Hitachi Projector CP-X8150 User Manual

							91
SECURITY menu
ItemDescription
SECURITY 
INDICATOR Selecting this item displays the SECURITY INDICATOR dialog. Use 
the ▲/▼ buttons to select ON or OFF.
ON ó OFF
When ON is selected while PIN LOCK or TRANSITION DETECTOR 
is ON, the SECURITY indicator blinks in yellow in the standby mode 
(
 87, 88).
STACK LOCK Selecting this item displays the STACK LOCK dialog. For more 
information, please see 
Instant Stack Guide. 
						

							92
Presentation tools
Presentation tools
The PC-LESS Presentation reads image and audio data from the storage media 
inserted into the USB TYPE A ports and displays the image in the following 
modes.
The PC-LESS Presentation can be started by selecting the USB TYPE A as the 
input source.
This feature allows you to make your presentations without using your computer .
PC-LESS Presentation
- Thumbnail mode (93)
- Full Screen mode  (
97)
- Slideshow mode  (
99)
[Supported storage media] • USB memory (USB memory type, USB hard disk and USB card reader type)
• Some USB memory devices and/or USB hubs may not operate properly.
• USB devices with security software may not work.
• Be careful when inserting or removing a USB device.  (
12, 95)
NOTE
• NTFS is not supported.
NOTE
[Supported format]
• FAT12, FAT16 and FAT32
The projector has the following convenient tools that enable on-screen 
presentations easily and quickly:
- PC-LESS Presentation (
below)
-   Drawing function  (
102)
- USB Display (
107)
-   Network Presentation  
For details of Network Presentation, refer to the  Network Guide and the 
manual for "LiveViewer".
[Supported file format and its extension] • JPEG (.jpeg, .jpg)  * Progressive is not supported.
• Bitmap (.bmp)  *  16bit mode and compressed bitmap is not supported.
• PNG (.png)  * Interlace PNG is not supported.
• GIF (.gif) 
• Movie (.avi, .mov)  *  
Supported video format: Motion-JPEG 
Supported audio format:  
WAV (Linear PCM, Stereo 
16bit), 
IMA-ADPCM
(continued on next page) 
						

							93
Presentation tools
• Files with a resolution larger than the following are not supported. 
    CP-X8150, CP-X8160 : 1024 x 768 (Still)， 768 x 576 (Movie)
   CP-WX8240, CP-WX8255: 1280 x 800 (Still)，  768 x 576 (Movie)
   CP-SX8350: 1400 x 1050 (Still)，  768 x 576 (Movie)
   CP-WU8440, CP-WU8450 : 1920 x 1200 (Still)， 768 x 576 (Movie)
(* Some computers may not support above resolutions.)
• Files with a resolution smaller than 36 x 36 are not supported.
• Files with a resolution smaller than 100 x 100 may not be displayed.
• Movie images with a frame rate higher than 15 fps cannot be displayed.
• Movie images with a bit rate higher than 20 Mbps cannot be displayed.
• Some supported files may not be displayed.
• Only a frame appears when the content of image data cannot be displayed in 
the Thumbnail mode.
• Even with the file format and audio format combinations described above, 
playback of some files may fail. NOTE
Thumbnail Mode
PC-LESS Presentation (continued)
The Thumbnail mode displays the images stored in USB storage devices on the 
Thumbnail screen. Maximum 20 images are displayed in a screen.
If you wish, you can jump into the Full Screen mode or Slideshow mode, after you 
select some images in the Thumbnail mode.
The Thumbnail mode will be started as the primary function of the PC-LESS 
Presentation after selecting the  USB TYPE A as the input source.
Thumbnail menu
Selected image
Thumbnail images 
						

