Getnet Router GA-324WA User Manual

GA-324WA User Manual 
Field Description 
Reboot Click it to reboot the router. 
 
3.7.2   Upgrade 
Choose Admin > Upgrade. The Upgrade  page that is displayed contains 
Upgrade Firmware and  Backup/Restore. 
3.7.2.1 Upgrade Firmware 
Click Upgrade Firmware  in the left pane. The page shown in the following figure 
appears.In this page, you can upgrade the firmware of the router. 
I  Note: 
Do not turn off your router or press the  Reset button while this procedure is in 
progress. 
 
 
The following...

GA-324WA User Manual 
3.7.2.2 Backup/Restore 
Click Backup/Restore . The page shown in the following figure appears. In this 
page, you can backup the current settings  to a file and restore the settings from 
the file which was saved previously. 
  Note: 
Do not turn off your router or press the  Reset button while these procedures 
are in progress. 
 
 
The following table describes the parameters and buttons of this page: 
Field Description 
Save Settings to 
File Click it and select the path. Then...

GA-324WA User Manual 
 
3.7.4   Password 
Choose Admin > Password . The page shown in the following figure appears. In 
this page, you can change the password of the user, including admin and user. 
By default, the super user name and password are  admin and admin . The 
common user name and password are  user and  user. 
 
 
The following table describes the parameters of this page: 
Field Description 
User Name You can choose  admin or user. 
New Password Enter the password to which you want to change...

GA-324WA User Manual 
Field Description 
Password take effect. It keeps the default password. 
 
3.7.5   Time Zone 
Choose Admin > Time Zone . The page shown in the following figure appears. In 
this page, you can set the system time manually or get the system time from the 
time server. 
 
 
3.8   Diagnostic 
In the navigation bar, choose  Diagnostic. The Diagnostic  page that is displayed 
contains  Ping, ATM Loopback,  ADSL and Diagnostic . 
3.8.1   Ping 
Choose Diagnostic  > Ping . The page shown in...

GA-324WA User Manual 
 
 
The following table describes the parameters and buttons in this page: 
Field Description 
Host Enter the IP address. 
PING Click it to begin to Ping the host address. 
 
3.8.2   ATM Loopback 
Choose Diagnostic  > ATM Loopback . The page shown in the following figure 
appears. In this page, you can use VCC loopback function to check the 
connectivity of the VCC. 
 
3.8.3   ADSL 
Choose Diagnostic  > ADSL . The page shown in the following figure appears. It 
is used for ADSL...

GA-324WA User Manual 
 
 
Click Start to begin ADSL tone diagnostics. 
3.8.4   Diagnostic Test 
Choose Diagnostic > Diagnostic Test . The page shown in the following figure 
appears. In this page, you can test the DSL connection. 
  
Click  Run Diagnostic Test  to begin testing. 
73