not leave the cable inside the car  when not using.
Label side
USB input terminal USB input terminal USB 2.0 cable
*1 
(commercially available)
USB 2.0 cable
*1
(accessory of the iPod/iPhone)
KD-A645 / KD-R640
KD-R540
KD-A645 / 
KD-R640/
 :  Applicable
— :  Not applicable
*
4  Only for iPod.
*5 Applicable under [HEAD MODE] only. (➜ 4)*6  Not applicable for some iPod/iPhone.
*
2 Applicable under [HEAD MODE] and [IPOD MODE] only. (➜ 4)*3  Only for files registered in the database created with JPC / JMC. (➜ 11)
EN_KD-A645_R640_540_440[J]f.indd   6 EN_KD-A645_R640_540_440[J]f.indd   6
8/23/12   3:19:17 PM
8/23/12   3:19:17 PM 
						

							7
AUX
Use a portable audio player
1 Connect a portable audio player (commercially available).
 
2 Select [ON] for [AUX] in [SRC SELECT]. (➜ 4)3 Press L SOURCE to select AUX.4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio output.
Use a Bluetooth® device
1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased).
 
2 Register (pair) the Bluetooth device with KS-BTA100.3 Select [BT ADAPTER] for [AUX] in [SRC SELECT]. (➜ 4).4 Press L SOURCE to select BT AUDIO5 Start using the Bluetooth device.
For details, refer to the instruction manual of KS-BTA100.
3.5 mm (1/8") stereo mini plug with “L” 
shaped connector (commercially available)
Portable audio player
Auxiliary input jack
Auxiliary input jack Blue/white
Blue/white: Remote
Black Black: Ground
Brown Brown: Tel muting
Wiring harness of the unit 
(
➜ 15)
ILLUMINATION (KD-A645 / KD-R640 only)
1 Press and hold MENU.2 Turn the volume knob to select [COLOR] or [COLOR SETUP], then press the knob.3 Turn the volume knob to make a selection (see the table below), then p\
ress 
the knob.
4 Press MENU to exit.
Default: 
XX
COLOR:  Select a color for [BUTTON ZONE], [DISP ZONE], and [ALL ZONE] separately.
BUTTON ZONE
[COLOR 06]COLOR 01 to COLOR 29: The selected color is shown on the selected zone.
USER: The color you have created in [COLOR SETUP] is shown on the 
selected zone.
COLOR FLOW 01 to COLOR FLOW 03: Color changes at different speeds.
DISP ZONE
[COLOR 01]
ALL ZONE
[COLOR 06]The button and display illumination will change to the current or select\
ed 
[BUTTON ZONE] color.
COLOR SETUP
:  Store your own day and night colors for [BUTTON ZONE] and [DISP ZONE] separately.
DAY COLOR1  BUTTON ZONE / DISP ZONE: Select a zone.2 RED / GREEN / BLUE: Select a primary color.3 00 to 31: Select the level. 
Repeat steps 2 and 3 for all the primary colors.
•  Your setting is stored to [USER] in [COLOR].
• If  [00] is selected for all primary colors for [DISP ZONE], nothing appears 
on the display.
NIGHT COLOR
MENU COLOR
ON: Changes the display and buttons illumination when settings are 
performed on menu and list search. ; OFF: Cancels. 
[NIGHT COLOR]
 or [DAY COLOR] is changed by turning on or off your car’s headlight.
ENGLISH
EN_KD-A645_R640_540_440[J]f.indd   7 EN_KD-A645_R640_540_440[J]f.indd   7 8/23/12   3:19:18 PM
8/23/12   3:19:18 PM 
						

							8
Preparation:1 Connect the optional SiriusXM Connect 
Vehicle Tuner (commercially available).
 
2 Activate the subscription through 
www.siriusxm.com/activatenow or call 
1-866-635-2349.
   The Radio ID is required to activate the SiriusXM Connect Vehicle Tuner.
   The Radio ID is located on the label of the SiriusXM Connect Vehicle Tuner and can also 
be shown on the unit’s display window when 
you select “Channel 0” after SiriusXM Connect 
Vehicle Tuner is connected.
3 Press L   SOURCE to select SIRIUS XM to 
start updating.
Start listening
1 Press L   SOURCE to select SIRIUS XM.2 Press MENU.3 Turn the volume knob to select CATEGORY, 
then press the knob.
4  Turn the volume knob to select a category 
from the list, then press the knob.
   If “ALL CHANNEL” is selected, all the available 
channels will be shown. (
KD-A645 / KD-R640 only)
Expansion port on the rear panel
SiriusXM Connect 
Vehicle Tuner
Antenna
PANDORA® (KD-A645 / KD-R640 / KD-R540 only)
Preparation:
Install the latest version of the Pandora® application 
into your device (iPhone/iPod touch), then log in and 
create an account with Pandora®.
• Select 
[ON] for [PANDORA] in [SRC SELECT]. (➜ 4)
Start listening
1 Open the Pandora® application on your device.2 Connect your device to the USB input terminal.
 
