Icom Ic-r3 Communications Reciever Instruction Manual
Have a look at the manual Icom Ic-r3 Communications Reciever Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Icom manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
22
6SCAN OPERATION
Skip channel setting
Memory channels can be set to be skipped for memory skip
scan. In addition, memory channels can be set to be skipped
for both memory skip scan and frequency skip scan. These
are useful to speedup the scan interval.
qSelect memory mode with [V/M].
wRotate [DIAL] to select a memory channel to be pro-
grammed as a skip channel.
eWhile pushing [FUNC], push [(V/M) SKIP] one or more
times to select a condition.
•No indication : channel will not be skipped.
•“SKIP” or...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-25.png "Page 26
22
6SCAN OPERATION
Skip channel setting
Memory channels can be set to be skipped for memory skip
scan. In addition, memory channels can be set to be skipped
for both memory skip scan and frequency skip scan. These
are useful to speedup the scan interval.
qSelect memory mode with [V/M].
wRotate [DIAL] to select a memory channel to be pro-
grammed as a skip channel.
eWhile pushing [FUNC], push [(V/M) SKIP] one or more
times to select a condition.
•No indication : channel will not be skipped.
•“SKIP” or...")
![Page 27
23
6SCAN OPERATION
ePush [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan pause time.
•“2SEC”–“20SEC”: scan pauses for 2–20 sec. on a received sig-
nal.
•“HOLD”: scan pauses on a received signal until it dis-
appears.
rPush [(MODE) SET] to exit set mode.
◊Setting the scan resume time
The scan restarts after a signal disappears according to the
resume time. It can be set from 0–5 sec. or unlimited.
qPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-26.png "Page 27
23
6SCAN OPERATION
ePush [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan pause time.
•“2SEC”–“20SEC”: scan pauses for 2–20 sec. on a received sig-
nal.
•“HOLD”: scan pauses on a received signal until it dis-
appears.
rPush [(MODE) SET] to exit set mode.
◊Setting the scan resume time
The scan restarts after a signal disappears according to the
resume time. It can be set from 0–5 sec. or unlimited.
qPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band...")
![Page 28
24
6SCAN OPERATION
Frequency skip function
◊Programming a skip frequency
Unwanted frequencies can be skipped and programmed as
skip channels when full scan, band scan or programmed scan
is pausing.
qStart full scan, band scan or programmed scan. (p. 19)
wWhile receiving an unwanted signal and scan pauses,
push [FUNC] + [(V/M) SKIP] for 2 sec. to program the re-
ceived frequency as a skip frequency.
•The receiver emits 3 beeps and the scan resumes.
•Non-programmed memory channels (blank channels) are...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-27.png "Page 28
24
6SCAN OPERATION
Frequency skip function
◊Programming a skip frequency
Unwanted frequencies can be skipped and programmed as
skip channels when full scan, band scan or programmed scan
is pausing.
qStart full scan, band scan or programmed scan. (p. 19)
wWhile receiving an unwanted signal and scan pauses,
push [FUNC] + [(V/M) SKIP] for 2 sec. to program the re-
ceived frequency as a skip frequency.
•The receiver emits 3 beeps and the scan resumes.
•Non-programmed memory channels (blank channels) are...")
![Page 30
26
7PRIORITY WATCH
Priority watch operation
◊Memory channel watch and memory scan
watch
qSelect VFO mode; then, set an operating frequency.
wSet the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [↔] for 2 sec. to start
memory scan.
ePush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
rRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-29.png "Page 30
26
7PRIORITY WATCH
Priority watch operation
◊Memory channel watch and memory scan
watch
qSelect VFO mode; then, set an operating frequency.
wSet the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [↔] for 2 sec. to start
memory scan.
ePush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
rRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears...")
![Page 31
◊VFO scan watch
qSelect the desired memory channel to be watched.
wPush [V/M] to select VFO mode.
ePush [↔] for 2 sec. to start full scan, band scan or pro-
grammed scan. (p. 19)
rPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
tRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when
color LCD is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to
select priority watch ON...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-30.png "Page 31
◊VFO scan watch
qSelect the desired memory channel to be watched.
wPush [V/M] to select VFO mode.
ePush [↔] for 2 sec. to start full scan, band scan or pro-
grammed scan. (p. 19)
rPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
tRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when
color LCD is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to
select priority watch ON...")
