Home > InFocus > Projector > InFocus Projector IN134UST User Manual

InFocus Projector IN134UST User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector IN134UST User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							IN134UST/IN136UST User’s Manual 
    Projector Dimensions 
    — 54 — 
    160.0
    122.58
    374.51
      
    						
    							IN134UST/IN136UST User’s Manual 
    – 55  – 
    REGULATORY COMPLIANCE 
    FCC Warning 
    This equipment has been tested and found to comply  with the limits for a Class B digital device 
    pursuant to Part 15 of the FCC Rules. These  limits are designed to provide reasonable protection 
    against harmful interference when the equipm ent is operated in a commercial environment. 
    This equipment generates, uses, and  can radiate radio frequency energy and, if not installed and 
    used in accordance with the instruction manual , may cause harmful interference to radio 
    communications. Operation of this equipment in  a residential area is likely to cause harmful 
    interference in which case the user will be required  to correct the interference at his/her own expense. 
    Changes or modifications not expressly approved  by the parties responsible for compliance could 
    void the user’s authority to operate the equipment. 
    Canada 
    This class B digital apparatus complies with Canadian ICES-003. 
    Safety Certifications 
    FCC, UL/cUL, CE, CCC, KC, UL-S, TUV/GS, EC A-PCT, SASO, SABS, PSB, CECP, NOM, C-Tick  
    						
    							IN134UST/IN136UST User’s Manual 
    — 56 — 
    APPENDIX I 
    Communication 
    The following table describes the serial comm unication configuration that should be used when 
    interfacing to the CLI via the serial port. 
    Windows HyperTerminal or Procomm are two tool s that can be used to send CLI commands across 
    the serial port. 
    Setting Value 
    Bits per second  19200 
    Data bits 8 
    Parity None 
    Stop bits 1 
    Flow control None 
    Emulation VT100 
     
    No Function Command RWMinMaxDefaultStepParameter 
    1 AC Power On 
    (Auto power on)  APO RW 0 1 0 1 0: Disable; 1: Enable 
    3 Aspect Ratio 
    ARZ RW 0 4  0  1 
    0:Fill 
    1:4:3 
    2:16:9 
    3:Letterbox 
    4:Native 
    4 Auto Image  AIM W n/a 1  1  1 1: Enable 
    5 Auto Off Time  AOT RW 0 36 6  1 
    0: Never 
    1: 5min 
    2,3…5, 
    6: 30min (Default 6*5=30) 
    7,8…35, 
    36: 180min 
    6 Auto Source  ASC RW 0 1  1  1 0: Disable; 1: Enable 
    7 Blank Screen  BLK RW 0 1  0  1 0: Disable; 1: Enable 
    9 Brightness  BRT RW 0 100 50  1 Display Mode=User only 
    11 Ceiling  
    (Projection mode)  CEL RW 0 3 0 1 
    0:Front 
    1:Rear  
    2:Ceiling  
    3:Ceiling+Rear 
    12 Closed Captions: Non- 
    Muted  CLC RW 0 1 0 1 Off 
    On (CC1) 
    14 Color 
    CLR RW 0 100 50  1 Video SVideo only = satura-
    tion 
    15 Color Space  CSM RW 0 2  0  1 
    Display Mode=User only 
    0:Auto  
    1:RGB 
    2:YUV  
    						
    							IN134UST/IN136UST User’s Manual 
    – 57  – 
    No Function Command RWMinMaxDefaultStepParameter 
    16 Color Temp  TMP RW 0 3 Source 
    Specific 1 
    Display Mode=User only 
    0:Native 
    1:Warm 
    2:Normal  
    3:Cold 
    17 Contrast 
    CON RW 0 100 50  1 Display Mode=User only 
    18 Current Source  SRC RW 0 4  0  1 
    0:VGA1 
    1:VGA2 
    5:HDMI  
    12:Composite 
    13:S-Video 
    21 Digital Zoom  DZM RW -1010 0  5 -10~10 
    27 Error Condition  ERR R n/an/a n/a  n/a 
    0:No error 
    1:Lamp not lit after 5 At-
    tempts 
    3:Lamp went out unexpect-
    edly 
    4:Fan failure 
    5:Overheating 
    8:DMD error 
    9:Color wheel 
    28 Factory Reset  RST W n/a 1  1  1 1:Reset 
    32 Freeze Screen  FRZ RW 0 1  0  1 0: Disable 
    34 Gamma  GTB RW 0 4 Source 
    Specific 1 
    Display Mode=User only 
    0:PC  
    1:MAC  
    2:Video  
    3:Chart 
    4:B&W  
    40 Horz. Position 
    HPS RW x x  0  1 RGB source only 
    (HPS?) to get range 
    45 Lamp Hours in High 
    Power (Normal) Mode  LMO R 0 9999  
    Displays the numbers of 
    hours that the lamp has run 
    in High Power (Normal) 
    mode. 
    46 Lamp Hours in Low 
    Power (Eco) Mode  LME R 0 9999  
    Displays the numbers of 
    hours that the lamp has run 
    in Low Power (Eco) mode.
    47 Lamp Life 
    LIF R n/a5000   230W lamp life 5000 
    49 Lamp Resets (Total 
    number)  LMR R 0 99990 1  
    62 
    Lamp Low Power  IPM RW 0 1  0  1 1=Normal, 0=Bright  
    						