   The source changes to PANDORA and broadcast  starts.
   *  Do not leave the cable inside the car when not  using.
About Pandora® internet radio
•  Pandora® is only available in the US.
•  Because Pandora® is a third-party service, the  specifications are subject to change without 
prior notice. Accordingly, compatibility may be 
impaired or some or all of the services may become 
unavailable.
•  Some functions of Pandora® cannot be operated  from this unit.
•  For issues using the application, please contact  Pandora at [email protected].
•  If the version of the OS of the connected iPhone is  earlier than 4.0, start the PANDORA internet radio 
application before selecting the PANDORA source.
To  Do this
Pause or resume 
playback   Press the volume knob.
Thumbs up or 
thumbs down  Press 
1 
 / 2 . •  If thumbs down is selected, the 
current track is skipped.
Skip a track  Press F.
Create a new 
station
1 Press MENU.2 Turn the volume knob to select 
[NEW STATION], then press the 
knob.
3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], 
then press the knob.
   A new station is created based on  the current song or artist.
Search for a 
registered 
station
1 Press MENU.2 Turn the volume knob to make a 
selection, then press the knob.
  [BY DATE]: According to the 
registered date.
  [A–Z]: Alphabetical order.3 Turn the volume knob to select 
the desired station, then press the 
knob.
Bookmark a 
song or artist 
information
1 Press and hold the volume knob.2 Turn the volume knob to select [THIS TRACK] or [THIS ARTIST], then 
press the knob.
   “BOOKMARKED” appears and the  information is stored to your device.
   The bookmark is available on your Pandora® account but not on this 
unit.
USB input terminal
USB 2.0 cable* 
(accessory of the iPhone/iPod touch)
SiriusXM™
EN_KD-A645_R640_540_440[J]f.indd   8 EN_KD-A645_R640_540_440[J]f.indd   8 7/24/12   12:21:24 PM
7/24/12   12:21:24 PM 
						

							9
5 Turn the volume knob to select a channel, then press the knob. (or)
 Press  E / F to search for a channel manually.
 •  Pressing and holding E / F changes the channel rapidly.
If a locked channel or a mature channel (
[MATURE CH] is set to [ON]) is selected, a 
pass code input screen appears. Enter the pass code to receive the chann\
el.
• To store a channel: You can store up to 18 channels. (➜ 5)• To select a stored channel: Press one of the number buttons (1 to 6). (or) 1 Press  MENU. 2  Turn the volume knob to select PRESET, then press the knob. 3 Turn the volume knob to select a preset number, then press the knob. (or)
 Press  5 / ∞ on RM-RK52.
Replay
1 Press the volume knob.2 Press again the volume knob to start Replay.   Replay starts from the live position and “” lights up.
During Replay...
•  To pause or resume playback, press the volume knob.
•  To skip the current song backward/forward, press E /  F.
•  To rewind/fast-forward, press and hold E /  F.
•  To exit from Replay and go to live, press G.
Other settings
1 Press and hold MENU.2 Turn the volume knob to select [SIRIUS XM], then press the knob.3 Turn the volume knob to make a selection (see table on the right), the\
n press 
the knob.
4 Press MENU to exit.
Default: XX
CH LOCK To unlock settings:1  Turn the volume knob to select a number.2 Press E / F to move to the entry position.3 Repeat steps 1 and 2 to enter the current pass code. (Initial pass code is 
0000.)
4  Press the volume knob to confirm.
CODE SET
1  Turn the volume knob to select a number.2 Press E / F to move to the entry position.3 Repeat steps 1 and 2 to enter a new 4-digit pass code.4  Press the volume knob to confirm.5 Repeat steps 1 to 4 to reconfirm the new pass code.
•  Make a note of the new pass code to enter channel lock settings from nex\
t time.
CH EDIT
 * 1 Turn the volume knob to select a category, then press the knob.2 Turn the volume knob to select a channel you want to lock, then press the\
 