![Page 32
28
8SUBAUDIBLE TONE OPERATION
Tone squelch operation
◊Operation
The tone squelch opens only when receiving a signal con-
taining a matching subaudible tone. You can silently wait for
calls from group members using the same tone in an ama-
teur band.
qSet the operating frequency in FM mode.
wSet the desired subaudible tone in set mode.
•See the following section for programming.
ePush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
rRotate...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-31.png "Page 32
28
8SUBAUDIBLE TONE OPERATION
Tone squelch operation
◊Operation
The tone squelch opens only when receiving a signal con-
taining a matching subaudible tone. You can silently wait for
calls from group members using the same tone in an ama-
teur band.
qSet the operating frequency in FM mode.
wSet the desired subaudible tone in set mode.
•See the following section for programming.
ePush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
rRotate...")
![Page 33
•Each operating band and each memory channel have indepen-
dent settings.
wPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
eRotate [DIAL] until “Tone Freq.” or “tonE” appears.
•“tonE” disappears after 1 sec. and “Ct” appears.
rPush [↔] or rotate the tuning dial while pushing [FUNC] to
select a subaudible tone.
tPush [(MODE) SET] to exit set mode.
•Available subaudible tone frequencies (unit: Hz)](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-32.png "Page 33
•Each operating band and each memory channel have indepen-
dent settings.
wPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
eRotate [DIAL] until “Tone Freq.” or “tonE” appears.
•“tonE” disappears after 1 sec. and “Ct” appears.
rPush [↔] or rotate the tuning dial while pushing [FUNC] to
select a subaudible tone.
tPush [(MODE) SET] to exit set mode.
•Available subaudible tone frequencies (unit: Hz)")
![Page 34
30
8SUBAUDIBLE TONE OPERATION
tRotate [DIAL] until “Tone Squelch” or “tSqL” appears.
•“tSqL” disappears after 1 sec. and “to” appears when color LCD
is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to
select “P BEEP” (pocket beep).
uPush [(MODE) SET] to exit set mode and start the pocket
beep.
•“P. B” or “T SQLë” appears in the function display.
iWhen a signal with the correct tone is received, the re-
ceiver emits beep tones for 30 sec. and flashes “P. B” or
“ë.”
oPush [SQL] to stop the...](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-33.png "Page 34
30
8SUBAUDIBLE TONE OPERATION
tRotate [DIAL] until “Tone Squelch” or “tSqL” appears.
•“tSqL” disappears after 1 sec. and “to” appears when color LCD
is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to
select “P BEEP” (pocket beep).
uPush [(MODE) SET] to exit set mode and start the pocket
beep.
•“P. B” or “T SQLë” appears in the function display.
iWhen a signal with the correct tone is received, the re-
ceiver emits beep tones for 30 sec. and flashes “P. B” or
“ë.”
oPush [SQL] to stop the...")
![Page 36
32
9DUPLEX OPERATION
◊Offset frequency
During duplex operation, the transmit station frequency is
shifted from the receive station frequency by an amount de-
termined by the offset frequency.
qSelect VFO mode or desired memory channel to be pro-
grammed.
wPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
eRotate [DIAL] until “Offset Freq.” or “oFFSEt” appears.
•“oFFSEt” disappears after 1 sec. and “oW” appears when the
color LCD is OFF....](http://img.usermanuals.tech/thumb/2452/82811/w64_icom_r3-comms-scanner-reciever_manual_d-35.png "Page 36
32
9DUPLEX OPERATION
◊Offset frequency
During duplex operation, the transmit station frequency is
shifted from the receive station frequency by an amount de-
termined by the offset frequency.
qSelect VFO mode or desired memory channel to be pro-
grammed.
wPush [FUNC] + [(MODE) SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
eRotate [DIAL] until “Offset Freq.” or “oFFSEt” appears.
•“oFFSEt” disappears after 1 sec. and “oW” appears when the
color LCD is OFF....")