							94
Presentation tools
PC-LESS Presentation (continued)The SETUP menu for the selected image
Item Functions
SETUP Use the ◄/► cursor buttons to switch each setting or use the ► 
cursor button to execute the functions as follows.
RETURN Press the ► cursor button or ENTER to return to the Thumbnail 
screen.
START Switch to ON to set the selected image as the first image in the 
Slideshow. This setting information will be saved in the 
“playlist.
txt” file (
101 ).
STOP Switch to ON to set the selected image as the last image in the 
Slideshow. 
This setting information will be saved in the  “playlist.
txt” file (
101 ).
SKIP Switch to ON to skip the selected image in the Slideshow. This 
setting information will be saved in the 
“playlist.txt” file (
101).
ROTATE Press the ► cursor or ENTER button to rotate the selected still 
image 90 degrees clockwise. 
This setting information will be 
saved in the “playlist.txt” file (
101 ).
You can control the images on the Thumbnail screen with the remote control, 
control panel or Web Remote Control. The following functions can be supported 
while the Thumbnail screen is displayed.
Button operation
Functions
Remote 
control Control panel
Web Remote 
Control
▲/▼/◄/► ▲/▼/◄/►[▲]/[▼]/[◄]/[►] Moves cursor.
PAGE UP
PAGE DOWN -[PAGE UP]
[PAGE DOWN] Switches pages.
ENTER INPUT[ENTER] • Displays the selected image 
on the Full Screen mode when a 
cursor is on a Thumbnail image. 
• Displays the SETUP menu 
(
below) for the selected image 
when a cursor is on a Thumbnail 
image number.
Operating by buttons 
						

							95
Presentation tools
You can also control the images by using the menu on the Thumbnail screen. PC-LESS Presentation (continued)
Operating by the Thumbnail menu
ItemFunctions
Moves to an upper folder.
SORT Allows you to sort files and folders as following.
RETURN Press the ► cursor button or ENTER to return to the Thumbnail 
screen.
NAME UP Sorts in ascending order by file name.
NAME DOWN Sorts in descending order by file name.
DATE UP Sorts in ascending order by file date.
DATE DOWN Sorts in descending order.by file date.
▲/▼ Go to previous / next page.
SLIDESHOW Configures and starts the Slideshow  (
99).
RETURN Press the ► cursor button or ENTER to return to the Thumbnail 
screen.
PLAY Press the ► cursor button or ENTER to start the Slideshow.
START Sets the beginning number of the Slideshow.
STOP Sets the end number of the Slideshow.
INTERVAL Sets the interval time for displaying still images during the 
Slideshow. 
It is not recommend to set the interval time very short something 
like several seconds, because it may take more than several 
seconds to read and display an 
image file if it is stored in very 
deep layer directory or if so many files are stored in the same 
directory.
PLAY MODE
Selects the mode of Slideshow. ONE TIME : Play the Slideshow one time.  
ENDLESS : Play the Slideshow endless.
INPUT Switches the input port.
MENU  Displays the menu.
REMOVE USB Be sure to use this function before removing USB storage device 
from the projector. 
After that, the projector will not recognize USB 
storage devices until you insert it again into the  USB TYPE A 
ports. 
 / Turns the sound on/off for files that contain audio data.
(continued on next page) 
						

							96
Presentation tools
PC-LESS Presentation (continued)
• These operations are not accessible while the projector OSD is displayed.
• The Thumbnail mode is able to display up to 20 files in one page.
• It is not possible to change the input port by using the INPUT button when the 
Thumbnail screen, Slideshow, or Full Screen image is displayed.
• The image quality may deteriorate when playing back audio data included in 
a movie. If you want to give priority to the image quality, turn off the sound by 
setting ♪ to off.
• If one of the  AUDIO IN ports is selected or 
 is selected for USB TYPE A in 
AUDIO SOURCE of the AUDIO menu (
55), ♪ cannot be operated.
• Some error icons will be displayed on the Thumbnail screen .
NOTE
This file seems to be broken or not supported format.A file that cannot be displayed on the 
Thumbnail screen is indicated by a file 
format icon. 
						

