HP Pavilion 15 Bc200 Notebook Pc Manual

							System boardDescriptionSpare part numberSystem board Intel i7-6700HQ system board with a non-Windows operating system856673-001Intel i7-6700HQ system board with a Windows operating system856673-601Intel i5-6300HQ system board with a non-Windows operating system856674-001Intel 2GB i5-6300HQ system board with a Windows operating system856674-601Intel i3-6100H system board with a non-Windows operating system856675-001Intel i3-6100H system board with a Windows operating system856675-601Intel i7-6700HQ system board with a non-Windows operating system856676-001Intel i7-6700HQ system board with a Windows operating system856676-601Intel i5-6300HQ system board with a non-Windows operating system856677-001Intel i5-6300HQ system board with a Windows operating system856677-601Intel i7-6700HQ system board with a non-Windows operating system856678-001Intel i7-6700HQ system board with a Windows operating system856678-601Intel i5-6300HQ system board with a non-Windows operating system856679-001Intel i5-6300HQ system board with a Windows operating system856679-601Intel i7-7700HQ system board with 2GB discrete memory GTX1050M and a non-Windows operating system914770-001Intel i7-7700HQ system board with 2GB discrete memory GTX1050M and a Windows operating system914770-601Intel i5-7300 system board with 2GB discrete memory GTX1050M and a non-Windows operating system914771-001Intel i5-7300 system board with 2GB discrete memory GTX1050M and a Windows operating system914771-601Intel i7-7700HQ system board with 4GB discrete memory GTX1050M and a non-Windows operating system914772-001Intel i7-7700HQ system board with 4GB discrete memory GTX1050M and a Windows operating system914772-601Intel i5-7300 system board with 2GB discrete memory GTX1050M and a non-Windows operating system914773-001Intel i5-7300 system board with 2GB discrete memory GTX1050M and a Windows operating system914773-601IMPORTANT:Make special note of each screw and screw lock size and location during removal 
and replacement.
Before removing the system board, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by 

						

							a.Display assembly (see Display assembly on page 29).
b.Hard drive (see Hard drive on page 31).
c.SSD (see SSD (M.2) on page 33).
d.Memory (see Memory on page 34).
e.WLAN module (see WLAN module on page 37).
f.Battery (see Battery on page 39).
g.USB (see USB board on page 42).
h.Power button board (see Power button board on page 43).
i.Fan (see Fan on page 45).
j.Heat sink for discrete graphics (see Heat sink for discrete graphics memory on page 46).
k.Heat sink for CPU and graphics (see Heat sink for CPU and graphics on page 48).
Remove the system board:
1.Disconnect the following zero-insertion force (ZIF) connectors from the system board:.


						

							2.Remove 1 Phillips 2x5 screw (1), lift the system board (2), and then remove it (3).
Reverse this procedure to install the system board.
RTC battery
DescriptionSpare part numberRTC battery741976-001IMPORTANT:Make special note of each screw and screw lock size and location during removal 
and replacement
Before removing the RTC battery, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by 

						

							v.WLAN module (see WLAN module on page 37).
vi.Battery (see Battery on page 39).
vii.USB (see USB board on page 42).
viii.Power button board (see Power button board on page 43).
ix.Fan (see Fan on page 45).
x.Heat sink for discrete graphics (see Heat sink for discrete graphics memory on page 46).
xi.Heat sink for CPU and graphics (see Heat sink for CPU and graphics on page 48).
xii.System board (see System board on page 53).
Remove the RTC battery:

xDisconnect the RTC battery (1), and then lift to remove it (2).
Reverse this procedure to install the RTC battery.
Power connector
DescriptionSpare part numberPower connector, DC-IN CAL50 8p 4.5mm90W 8P15 SF808155-010IMPORTANT:Make special note of each screw and screw lock size and location during removal 
and replacement
Before removing the power connector, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
56Chapter 5   Removal and replacement procedures for authorized service provider parts  
						

							3.Disconnect the power from the computer by 

						

							TouchPadDescriptionSpare part numberTouchPad board860363-001TouchPad cable858967-001Top cover with TouchPad and Backlit Keyboard in Natural Silver 

						

							f.Battery (see Battery on page 39).
g.USB (see USB board on page 42).
h.Power button board (see Power button board on page 43).
i.Fan (see Fan on page 45).
j.Heat sink for discrete graphics (see Heat sink for discrete graphics memory on page 46).
k.Heat sink for CPU and graphics (see Heat sink for CPU and graphics on page 48).
l.System board (see System board on page 53).
m.RTC battery (see RTC battery on page 55).
n.Power connector (see Power connector on page 56).
Remove the TouchPad:
1.Remove 3 Phillips 2.0x2.0 screws (1), and then lift the TouchPad board (2) to remove it.
2.Disconnect the TouchPad cable (1).
3.Remove 3 Phillips 2.0x2.5 screws (2).
Component replacement procedures59 
						

							4.Lift the TouchPad (3), and then remove it (4).
Reverse this procedure to install the TouchPad.
60Chapter 5   Removal and replacement procedures for authorized service provider parts 
						

							Display panelDescriptionSpare part numberBezel For non-touch screens856725-001For non-touch 3D screens856726-001Display panel 15.6" FHD WLED AntiGlare (1920x1080) slim-

						

							1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by