◊VFO scan watch qSelect the desired memory channel to be watched. wPush [V/M] to select VFO mode. ePush [↔] for 2 sec. to start full scan, band scan or pro- grammed scan. (p. 19) rPush [FUNC] + [(MODE) SET] momentarily to enter set mode. •Select a non-band scope screen in advance for color LCD. tRotate [DIAL] to select “Priority” or “PRIo.” •“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when color LCD is OFF. yPush [↔] or rotate the tuning dial while pushing [FUNC] to select priority watch ON or priority watch ON with alert (BELL). •If the pocket beep function is activated, the receiver automati- cally selects the tone squelch function when the priority watch is selected. uPush [(MODE) SET] to exit set mode and start the watch. •The receiver checks the memory channel frequency every 5 sec. •The watch resumes according to the selected scan resume con- dition. (p. 22) •If the priority watch with alert is ON, you can be alerted with beeps and a flashing “P. B” or “ë.” •If the direction finding screen is selected, the receiver automati- cally selects the simple screen when the priority watch starts. iPush [V/M] while the display shows the VFO frequency to stop the watch. FMPRIO RXS1 3 5 7 9 VOLRX FM 145.765.000M:A18 PRIO ALL TS15.0 While pausing on the memory channel, “PRIO” flashes. Priority watch set mode Pause Scan : 10SEC Priority : OFF Beep Audio : VOLUME Light : AUTO A.Power OFF : OFFPause Scan : 10SEC Priority : ON Beep Audio : VOLUME Light : AUTO A.Power OFF : OFFPause Scan : 10SEC Priority : BELL Beep Audio : VOLUME Light : AUTO A.Power OFF : OFF Priority watch is ON. Priority watch with alert is ON. 27 7PRIORITY WATCH
28 8SUBAUDIBLE TONE OPERATION Tone squelch operation ◊Operation The tone squelch opens only when receiving a signal con- taining a matching subaudible tone. You can silently wait for calls from group members using the same tone in an ama- teur band. qSet the operating frequency in FM mode. wSet the desired subaudible tone in set mode. •See the following section for programming. ePush [FUNC] + [(MODE) SET] momentarily to enter set mode. •Select a non-band scope screen in advance for color LCD. rRotate [DIAL] until “Tone Squelch” or “tSqL” appears. •“tSqL” disappears after 1 sec. and “to” appears when color LCD is OFF. tPush [↔] or rotate the tuning dial while pushing [FUNC] to select “TSQL” (tone squelch). yPush [(MODE) SET] to exit set mode and start the tone squelch. uWhen the received signal includes a matching tone, the squelch opens and the signal can be heard. •When the received signal’s tone does not match, tone squelch does not open, however, the S-indicator shows signal strength. •To open the squelch manually, push and hold [SQL]. (default) iTo cancel the tone squelch, repeat steps e–yas de- scribed above and select “OFF” in step t. ◊Setting subaudible tones for tone squelch operation qSelect VFO mode or desired memory channel to be pro- grammed. Tone function set mode Tone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: TSQL Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SEC Tone squelch OFF Tone squelch ON
•Each operating band and each memory channel have indepen- dent settings. wPush [FUNC] + [(MODE) SET] momentarily to enter set mode. •Select a non-band scope screen in advance for color LCD. eRotate [DIAL] until “Tone Freq.” or “tonE” appears. •“tonE” disappears after 1 sec. and “Ct” appears. rPush [↔] or rotate the tuning dial while pushing [FUNC] to select a subaudible tone. tPush [(MODE) SET] to exit set mode. •Available subaudible tone frequencies (unit: Hz)
30 8SUBAUDIBLE TONE OPERATION tRotate [DIAL] until “Tone Squelch” or “tSqL” appears. •“tSqL” disappears after 1 sec. and “to” appears when color LCD is OFF. yPush [↔] or rotate the tuning dial while pushing [FUNC] to select “P BEEP” (pocket beep). uPush [(MODE) SET] to exit set mode and start the pocket beep. •“P. B” or “T SQLë” appears in the function display. iWhen a signal with the correct tone is received, the re- ceiver emits beep tones for 30 sec. and flashes “P. B” or “ë.” oPush [SQL] to stop the beeps and flashing. •Tone squelch is automatically selected. Tone scan The receiver can detect the subaudible tone frequency in a received signal. By monitoring a signal that is being transmit- ted on a frequency, you can check the tone frequency re- quired to access the repeater, or to open the tone squelch. qSet the desired frequency or memory channel to be checked for a tone frequency. wSelect FM mode with [MODE]. ePush [FUNC] + [↔] for 2 sec. to start the tone scan. •To change the scanning direction, rotate [DIAL]. rWhen the tone frequency is detected, the set mode con- tents are programmed with the tone frequency. •The tone scan pauses when a tone frequency is detected. •The detected tone frequency is used for the tone squelch fre- quency. •“Ct” appears during tone scan. tPush [↔] to stop the scan. flashes when correct tone is received. TSQLFM P S1 3 5 7 9 VOLRX FM P.B 146.100.000 TS15.0 RX
