Fujifilm Camera Finepix S4800 Owners Manual

							75
Menus
Using the Menus: Shooting Mode
PP FINEPIX COLOR FINEPIX COLOR
Enhance contrast and color saturation or take pic-
tures in black and white.
OptionOptionDescriptionDescription
STANDARD Standard contrast and saturation.  
Recommended in most situations.
CHROME Vivid contrast and color.  Choose 
for vivid shots of flowers or en-
hanced greens and blues in land-
scapes.
B&W Take pictures in black and white.
Settings other than STANDARD  are shown by an 
icon in the display.
1 Notes
•  FINEPIX COLOR is not reset when the camera is 
turned off or another shooting mode is selected.
• The effects of  CHROME vary from scene to scene 
and may be difficult to discern with some sub-
jects.  Depending on the subject, the effects of 
CHROME  may not be visible in the display.
DD WHITE BALANCE WHITE BALANCE
For natural colors, choose a setting that matches 
the light source.
OptionOptionDescriptionDescription
AUTO White balance adjusted automatically.
h Measure a value for white balance.
i For subjects in direct sunlight.
j For subjects in the shade. 
k Use under “daylight” fluorescent lights.
l Use under “warm white” fluorescent lights.
m Use under “cool white” fluorescent lights.
n Use under incandescent lighting.
If 
AUTO  does not produce the desired results (for 
example, when taking close-ups), select h and 
measure a value for white balance or choose the 
option that matches the light source.
1 Notes
•  At settings other than  h, auto white balance is used 
with the flash.  Lower the flash ( P 37) to take pictures 
at other settings.
•  Results vary with shooting conditions.  Play pictures  back after shooting to check colors in the monitor. 
						

							76
Using the Menus: Shooting Mode
■■  hh: Custom White Balance: Custom White Balance
Choose  h to adjust white balance for unusual 
lighting conditions.  White balance measurement 
options will be displayed; frame a white object so 
that it fills the monitor and press the shutter but-
ton all the way down to measure white balance.
If “ COMPLETED! ” is displayed, press MENU/OK  to set 
white balance to the measured value.  This value 
can be reselected by pressing  MENU/OK when cus-
tom white balance options are displayed.
If “ UNDER ” is displayed , raise exposure compensa-
tion ( P 45) and try again.  
If “ OVER ” is displayed , lower exposure compensa-
tion and try again.
2 Tip
To give a deliberate color cast to your photographs, 
measure a value for custom white balance using a col-
ored instead of a white object.
HH SHARPNESS SHARPNESS
Choose whether to sharpen or soften outlines.
•  HARD : Use for sharp outlines when photograph-
ing such subjects as buildings and text.
•  STANDARD : Standard sharpness.  Best choice in 
most situations.
•  SOFT : Use for soft outlines in portraits and similar 
subjects. 
						

							77
Menus
Using the Menus: Shooting Mode
CC PHOTOMETRY PHOTOMETRY
Choose how the camera meters exposure when 
Intelligent Face Detection is off.
•  o MULTI : Automatic scene recognition is used 
to adjust exposure for a wide range of shooting 
conditions.
•  p SPOT : The camera meters lighting conditions 
at the center of the frame.  Recommended when 
the background is much brighter or darker than 
the main subject.  Can be used with focus lock 
( P  34) to meter off-center subjects.
•  q AVERAGE : Exposure is set to the average for 
the entire frame.  Provides consistent exposure 
across multiple shots with the same lighting, 
and is particularly effective for landscapes and 
portraits of subjects dressed in black or white.FF AF MODE AF MODE
This option controls how the camera selects the 
focus area when Intelligent Face Detection is off 
( P  32).  Regardless of the option selected, the 
camera will focus on the subject in the center of 
the monitor when macro mode is on ( P 36).
•  r  CENTER : The camera focuses on the subject in 
the center of the frame.  This option can be used 
with focus lock ( P 34).
•  s  MULTI : When the shutter button is pressed 
halfway, the camera detects high-contrast sub-
jects near the center of the frame and selects 
the focus area automatically (if the focus frame is 
not displayed, select r CENTER  and use focus 
lock; P  34).
P
F2. 8
80PROGRAM SHIFT
Focus frame
Press 
halfway 
						