knob.
 “L” appears in front of the channel number.3 Press G to exit.
CH CLEAR
 *YES: Clears all the locked channels. ; NO: Cancels.
MATURE CH
ON: Turns on the Sirius XM-defined lock setting (mature channel). ; 
OFF: Turns off.
• If  [ON] is selected, your setting (CH EDIT) is temporary ignored.
SIGNAL LVLNO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current 
received signal.
BUF USAGE
0% — 100% (0): Shows the memory usage for Replay buffer.
*  Displayed only when [MATURE CH] is set to [OFF].
SiriusXM™
ENGLISH
EN_KD-A645_R640_540_440[J]f.indd   9 EN_KD-A645_R640_540_440[J]f.indd   9 7/24/12   12:21:24 PM
7/24/12   12:21:24 PM 
						

							10
AUDIO SETTINGS
ToDo this
Select a preset 
equalizer
 Press EQ repeatedly.  FLAT (default), NATURAL, DYNAMIC, VOCAL BOOST, BASS BOOST, USER
Store your own 
sound settings1 Press and hold EQ.2 Turn the volume knob to make a selection, then press the knob.
  SUB.W *1:  –08 to +08  Default:  (00)   BASS LVL:  –06 to +06    (00)   MID LVL:  –06 to +06   (00)   TRE LVL:  –06 to +06   (00)
•  The setting is stored to [USER] in EQ.
•  To return to the previous item, press G.
•  To exit, press EQ.
*
1  Displayed only when [L/O MODE] is set to [SUB.W] and [SUB.W] is set to [ON].
Other settings
1 Press and hold MENU.2 Turn the volume knob to select [PRO EQ] or [AUDIO], then press the knob.3 Turn the volume knob to make a selection (see the table below), then p\
ress the knob.  Repeat step  3 until the desired item is selected.4 Press MENU to exit.
PRO EQ1 BASS / MIDDLE / TREBLE: Select a sound tone.2  Adjust the sound elements of the selected sound tone. BASS Frequency:  60/ 80/ 100/ 200 Hz Default: (80 Hz)
   Level:  –06 to +06  (00)
   Q:  Q1.0/ Q1.25/ Q1.5/ Q2.0   (Q1.0)
 MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz Default: (1.0 kHz)
   Level:  –06 to +06  (00)
   Q:  Q0.75/ Q1.0/ Q1.25  (Q1.25)
 TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
   Level:  –06 to +06  (00)
   Q:  Q FIX   (Q FIX)
The setting is stored to [USER] in EQ.
Default: XX
AUDIO
FADER
*2 *3R06 — F06 (00): Adjusts the front and rear speaker output 
balance. 
BALANCE
  *3L06 — R06 (00): Adjusts the left and right speaker output balance. 
BASS BOOST
+01 / +02: Selects your preferred bass boost level.  ; OFF: Cancels. 
LOUD
LOW / HIGH: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ; OFF: Cancels. 
VOL ADJUST
–05 — +05 (00): Presets the volume adjustment level of each 
source (compared to the FM volume level). Before adjustment, 
select the source you want to adjust. (“VOL ADJ FIX” appears if F\
M 
is selected.) 
L/O MODE
SUB.W / REAR: Selects whether rear speakers or a subwoofer are 
connected to the REAR/SW line out terminals on the rear panel 
(through an external amplifier).
SUB.W
  *4ON / OFF: Turns on or off the subwoofer output. 
SUB.W LPF 
*5THROUGH: All signals are sent to the subwoofer.  ; LOW 55Hz / 
MID 85Hz / HIGH 120Hz: Audio signals with frequencies lower 
than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. 
SUB.W LEVEL  *5–08 — +08 (00): Adjusts the subwoofer output level. 
BEEP
ON / OFF: Activates or deactivates the keypress tone. 
TEL MUTING  *6ON: Mutes the sounds while using the cellular phone (not connected 
through KS-BTA100). ; OFF: Cancels. 
AMP GAIN
LOW POWER: Limits the maximum volume level to 30. (Select if 
the maximum power of each speaker is less than 50 W to prevent 
damaging the speakers.) ; HIGH POWER: The maximum volume 
level is 50. 
*2  If you are using a two-speaker system, set the fader level to [00] . 
*3  This adjustment will not affect the subwoofer output. 
*4  Displayed only when [L/O MODE] is set to [SUB.W].
*5  Displayed only when [SUB.W] is set to [ON].
*6  Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT].
EN_KD-A645_R640_540_440[J]f.indd   10 EN_KD-A645_R640_540_440[J]f.indd   10 7/24/12   12:21:24 PM
7/24/12   12:21:24 PM