31 9DUPLEX OPERATION Duplex communication uses 2 different frequencies for trans- mitting and receiving. Generally, duplex is used in communi- cation through a repeater, some utility communications, etc. During duplex operation, the transmit station frequency is shifted from the receive station frequency by the offset fre- quency. Repeater information (offset frequency and shift di- rection) can be programmed into memory channels. (p. 14) This function is not available in the broadcast band (0.495 –1.620 MHz) except for U.S.A. and Canada versions. qSet the receive station frequency (repeater output fre- quency). wSet the shift direction and offset of the transmit station fre- quency as described below. ePush and hold [SQL] to monitor the transmit station fre- quency (repeater input frequency) directly.◊Duplex shift direction qPush [FUNC] + [(MODE) SET] momentarily to enter set mode. •Select a non-band scope screen in advance for color LCD. wRotate [DIAL] until “Duplex” or “dUP” appears. •“dUP” disappears after 1 sec. and “dP” appears when color LCD is OFF. ePush [↔] or rotate the tuning dial while pushing [FUNC] to select “–DUP” or “(+)DUP.” •“–DUP” or “(+)DUP” indicates the transmit station frequency for minus shift or plus shift, respectively. rPush [(MODE) SET] to exit set mode. Duplex direction set mode Tone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: OFF Tone Freq. : 88.5 Duplex : -DUP Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: OFF Tone Freq. : 88.5 Duplex : +DUP Offset Freq.: 0.600 Scan Resume : 2SEC Minus shiftPlus shiftFM P S1 3 5 7 9 VOL FM 146.100.000 TS15.0 DUP –DUP
32 9DUPLEX OPERATION ◊Offset frequency During duplex operation, the transmit station frequency is shifted from the receive station frequency by an amount de- termined by the offset frequency. qSelect VFO mode or desired memory channel to be pro- grammed. wPush [FUNC] + [(MODE) SET] momentarily to enter set mode. •Select a non-band scope screen in advance for color LCD. eRotate [DIAL] until “Offset Freq.” or “oFFSEt” appears. •“oFFSEt” disappears after 1 sec. and “oW” appears when the color LCD is OFF. rPush [↔] or rotate the tuning dial while pushing [FUNC] to set the desired offset. •The offset frequency changes according to the selected tuning step. (p. 8) tPush [(MODE) SET] to exit set mode. Offset frequency set mode Tone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 0.600 Scan Resume : 2SECTone Squelch: OFF Tone Freq. : 88.5 Duplex : OFF Offset Freq.: 7.600 Scan Resume : 2SEC 0.6 MHz (600 kHz) offset7.6 MHz offset
33 10BAND SCOPE The band scope function allows you to visually check a spec- ified frequency range. Sweep range can be selected from ±5 kHz through ±500 kHz. Receive audio is muted while monitoring the band scope. Push [SQL] to cancel sweeping and receive the audio. qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON. wPush [FUNC] + [↕] one or more times to select the band scope screen. eSet the desired frequency as band scope center frequency. rPush [FUNC] + [V/M] momentarily to select the sweep range, if desired. •5, 10, 20, 100 and 500 kHz sweep ranges are available. tPush [FUNC] + [V/M] momentarily to start a sweep once or push them for 2 sec. to start sweeping continuously. •Signal conditions (strengths) appear starting from the center of the range. •Push [SQL] to cancel sweeping. yRotate [DIAL] to set the highlighted cursor to the desired waveform and set the frequency of the signal. •Start sweeping to set the selected frequency to the center fre- quency. FM 146.100.000TS= 25.0 SWEEP-500k S1 3 5 7 9 VOLSweep range