							97
Presentation tools
PC-LESS Presentation (continued)
The Full Screen mode shows a full display image. To display in Full Screen mode, 
select an image in the Thumbnail screen. Then press the ENTER button on the 
remote control, the INPUT button on the control panel or click [ENTER] on the 
Web Remote Control.
Full Screen Mode
Button operation
Functions
Remote 
control Control panel
Web Remote 
Control
▼  
► 
or
PAGE DOWN ▼ 
or  
► [▼] 
 
[►]
or
[PAGE DOWN]
Shows the next file.
▲ 
◄
or  
PAGE UP ▲ 
or  
◄[▲] 
[◄]
or  
[PAGE UP]
Shows the previous file.
ENTER
INPUT[ENTER] Displays Thumbnail.
The following operations are enabled in the Full Screen mode while a still image 
is displayed.
Full screen display
Operations for still images 
						

							98
Presentation tools
PC-LESS Presentation (continued)
Button operationFunctions
Remote 
control Control panel
Web Remote 
Control
▲ ▲[▲]
 (Play) /  (Pause) toggle
►►[►] (FF) Fast-forward
◄◄[◄] (REW) Fast-rewind
ENTERINPUT[ENTER] (Stop), Displays Thumbnail.
PAGE DOWN –[PAGE DOWN]
Shows the next file.
PAGE UP –[PAGE UP]Shows the previous file.
• These operations are not accessible while the projector OSD is displayed.
• It is not possible to change the input port by using the  INPUT button when the 
Thumbnail screen, Slideshow, or Full Screen image is displayed. NOTE
A remote control icon and a progress bar are 
displayed when one of the cursor buttons, 
ENTER 
button or INPUT button on the remote control, control 
panel or Web Remote Control is pressed or clicked while a movie is playing in the 
Full Screen mode. The following operations are enabled while the remote control 
icon and progress bar are displayed.  Operations for movie 
						

							99
Presentation tools
PC-LESS Presentation (continued)
Slideshow Mode
While the Slideshow is displayed, the following button operations are enabled 
when still images are displayed, and the same button operations in the Full 
Screen mode are enabled when movies are displayed. 
• These operations are not accessible while the projector OSD is 
displayed.
• It is not possible to change the input port by using the  INPUT button when the 
Thumbnail screen, Slideshow, or Full Screen image is displayed.
•  When the Slideshow mode is set to ONE TIME and the last file is a still image, 
the last slide of the presentation will remain displayed until the  ENTER button 
on the remote control or Web Remote Control, or the  INPUT button on the 
control panel is pressed. NOTE
You can start this function from the Slideshow menu. 
To display the Slideshow 
menu, select the SLIDESHOW button in the Thumbnail menu and press the 
ENTER button on the remote control, INPUT button on the control panel, or click 
[ENTER] on the Web Remote Control. 
Button operation
Functions
Remote 
control Control panel
Web Remote 
Control
ENTER INPUT[ENTER] Displays Thumbnail.
The Slideshow mode displays images in full screen and switches the images at 
intervals set in INTERVAL on the Thumbnail menu (
95).
Operating by buttons 
						

							100
Presentation tools
PC-LESS Presentation (continued)
You can play the Slideshow at your desired configuration. 
Configure the SLIDESHOW item in the Thumbnail menu  
(
95).
Item Functions
SLIDESHOW RETURN
Returns to the Thumbnail mode.  
PLAY Play the Slideshow.
START  Set the beginning number of the Slideshow.
STOP  Set the end number of the Slideshow.
INTERVAL
Sets the interval time for displaying still images during the 
Slideshow. 
It is not recommend to set the interval time very short something 
like several seconds, because it may take more than several 
seconds to read and display an  image file if it is stored in very 
deep layer directory or if so many files are stored in the same 
directory.
PLAY MODE
Selects the mode of Slideshow. ONE TIME : Play the Slideshow one time.  
ENDLESS : Play the Slideshow endless.
• The settings of the Slideshow are saved to the  “playlist.txt” file 
that is stored in the storage media. If the file is not existed, it is generated 
automatically.
• The settings for the START, STOP, INTERVAL, and PLAY MODE are saved to 
the Playlist.
• If the storage media is under the write protection or the  “playlist.txt” is the 
read only type file, it is impossible to change the settings of the Slideshow .
NOTE
Operating by SLIDESHOW in the Thumbnail menu