HP LaserJet Enterprise M551dn User Manual

Table 2-9  General Print Settings menu (continued)
First level Second level Values
  Font NumberRange: 0 – 999
Default = 0
  Font PitchRange: 0.44 – 99.99
Default = 10
  Font Point SizeRange: 4.00 – 999.75
Default = 12.00
  Symbol SetSelect from a list of symbol sets.
  Append CR to LF No*
Yes
  Suppress Blank PagesNo*
Yes
  Media Source MappingStandard*
Classic
Default Print Options menu
In the following table, asterisks (*)  indicate the factory default setting.
Table 2-10  Default Print Options menu...

Table 2-10  Default Print Options menu (continued)
First level Second level  Values
Sides    1-sided *
2-sided
2-Sided Format    Book-style *
Flip-style
Edge to Edge    Enabled
Disabled*
24 Chapter 2   Control panel menus ENWW
 

Display Settings menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-11  Display Settings menu
First level Second level Values
Display Brightness   Range: -10 to 10
Default = 0
Language   Select from a list of languages that the
product supports.
Show IP Address   Display*
Hide
Inactivity Timeout   Range: 10 – 300 seconds
Default = 60
Clearable Warnings   On
Job*
Continuable Events   Auto continue (10 seconds)*
Press OK to continue
ENWW Administration menu
25
 

Manage Supplies menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-12  Manage Supplies menu
First level Second levelThird levelFourth level Values
Print Supplies Status     
Supply Settings Black Cartridge Very Low Settings  Stop
Prompt to continue*
Continue
   Low Threshold
Settings 1-100%
  Color Cartridges Very Low Settings  Stop
Prompt to continue*
Continue
   Low Threshold
SettingsCyan Cartridge
Magenta Cartridge
Yellow Cartridge1-100%
  Toner Collection Unit...

Manage Trays menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-13  Manage Trays menu
First level Values
Use Requested Tray Exclusively*
First
Manually Feed Prompt Always*
Unless loaded
Size/Type Prompt Display*
Do not display
Use Another Tray Enabled*
Disabled
Alternative Letterhead Mode Disabled*
Enabled
Blank Pages Auto*
Yes
Override A4/Letter Yes*
No
ENWW Administration menu
27
 

Network Settings menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-14  Network Settings menu
First level Values
I/O Timeout Range: 5 – 300 sec
Default = 15
Jetdirect Menu See the table that follows for details.
Table 2-15  Jetdirect Menu
First level Second level Third level Fourth level Fifth level Values
Information Print Sec Report    Yes
No*
TCP/IP Enable   On *
Off
  Host Name   Use  the arrow
buttons to edit the
host name.
NPIXXXXXX *
  IPv4 Settings Config...

Table 2-15  Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values
   DHCP Renew   Yes
No*
   Primary DNS   Range: 0 – 255
Default =
xxx.xxx.xx.xx
   Secondary DNS   Range: 0 – 255
Default = 0.0.0.0
  IPv6 Settings Enable   On*
Off
   AddressManual Settings Enable On
Off*
     AddressSelect from a
provided list.
   DHCPV6 Policy   Router Specified
Router
Unavailable*
Always
   Primary DNS   Select from a
provided list.
   Secondary DNS   Select from a
provided...

Table 2-15  Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values
Diagnostics Embedded Tests LAN HW Test   Yes
No*
   HTTP Test   Yes
No*
   SNMP Test   Yes
No*
   Data Path Test   Yes
No*
   Select All Tests   Yes
No*
   Execution Time   Range: 1 – 60 hours
Default = 1
   Execute   Yes
No*
  Ping TestDest Type    IPv4
IPv6
   Dest IPv4   Range: 0 – 255
Default =
127.0.0.1
   Dest IPv6   Select from a
provided list.
Default = : : 1
   Packet Size  Default  = 64...

Table 2-15  Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values
   RTT Min  Default  = 0000
   RTT Max  Default  = 0000
   RTT Average  Default  = 0000
   Ping In Progress   Yes
No*
   Refresh   Yes
No*
Link Speed      Auto*
10T Half
10T Full
100TX Half
100TX Full
100TX Auto
1000T Full
ENWW Administration menu
31
 

Troubleshooting menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-16  Troubleshooting menu
First level Second levelThird levelFourth level Values
Exit Troubleshooting
NOTE: This item only
displays if you are
backing out of the
Troubleshooting  menu.
NOTE: The product
shuts down and restarts
when this menu item is
selected.     
Print Event Log     
View Event Log     
Print Paper Path
Page     
Print Quality Pages Print PQ Troubleshooting
Pages   
  Print Diagnostic...