GE Logiq 9 Service Manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-33
8-5-6 Loading Software
It may be a good idea to load software before replacing the covers.
Refer to loading Base Image software and loading Applications software.
1.) Plug in the power cable to the system, connect the system to the AC outlet and turn on the circuit 
breaker.
2.) Power up the system to begin the software load.
8-5-7 Replace Covers
1.) With the software...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-34 Section 8-6 - BEP CD-RW Drive Replacement Procedure (BEP 2.x and above only)
Section 8-6
BEP CD-RW Drive Replacement Procedure (BEP 2.x and above only)
8-6-1 Manpower
One person, 1 hour + travel
8-6-2 Tools
Phillips screwdriver
8-6-3 Preparations (click here to view the cover removal video)
1.) Power Down/Shutdown the system as described in Section 4-3-2 on page 4-3.
2.) Remove the left- and/or...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-35
8-6-4 CD-RW Drive Removal Procedure (cont’d)
4.) Peel back the adhesive trim as shown in Figure 8-35 on page 8-35 . Figure 8-34  CD-RW Side Screw
Figure 8-35  BEP Front Adhesive Trim 

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-36 Section 8-6 - BEP CD-RW Drive Replacement Procedure (BEP 2.x and above only)
8-6-4 CD-RW Drive Removal Procedure (cont’d)
5.) Remove the two screws in the front of the CD-RW drive as shown in Figure 8-35 on page 8-35 .
6.) Slide the CD-RW drive out the front of the BEP as shown in Figure 8-36 on page 8-36 .
Figure 8-36  CD-RW Removal 

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-37
8-6-5 CD-RW Drive Replacement Procedure
1.) Insert the new CD-RW Drive into the drive bay and secure it in the front with the two screws 
previously removed. refer to Figure 8-35 on page 8-35 .
2.) Attach the one screw to the side of the CD-RW Drive through the rack. refer to Figure 8-
34 on page 8-35 .
3.) Attach the Power, IDE and Audio cables to the back of the...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-38 Section 8-6 - BEP CD-RW Drive Replacement Procedure (BEP 2.x and above only)
8-6-6 CD-RW Drive Replacement Procedure
5.) Connect the cover fan power cable and replace the side cover from the BEP.
NOTE: When replacing the BEP Cover, ensure that you start it at the bottom to get the cover lip 
between the BEP chassis and AC transformer cover. Slide it forward and secure it.
6.) Replace the front cover...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-39
Section 8-7
BEP MOD Replacement Procedure (BEP 2.x and above only)
8-7-1 Manpower
One person, 1 hour + travel
8-7-2 Tools
Phillips screwdriver
8-7-3 Preparations (click here to view the cover removal video)
1.) Power Down/Shutdown the system as described in Section 4-3-2 on page 4-3.
2.) Remove the left- and/or right-side covers as shown in Section 8-2-2 on page 8-5....

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-40 Section 8-7 - BEP MOD Replacement Procedure (BEP 2.x and above only)
8-7-4 MOD Drive Removal Procedure (cont’d)
4.) Peel back the adhesive trim as shown in Figure 8-41 on page 8-40 . Figure 8-40  MOD Side Screw
Figure 8-41  BEP Front Adhesive Trim 

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-41
8-7-4 MOD Drive Removal Procedure (cont’d)
5.) Remove the two screws in the front of the MOD drive as shown in Figure 8-42 on page 8-41 .
6.) Slide the MOD out the front of the BEP as shown in Figure 8-42 on page 8-41 .
7.) Remove the four screws, two on each side, to remove the top cover and side rails from the MOD 
case.Figure 8-42  MOD Removal
Figure 8-43  MOD with...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-42 Section 8-7 - BEP MOD Replacement Procedure (BEP 2.x and above only)
8-7-4 MOD Drive Removal Procedure (cont’d)
8.) Remove the power and IDE Cables from the MOD. Refer to Figure 8-45 on page 8-42 .
9.) Refer to Figure 8-45 on page 8-42  and Figure 8-46 on page 8-43 , go through the side of the MOD 
case to remove the four screws holding the MOD to the case.Figure 8-44  MOD Rails and Top Cover
Figure...