    							IN134UST/IN136UST User’s Manual 
    — 58 — 
    No Function Command RWMinMaxDefaultStepParameter 
    63 Language  LAN RW 0 20 0  1 
    0:English 
    1:French 
    2:German 
    3:Spanish 
    4: Simp Chinese 
    5: Trad Chinese 
    6: Italian 
    7: Norwegian 
    8: Swedish 
    9: Dutch 
    10:Russian 
    11: Finnish 
    12: Korean 
    13: Arabic 
    14: Turkish 
    15: Japanese 
    16: Brazilian Portuguese 
    17: Vietnamese 
    18:Danish 
    19:Polish 
    20: Bahasa Indonesian 
    21: Persian 
    77 Menu  MNU RW 0 1  0  1 0: Clear; 1: Display 
    79 Menu Navigation  NAV W 0 5  n/a  1 
    0:Menu Key 
    1:Up Key 
    2:Down Key 
    3:Select Key 
    4:Left Key 
    5:Right Key 
    81 Menu Transparency  TOE RW 0 4  0  5 
    0:0% 
    1:25% 
    2:50% 
    3:75% 
    4:100% 
    91 Mute  MTE RW 0 1  0  1 0:disable; 1:enable 
    103 Overscan  OVS RW 0 1  0  1 0:disable, 1:enable 
    104 Phase(Frequency)  MSS RW 0 31 x  1 RGB source only 
    108 Power  PWR RW 0 1  0  1 0:Turn Off 
    1:Turn On 
    111 Presets  PST RW 0 6 source 
    Specific 1 
    0:Presentation 
    1:Bright 
    2:Game 
    3:Movie 
    4:TV 
    5:sRGB 
    6:User 
    114 
    Projector Firmware Ver.  FVS R string       LX136-445IF-DPXXX 
    LX176-445IF-DPXXX 
    115  Projector High Power 
    (Normal) Hours  LTO R 0 9999
         
    Displays the numbers of 
    hours that the projector has 
    run in High Power (Normal) 
    mode over its life (including 
    all lamps). 
    116 Projector Info menu  PRI R  1    1 Display Projector Info menu 
    						
    							IN134UST/IN136UST User’s Manual 
    – 59  – 
    No Function Command RWMinMaxDefaultStepParameter 
    117  Projector Low Power 
    (Eco) Hours  LTE R 0 9999
         
    Displays the numbers of 
    hours that the projector has 
    run in Low Power (Eco) 
    mode over its life (including 
    all lamps). 
    118 Projector Model  MDL R string       IN134UST / IN136UST 
    119 Projector Resolution  NRS R string       XGA / WXGA 
    121  Projector Total Hours  LMT R 0 9999   1   
    123  Reset Lamp Hours  LRT RW 1 2  n/a  1 Reset Lamp Hour(Status, 
    MFG:current) 
    126 Search Screen  DSU RW 0 4  0  1 
    0:Black 
    1:Red 
    2.Green 
    3.Blue 
    4.White 
    130 Sharpness  SHP RW 0 100 50  1  
    155 System State  SYS R 0 18 0  1 
    0: Standby 
    2: Start Up 
    12: Cooling 
    18: Error 
    158 Tint  TNT RW 0 100 50  1   
    160 Tracking  MTS RW -5 5  0  1 RGB source only 
    -5~5 
    162 Vert. Keystone  DKV RW -4040 0  1   
    164 Vert. Position  VPS RW x x  0  1 
    RGB source only 
    (VPS?) to get range 
    (VPS+) 
    (VPS-) 
    167 Volume  VOL RW 0 8  4  1 0~8 
      
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector IN134UST User Manual