34 11TV OPERATION TV operation The receiver can receive TV (NTSC or PAL depending on ver- sion). TV channels are preset depending on versions. The received video and audio can be output from [A/V OUT] if desired. ◊TV channel receiving qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON, if desired. •Only the audio part of the TV contents can be received. wPush [↔] one or more times to select the TV channel band. •“tV” and channel number appear in the sub LCD. •The squelch is automatically opened. Push [SQL] to toggle be- tween squelch open and audio mute conditions. eRotate [DIAL] to select the desired channel. •Rotate [DIAL] while pushing [FUNC] to select the skip channel. ◊Skip channel setting Unwanted channels can be skipped for rapid selection, etc. qRotate [DIAL] to select the channel to be skipped. •To clear the skip setting, rotate [DIAL] while pushing [FUNC] to select a skip channel. wWhile pushing [FUNC], push [(V/M) SKIP] for 2 sec. to tog- gle the condition between non-skip and skip channel. •No indication : channel will not be skipped. •“” appears : channel skipped during selection. To select a skip TV channel temporarily, rotate [DIAL] while pushing [FUNC]. ◊Automatic TV channel programming TV channels can be programmed automatically. qPush [FUNC] + [↔] for 2 sec. to start TV channel pro- gramming. wThe programming will automatically stop after scanning all channels. FM W RX
35 11TV OPERATION ◊TV frequency (AM TV) receiving You can set the TV frequency instead of channel selection, if desired. qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON, if desired. •The audio part of the TV contents can be received when the color LCD is turned OFF. wPush [↔] one or more times to select the band above 30 MHz. •TV receiving does not function for less than 30 MHz. ePush [FUNC] + [↕] one or more times to select the TV screen. •“tV” and frequency appear in the sub LCD. •The squelch is automatically opened. Push [SQL] to toggle be- tween squelch open and audio mute conditions. rRotate [DIAL] to set the desired frequency. •Push [↔] one or more times to select the band. •Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39) ◊TV frequency (AM TV) memory channel The receiver has 10 memory channels for storage of often- used TV (AM TV) frequencies. qSet the desired frequency with [DIAL]. •Push [↔] one or more times to select the band. •Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39) wPush [V/M] for 1 sec. to indicate memory channels. •Do not hold [V/M] for more than 2 sec., otherwise the previously selected memory channel will be overwritten. eRotate [DIAL] to select the desired channel. rPush [V/M] for 1 sec. to program. •Keep pushing for 2 sec. or more to automatically select the next memory channel, if desired. Memory programming after selection, memory transferring or memory clearing can be used as same manner of regu- lar memory channels. (pgs. 15, 16) FM W RX FM W RX
36 11TV OPERATION ATV operation The IC-R3 ATV-type can receive an amateur TV (FM TV) within 900–1300 and 2250–2450.095 MHz. The received video and audio can be output from [A/V OUT] if desired. (p. 5) qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON, if desired. •Only the audio part of the TV contents can be received. wPush [↔] one or more times to select the 1200 or 2400 MHz bands. ePush [FUNC] + [↕] one or more times to select the ama- teur TV screen. •“FtV” and frequency appear in the sub LCD. •The squelch is automatically opened. Push [SQL] to toggle be- tween squelch open and audio mute conditions. rRotate [DIAL] to set the desired frequency. The video display mode can be selected as positive and negative depending on the received signal. Push [MODE] to toggle the display mode, if desired. ◊ATV memory channel The receiver has 50 memory channels for storage of often- used ATV (Amateur TV) frequencies. qSet the desired frequency with [DIAL]. •Push [↔] to select the 1200 or 2400 MHz band. •Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39) wPush [V/M] for 1 sec. to indicate memory channels. •Do not hold [V/M] for more than 2 sec., otherwise the previously selected memory channel will be overwritten. eRotate [DIAL] to select the desired channel. rPush [V/M] for 1 sec. to program. •Keep pushing for 2 sec. or more to automatically select the next mem- ory channel, if desired. Memory programming after selection, memory transferring or memory clearing can be used as same manner of regu- lar memory channels. (pgs. 15, 16) ◊Sub carrier adjustment qPush [FUNC] + [↔] for 2 sec. to enter sub carrier set mode. wPush [↔] or rotate the tuning dial while pushing [FUNC] to adjust sub carrier for better audio re- ceiving. ePush [↔] to exit sub carrier set mode.FM W RX FM W RX RX