							78
Using the Menus: Shooting Mode
• t AREA : The focus position  
can be chosen manually by 
pressing the selector up, 
down, left, or right and press-
ing  MENU/OK  when the focus 
brackets are in the desired position.  Choose for 
precise focus when the camera is mounted on a 
tripod.  Note that exposure is set for the subject 
in the center of the frame; to meter an off-center 
subject, use AF/AE lock ( P 34).
• u CONTINUOUS : The camera continually adjusts 
focus to reflect changes in the distance to the 
subject even when the shutter button is not 
pressed (note that this increases the drain on the 
battery).
•  x TRACKING : Position the 
subject in the center focus 
area and press the selector 
left to select tracking. Focus 
will track the subject as it 
moves through the frame. 
FF MOVIE AF MODE MOVIE AF MODE
This option controls how the camera selects the 
focus area for movies.
OptionOptionDescriptionDescription
r CENTER The camera focuses on the subject 
in the center of the frame.
u CONTINUOUS The camera continuously adjusts 
focus to reflect changes in the dis-
tance to subjects near the center of 
the frame.
1 Note
Note that in u mode, the camera focuses continu-
ously, increasing the drain on the battery, and that the 
sound of the camera focusing may be audible.SET CANCEL
SELECT AF AREA
START TRACKING
P 
250 PROGRAM SHIFT F3. 1  
						

							79
Menus
Using the Menus: Shooting Mode
JJ AE BKT EV STEPS AE BKT EV STEPS
Choose the size of the exposure bracketing incre-
ment used when  O (AE bracketing) is selected in 
continuous shooting mode ( P 41).
Choose from increments of ±
1/3 EV,  ±2/3 EV,  and 
±1  E V.
II FLASH FLASH
Adjust flash brightness.  Choose from values be-
tween +
2/3 EV and –2/3 EV.  The default setting is ±0.  
Note that the desired results may not be achieved 
depending on shooting conditions and the dis-
tance to the subject. 
						

							80
Using the Menus: Playback Mode
Using the Playback MenuUsing the Playback Menu
1 Press the a button to enter play-
back mode.
2 Press  MENU/OK  to display the play-
back menu.
3 Press the selector up or down to  highlight the desired menu item.
4  Press the selector right to display op-tions for the highlighted item.
5 Press the selector up or down to highlight the desired option.
6 Press  MENU/OK  to select the high-
lighted option.
Playback Menu OptionsPlayback Menu Options
The following options are available:
OptionOptionDescriptionDescription
kk PHOTOBOOK ASSIST PHOTOBOOK ASSIST Create books from your favorite photos 
(
P  52).
bb IMAGE SEARCH IMAGE SEARCH Search for pictures by date, subject, 
scene, file type, or rating (
P 54).
AA  ERASE ERASE
Delete all or selected pictures ( P 55).
jj MARK FOR UPLOAD MARK FOR UPLOAD Select pictures for upload to YouTube 
or FACEBOOK (
P 81).
II SLIDE SHOW SLIDE SHOW View pictures in a slide show ( P 83).
BB  RED EYE REMOVAL  RED EYE REMOVAL Create copies with reduced red eye 
(
P  84).
DD  PROTECT PROTECT Protect pictures from accidental dele-
tion (
P 85).
GG  CROP CROP Create cropped copies of pictures 
(
P 86).
O  RESIZE Create small copies of pictures ( P 87).
CC  IMAGE ROTATE IMAGE ROTATE
Rotate pictures (P 88).
FF  VOICE MEMO VOICE MEMO
Add voice memos to pictures ( P 89).
KK  PRINT ORDER PRINT ORDER (DPOF)(DPOF)
Select pictures for printing on DPOF- 
and PictBridge-compatible devices 
(P  61).
JJ  DISP. ASPECTDISP. ASPECT Choose how High Definition (HD) de-
vices display pictures (
P 90). 
						

							81
Menus
Using the Menus: Playback Mode
■■  Add/Remove Items in the Upload Queue  Add/Remove Items in the Upload Queue
1  Select an upload destination.
2 Press MENU/OK .
3  Select items to be added to, or re-
moved from, the upload queue.
4 Press  MENU/OK  to confirm.
•  Items not in the upload queue will  be added to the queue when you 
select them and press  MENU/OK.
• 
Items in the upload queue will be 
removed from the queue when you 
select them and press  MENU/OK.
5 Repeat steps 3 and 4 as necessary 
and add or remove items.
When finished, press DISP/BACK  to 
save the settings.
2 Tips
• 
Yo uTu b e , FACEBOOK  or MyFinePix.com  is displayed 
to indicate items queued for upload.
•  Only movies can be selected for upload to YouTube.
•  Only photos can be selected for upload to MyFinePix. com.
• During playback, selected pictures are indicated by  j Yo uTu b e , j FACEBOOK  or j MyFinePix.com  
icons.
jj MARK FOR UPLOAD MARK FOR UPLOAD
You can select images and movies to be queued for upload to YouTube, Facebook and MyFinePix.com.
Select  j MARK FOR UPLOAD  in the playback menu. 
						

							82
Using the Menus: Playback Mode
■■  Removing All Items From the Upload Queue  Removing All Items From the Upload Queue
You can remove all items from the upload queue.
1 Select  RESET ALL .
The screen for removing all items 
from the upload queue is displayed.
RESET ALL OK? IT MAY TAKE A WHILE IT MAY TAKE A WHILE 
OK
CANCEL
SET 
2 Select  OK.
3 Press  MENU/OK .
All items are removed from the up-
load queue.
1 Note
If there are many items in the upload queue when you 
select to remove all items from the queue, it may take 
some time to remove them. To cancel, press  DISP/BACK.
■■  Upload Items Upload Items
Items added to the upload queue using the cam-
era can be easily uploaded from a computer by 
using the MyFinePix Studio.
Install MyFinePix Studio ( P 66).
1 Note
This feature is available only when using a computer 
running Windows. 
						

							83
Menus
Using the Menus: Playback Mode
II SLIDE SHOW SLIDE SHOW
View pictures in an automated slide show.  Choose the type of show and press  MENU/OK to start.  Press 
DISP/BACK  at any time during the show to view on-screen help.  When a movie is displayed, movie play-
back will begin automatically, and the slide show will continue when the movie ends.  The show can 
be ended at any time by pressing  MENU/OK.
OptionOptionDisplayed inDisplayed in
NORMAL Press selector left or right to go back or skip ahead one frame.  Select  FADE- IN for fade transitions between 
frames.
FADE- IN
NORMAL 
gAs above, except that camera automatically zooms in on faces selected with Intelligent Face detection.
FADE- IN g
MULTIPLE Display several pictures at once.
1 Note
The camera will not turn off automatically while a slide show is in progress. 
						

							84
Using the Menus: Playback Mode
BB RED EYE REMOVAL RED EYE REMOVAL
If the current picture is marked with a 
g icon to indicate that it was taken with Intelligent Face De-
tection, this option can be used to remove red-eye.  The camera will analyze the image; if red-eye is 
detected, the image will be processed to create a copy with reduced red-eye.
REMOVAL OK?
YES CANCELREMOVING
1 Notes
•  Red eye may not be removed if the camera is unable to detect a face or the face is in profile.  Results may differ 
depending on the scene.  Red eye can not be removed from pictures that have already been processed using 
red-eye removal or pictures created with other devices.
•  The amount of time needed to process the image varies with the number of faces detected.
•  Copies created with  B RED EYE REMOVAL are indicated by a e icon during playback.